SATCO Lighting S9632 6.5W, LED...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$4.95
Satco Lighting SAT-S9632 6.5 Watt - LED R20 - 4000K - 107 deg. Beam Angle - Medium base - 120 Volt - Dimmable

SATCO Lighting S9632 6.5W, LED R20, 4000K, 107 degree Beam Angle, Medium Base, 120V, Dimmable

(No reviews yet) Write a Review

Model: S9632
Selected Finish is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$4.95
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

SATCO Lighting S9632 6.5W, LED R20, 4000K, 107 degree Beam Angle, Medium Base, 120V, Dimmable

6.5 Watt - LED R20 - 4000K - 107 deg. Beam Angle - Medium base - 120 Volt - Dimmable

Manufacturer Resources

Spec Sheet

Product Specs

Amps:
0.054A
Avg Rated Hours:
25000
Burning Position:
Universal
CA T20 Alt Sub:
S8491
CA Web Text:
Non-Compliant
CCT Selectable:
No
CRI:
80
DLC Approved:
No
Dimmable:
Yes
Enclosure Rating:
Enclosed Rated Lamp
FCC Compliant:
Yes
Housing Color:
Gray
Lamp Base:
Medium
Lamp Filament:
LED
Lamp Shape:
R20
Lens Finish:
Frost
Lensed:
Yes
Lumens:
525L
Operating Frequency:
60Hz
Product Type:
Reflector
Subcategory:
LED
Technology:
LED
Three-Way:
No
Warranty:
5 Year Limited - 10 hr per day
Product Group:
Indoor Lighting
Product Subgroup:
Light Bulbs
Incandescent Equivalent:
45W
Location Rating:
Damp
Location Indoor/ Outdoor:
Indoor
Product Voltage:
120V
Beam Spread Angle:
107
Light Temperature:
4000K
Product Category:
Light Bulbs
Product Wattage:
6.5W
Product Weight:
0.09 lb

Satco Lighting S9632 – Frequently Asked Questions

1) What incandescent R20 wattage does a 6.5W LED R20 replace?
It replaces a 45W incandescent R20, putting out 525 lumens on 6.5 watts. For a property manager swapping a fleet of 45W reflector lamps, light output stays in the same range while the load per socket drops to 0.054A.
2) Can I use this LED R20 in a fully enclosed fixture?
Yes, the S9632 is an enclosed rated lamp, so closed ceiling fixtures and glass-globe housings are fine. It is also damp location rated and carries a universal burning position, so base-up recessed cans, base-down, and horizontal mounting all work.
3) Will 4000K match the other bulbs in my building?
The S9632 is fixed at 4000K, a neutral white, with an 80 CRI. It is not a CCT selectable lamp, so you cannot field-adjust it to match 2700K or 3000K lamps elsewhere. If your other openings are warm white, these will read noticeably cooler side by side, so standardize a whole area at a time.
4) Can I ship the Satco S9632 to a job in California?
No. The S9632 is marked non-compliant for California, and Satco lists the S8491 as the California Title 20 alternate substitute. For work in California, order the S8491 instead.
5) Is this R20 LED okay for a covered exterior entry or a bathroom?
Damp location rated and classified for indoor use. A covered, non-wet area such as a bathroom, shower-adjacent ceiling can, or a soffit that never sees direct rain or splash is within the rating. For open exterior locations exposed to weather you need a wet-location rated lamp instead.
6) Does the Satco S9632 dim, and is it a three-way bulb?
It dims on a 120V dimmer, but it is not a three-way lamp, so it won't step through levels in a three-way socket. If the fixture uses a three-way switch and socket you want a three-way LED instead.
7) Is a 107 degree beam angle too wide for recessed can lighting?
A 107 degree spread is a flood, not a spot. It washes a broad area, which suits general ceiling cans, corridor and hallway lighting, and over-counter fill. If you need tight accent punch on artwork or merchandise, pick a narrow-beam PAR or MR lamp instead. The lens is frosted, which softens the edge of the beam and the visible source.
8) Does this Satco LED R20 qualify for DLC-based utility rebates?
It is not DLC approved, so it will not qualify under rebate programs that require a DesignLights Consortium listing. It is FCC compliant.
9) How long does the 6.5W LED R20 last before relamping?
Rated for 25,000 average hours. On a 12-hour-a-day corridor or lobby schedule that works out to roughly 5.7 years of service, which is why MRO buyers use these to get off an annual incandescent relamp cycle.
10) What does the Satco S9632 look like in the fixture?
Gray housing with a frosted lens over the LED. In an open or shallow can the gray body is visible from below, so if you are matching the look of white-bodied reflector lamps across a row of fixtures, expect a difference.
How fast can I get the Satco Lighting S9632 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Satco Lighting S9632 come with a warranty?
Absolutely. The Satco Lighting S9632 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Satco Lighting S9632?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Satco Lighting S9632 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!