You may also like
SATCO Lighting S8604 6.5W, LED MR16 LED, 3000K, 40 degree Beam Angle, GU10 Base, 120V, Carded
Model: SATCO-S8604
SATCO Lighting S8604 6.5W, LED MR16 LED, 3000K, 40 degree Beam Angle, GU10 Base, 120V, Carded6.5 Watt - LED MR16 LED - 3000K - 40 deg. Beam Angle - GU10 base - 120 Volt - Carded
Satco Lighting
$10.64
SATCO Lighting S9380 4.5W, LED MR16 LED, 3000K, 40 degree Beam Angle, GU10 Base, 120V
4.5 Watt - LED MR16 LED - 3000K - 40 deg. Beam Angle - GU10 base - 120 Volt
Manufacturer Resources
Spec Sheet
Product Specs
- Amps:
- 0.038A
- Avg Rated Hours:
- 25000
- Burning Position:
- Universal
- CA Web Text:
- Lawful for sale
- CCT Selectable:
- No
- CRI:
- 80
- DLC Approved:
- No
- Dimmable:
- Yes
- Enclosure Rating:
- Enclosed Rated Lamp
- FCC Compliant:
- Yes
- Housing Color:
- White
- Lamp Base:
- Bi Pin GU10
- Lamp Filament:
- LED
- Lamp Shape:
- MR16
- Lens Finish:
- Array White
- Lensed:
- Yes
- Lumens:
- 360L
- Operating Frequency:
- 60Hz
- Product Type:
- MR
- Subcategory:
- LED
- Technology:
- LED
- Three-Way:
- No
- Warranty:
- 5 Year Limited - 10 hr per day
- Product Group:
- Indoor Lighting
- Product Subgroup:
- Light Bulbs
- Incandescent Equivalent:
- 35W
- Location Rating:
- Damp
- Location Indoor/ Outdoor:
- Indoor
- Product Voltage:
- 120V
- Beam Spread Angle:
- 40
- Light Temperature:
- 3000K
- Product Category:
- Light Bulbs
- Product Wattage:
- 4.5W
- Product Weight:
- 0.08 lb
Satco Lighting S9380 – Frequently Asked Questions
1) Will the Satco S9380 MR16 fit a GU10 twist-lock socket, or do I need a pin-base lamp?
The S9380 uses a bi-pin GU10 base, which is the twist-and-lock type found in line-voltage track heads and recessed MR16 trims. It runs directly on 120V at 60Hz, so no transformer is involved. If your fixture has a GU5.3 two-pin socket fed by a 12V magnetic or electronic transformer, this lamp will not work in it.
2) Can I use this LED MR16 in a fully enclosed recessed can or a sealed shower trim?
Yes on the enclosed fixture. The S9380 is an enclosed rated lamp, so heat buildup in a closed can or glass-covered fixture won't shorten its life the way it would on a non-enclosed-rated LED. It also carries a damp location rating, which covers a shower trim or a covered exterior soffit that never sees direct water. It is classed as an indoor lamp, so don't put it anywhere wet-rated.
3) Is a 40 degree beam angle right for retail display lighting or general room fill?
Forty degrees is a flood beam, wide enough to wash a merchandise shelf, a wall of artwork, or a kitchen counter without the hard hot spot of a narrow spot. For pinpointing a single object from a high ceiling you'd want a tighter beam in the 10 to 25 degree range instead. The lamp is lensed with an array white lens face, which softens the source appearance in open track heads.
4) How long do these last before maintenance crews have to go back up the ladder?
The S9380 is rated at 25,000 average hours. On a retail schedule of 12 hours a day that is roughly 5.7 years of service, which is why MRO and property teams relamp whole zones to LED rather than chasing halogen failures. Burning position is universal, so it performs the same aimed up, down, or horizontally.
5) Is this a DLC listed lamp for a utility rebate application?
No. The S9380 is not DLC approved, so it will not qualify for a utility program that requires products on the DesignLights Consortium list. It is FCC compliant and stated as lawful for sale in California.
6) What exactly do I order, and does it come in more than one finish?
Order Satco part number S9380. It is a single configuration: 4.5W LED MR16, 3000K, 40 degree flood, GU10 base, 120V, with a white housing. There is one finish, white, so there is nothing else to specify.
7) Can this lamp be used with a three-way switch setup?
No. The S9380 is not a three-way lamp, so it will run at a single output level in a three-way socket. For adjustable output, use it on a dimmer instead, which it does support.
How fast can I get the Satco Lighting S9380 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Satco Lighting S9380 come with a warranty?
Absolutely. The Satco Lighting S9380 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Satco Lighting S9380?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Satco Lighting S9380 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.