Schaub 211053 Avenue Cabinet Pull with 5" Center to Center and Standard Mounting

The Schaub 211053 Avenue is drilled at 5 inch center-to-center, so it will not land on 4 inch holes. The Omnia 1968/102 is a modern forged solid brass cabinet pull with 4 inch center-to-center spacing and will drop onto existing 4 inch bores. The Trimco 562 series drawer pulls are offered in 3-1/2 inch, 4 inch and 96mm center-to-center options if you need to match a mixed set of existing bores.

Projection is 1-3/8 inches. That is enough hand clearance for a gloved grip and it clears most inset door stops, but on a drawer that sits directly beside a wall return or an appliance panel, measure the swing path first.

Five: Matte Black, Polished Nickel, Unlacquered Brass, Satin Brass, and Vintage Brass. Unlacquered Brass is the one that will patina over time with handling, so if you are matching a fleet of units and want them all to stay identical, Satin Brass or Vintage Brass is the steadier choice.

Brass is the base material on the Avenue 211053, which is why it carries finishes like Unlacquered and Vintage Brass that develop with age rather than sitting on top of a pot metal casting.

The Avenue at 5 inch center-to-center, 6-5/8 inches overall, suits wide bank drawers, pantry doors, and appliance panels. For upper doors and narrow drawers that length looks heavy. Smaller options in the same category include the Trimco 553 Series at 3 inch center-to-center and the Trimco 562 Series in 3-1/2 inch, 4 inch and 96mm spacings, or the Deltana SBP35 square bar pull at 3-1/2 inches.

The 211053 Avenue is a traditional-style brass pull. For the same cabinet application in a contemporary line, Omnia offers the 1969, 1970 and 1971 series modern cabinet pulls, all forged solid brass, with the 1971 and 1969 at 1-3/16 inch projection and the 1970 at 1-1/4 inch. Emtek's Bar cabinet pull in the Schaub Collection is another straight-line option. Check center-to-center against your existing bores before substituting.

The Avenue 211053 measures 6-5/8 inches overall on 5 inch centers, which is long for narrow drawer fronts. For shorter runs, the Trimco 553 series drawer pulls are built at 3 inch center-to-center, and the Deltana SBP35 is a 3-1/2 inch heavy-duty solid brass square bar pull. Either keeps the drawer face proportional while still giving a full-hand grip.

The Avenue 211053 is a brass pull that mounts with 8/32 x 1 inch screws. If you want something built for harder use, the Deltana SBP35 is a heavy-duty solid brass square bar pull at 3-1/2 inch, and the Orca Hardware CK-12001 T-pull bar is a steel pull with a 2 inch bar width in satin nickel. Steel is the more abuse-tolerant of the two materials for institutional casework.

The Avenue 211053 is a pull only, so knobs have to come from elsewhere. Emtek carries the Schaub Collection in both knob and pull forms, including the Alexander and Art Deco series, and Orca's Bachelor Collection offers 1-1/4 inch round and round-ring knobs if you just need a plain companion knob in a matching tone.

Yes. Schaub publishes a Proposition 65 warning for California residents on this brass pull, linked from their product stewardship page.

Yes, and it is a common approach: pulls on drawers, knobs on doors. The 211053 Avenue is a 5 inch center-to-center pull, so it takes two bores, while a knob takes one. Single-bore options include the Orca Hardware Bachelor Collection round cabinet knob at 1-1/4 inch diameter, the Bachelor round ring knob at 1-1/4 inch diameter, and the Blackcomb Collection square knob at 25mm diameter. Confirm the knob finish matches the Avenue finish you order.