SATCO Lighting S9631 6.5W, LED...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$11.07
Satco Lighting SAT-S9631 6.5 Watt - LED R20 - 3000K - 107 deg. Beam Angle - Medium base - 120 Volt - Dimmable

SATCO Lighting S9631 6.5W, LED R20, 3000K, 107 degree Beam Angle, Medium Base, 120V, Dimmable

(No reviews yet) Write a Review

Model: S9631
Selected Finish is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$11.07
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

SATCO Lighting S9631 6.5W, LED R20, 3000K, 107 degree Beam Angle, Medium Base, 120V, Dimmable

6.5 Watt - LED R20 - 3000K - 107 deg. Beam Angle - Medium base - 120 Volt - Dimmable

Manufacturer Resources

Spec Sheet

Product Specs

Amps:
0.054A
Avg Rated Hours:
25000
Burning Position:
Universal
CA T20 Alt Sub:
S8577
CA Web Text:
Non-Compliant
CCT Selectable:
No
CRI:
80
DLC Approved:
No
Dimmable:
Yes
Enclosure Rating:
Enclosed Rated Lamp
FCC Compliant:
Yes
Housing Color:
Gray
Lamp Base:
Medium
Lamp Filament:
LED
Lamp Shape:
R20
Lens Finish:
Frost
Lensed:
Yes
Lumens:
525L
Operating Frequency:
60Hz
Product Type:
Reflector
Subcategory:
LED
Technology:
LED
Three-Way:
No
Warranty:
5 Year Limited - 10 hr per day
Product Group:
Indoor Lighting
Product Subgroup:
Light Bulbs
Incandescent Equivalent:
45W
Location Rating:
Damp
Location Indoor/ Outdoor:
Indoor
Product Voltage:
120V
Beam Spread Angle:
107
Light Temperature:
3000K
Product Category:
Light Bulbs
Product Wattage:
6.5W
Product Weight:
0.09 lb

Satco Lighting S9631 – Frequently Asked Questions

1) Can I use this R20 LED in a fully enclosed fixture or a closed recessed can?
Yes. The S9631 is an enclosed rated lamp, so it can run inside a sealed fixture or a closed recessed housing without voiding its thermal rating. It also mounts in any burning position, base up, base down, or horizontal.
2) Is this Satco R20 LED okay in a bathroom or a covered porch?
It carries a damp location rating and is classified for indoor use. That covers a bathroom, a shower area outside direct spray, or a covered soffit that stays dry. It is not a wet location lamp, so skip open exterior fixtures exposed to rain.
3) Can the Satco S9631 be sold or installed in California?
No. The S9631 is flagged non-compliant for California Title 20. Satco lists S8577 as the California alternate substitute for this lamp, so specify that one for projects in California.
4) Will a 6.5W R20 LED dim on my existing incandescent dimmer?
The S9631 is a dimmable lamp on 120V line voltage. Because it draws only 0.054A, a bank of them may fall below the minimum load of an older incandescent dimmer, which shows up as flicker or a dead spot at the bottom of the slider. On new work, pair it with a dimmer rated for LED loads.
5) Is a 107 degree beam angle too wide for recessed cans over a kitchen counter?
107 degrees is a wide flood, not a spot. With a frosted lens, it washes a broad area with soft light rather than throwing a defined pool, so it suits general downlighting, hallway cans, and wall-wash in lobbies or corridors. If you want accent punch on artwork or a display, use a narrower PAR or BR spot instead.
6) Will 3000K match the other bulbs already in my building?
The S9631 is a fixed 3000K warm white with 80 CRI. It is not color selectable, so it will match other 3000K lamps but will read noticeably warmer alongside 4000K and cooler alongside 2700K. For a fleet of units, standardize on one CCT across the property to avoid mismatched cans on the same ceiling.
7) Can I use this LED R20 in a three-way lamp socket?
Not as a three-way. The S9631 is single-level, so in a three-way socket it will light at one output regardless of switch position. For dimming, use it on a dimmer circuit instead, which it does support.
8) How long will these last before maintenance has to relamp?
Rated life on the S9631 is 25,000 average hours. At roughly 12 hours a day in a corridor or common area, that is several years between relamps, which is the case MRO buyers make when swapping out 45W incandescent floods that burn 1,000 to 2,000 hours.
9) Does this Satco R20 qualify for a DLC utility rebate?
No. The S9631 is not DLC approved, so it will not qualify under programs that require a DesignLights Consortium listing. It is FCC compliant for electromagnetic interference.
10) What exactly am I ordering, and is there more than one version of the S9631?
One configuration only: Satco part number S9631, an LED R20 reflector with a gray housing and a frosted lens. There are no finish, wattage, or color temperature variants to pick, so the part number fully specifies the lamp.
How fast can I get the Satco Lighting S9631 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Satco Lighting S9631 come with a warranty?
Absolutely. The Satco Lighting S9631 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Satco Lighting S9631?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Satco Lighting S9631 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!