You may also like
SATCO Lighting S9382 6.5W, LED MR16 LED, 2700K, 40 degree Beam Angle, GU10 Base, 120V
6.5 Watt - LED MR16 LED - 2700K - 40 deg. Beam Angle - GU10 base - 120 Volt
Manufacturer Resources
Spec Sheet
Product Specs
- Amps:
- 0.054A
- Avg Rated Hours:
- 25000
- Burning Position:
- Universal
- CA Web Text:
- Lawful for sale
- CCT Selectable:
- No
- CRI:
- 80
- DLC Approved:
- No
- Dimmable:
- Yes
- Enclosure Rating:
- Enclosed Rated Lamp
- FCC Compliant:
- Yes
- Housing Color:
- White
- Lamp Base:
- Bi Pin GU10
- Lamp Filament:
- LED
- Lamp Shape:
- MR16
- Lens Finish:
- Array White
- Lensed:
- Yes
- Lumens:
- 500L
- Operating Frequency:
- 60Hz
- Product Type:
- MR
- Subcategory:
- LED
- Technology:
- LED
- Three-Way:
- No
- Warranty:
- 5 Year Limited - 10 hr per day
- Product Group:
- Indoor Lighting
- Product Subgroup:
- Light Bulbs
- Incandescent Equivalent:
- 50W
- Location Rating:
- Damp
- Location Indoor/ Outdoor:
- Indoor
- Product Voltage:
- 120V
- Beam Spread Angle:
- 40
- Light Temperature:
- 2700K
- Product Category:
- Light Bulbs
- Product Wattage:
- 6.5W
- Product Weight:
- 0.08 lb
Satco Lighting S9382 – Frequently Asked Questions
1) Will the Satco S9382 MR16 drop into my existing GU10 track heads without a transformer?
Yes. The S9382 is a line voltage lamp: GU10 bi-pin twist-lock base, 120V, 60Hz. It wires straight to line power, so no low voltage transformer is used or needed. If your fixtures are 12V MR16 with a GX5.3 two-pin base fed by a magnetic or electronic transformer, this lamp will not fit or work there.
2) Can I use the Satco S9382 in a fully enclosed recessed can or a closed glass fixture?
Yes, it is an enclosed rated lamp, so a sealed recessed housing or an enclosed decorative fixture is acceptable. It is also damp location rated and listed for indoor use, which covers a covered porch ceiling or a bathroom, but not direct wet exposure.
3) What incandescent or halogen MR16 does this 6.5W LED replace, and will the rooms look as bright?
It replaces a 50W halogen MR16 and puts out 500 lumens at 6.5 watts, drawing 0.054A. Output is in the same range buyers expect from a 50W halogen, and the 2700K color keeps the warm halogen look rather than shifting cool.
4) Is this Satco GU10 lamp dimmable on my existing wall dimmers?
The S9382 is a dimmable LED. For best results it wants a dimmer rated for LED loads; older incandescent dimmers were sized for large halogen wattages and a bank of 6.5W lamps may fall under the dimmer's minimum load. The lamp itself is not a three-way type, so it will not step through levels on a three-way socket.
5) Will the 2700K color match the halogen lamps already in my other fixtures?
Yes, 2700K is the warm white that matches standard halogen and incandescent, so a partial relamp will not read as a color mismatch down a corridor. CRI is 80, which is standard for commercial and hospitality spaces. Color is fixed, not selectable, so every lamp out of the box is the same 2700K.
6) Is the Satco S9382 DLC listed for utility rebate paperwork?
No. The S9382 is not DLC approved, so it will not qualify under rebate programs that require a DesignLights Consortium listing. It is FCC compliant and noted as lawful for sale in California.
7) Can these Satco MR16 lamps be aimed straight up or sideways in sconces and uplights?
Burning position is universal, so base up, base down, or horizontal are all acceptable. That covers recessed downlights, track heads aimed at a wall, and uplight cans in a floor or cove.
8) How many of these GU10 lamps can I put on one 20 amp lighting circuit?
Each lamp draws 0.054A at 120V, so current per lamp is negligible compared to the 50W halogen it replaces. The practical limit on a retrofit is usually the dimmer or driver channel, not the branch circuit, and standard practice is to load a lighting circuit to no more than 80 percent of its rating.
How fast can I get the Satco Lighting S9382 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Satco Lighting S9382 come with a warranty?
Absolutely. The Satco Lighting S9382 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Satco Lighting S9382?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Satco Lighting S9382 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.