Schaub 211088 Noho Round Cabinet Pull with 6" Center to Center and Standard Mounting

Yes. The Noho 211088 is drilled on 6 inch centers, so it drops onto an existing pair of holes bored 6 inches apart with no new drilling. Overall length is 6-1/2 inches, so it only overhangs the hole centers by about a quarter inch on each end, which keeps it tight on narrower drawer faces.

It mounts with standard 8/32 machine screws, 1 inch long. That length suits a typical 3/4 inch drawer face with a little thread left over. If you're mounting through a thicker slab front, a false front, or a front with an applied panel, you'll need longer 8/32 screws, which is the same thread you'd order in any length.

Emtek carries the Schaub Collection under its SELECT program, and the Emtek 8405 Select cabinet pull is part of that collection. The Schaub 211088 Noho is a brass cabinet pull with 6 inch center to center, 6-1/2 inch overall length and 8/32 x 1 inch mounting screws, so if you go with an Emtek Schaub Collection pull you will need to confirm the center to center you order matches the 6 inch hole spacing already drilled in the door or drawer front.

The Schaub 211088 Noho is fixed at 6 inch center to center, so it will not land on a 4 inch drilling. The Omnia 1968/102 is a forged solid brass modern cabinet pull with 4 inch center to center spacing and drops straight onto existing 4 inch holes. Trimco's 562 series drawer pulls also come in 3-1/2 inch, 4 inch and 96mm center to center options if you are matching a mix of drillings across a job.

The Noho projects 1-3/8 inches off the face, so you get roughly an inch of grip space behind the bar. That matters in two places: a pull on an inside corner cabinet needs at least that much before it hits the adjacent run, and a pull on a door next to an appliance panel needs the same clearance so knuckles clear.

Five finishes: Matte Black, Polished Nickel, Unlacquered Brass, Satin Brass and Vintage Brass. Unlacquered Brass is the living finish of the group, so it will darken and patina with handling. If you're specifying a kitchen or a multi unit job and want every pull to look the same in two years, Satin Brass, Vintage Brass, Polished Nickel or Matte Black hold their appearance.

Brass is the base material on the Noho 211088, not a die cast pot metal. That is why it can be offered in an unlacquered brass version at all, and it is what holds up on drawers that get pulled dozens of times a day in a rental kitchen or a hospitality build.

At 6 inch centers and 6-1/2 inches overall, the Noho suits wide drawer banks and full height pantry or base doors. On a small upper door or a 6 inch spice pull out it will look oversized and can crowd the stile. For those openings a knob such as the Orca Bachelor round knob at 1-1/4 inch diameter, or a short pull like the Trimco 553 at 3 inch centers, is the better proportion.

The Noho is a round bar in a contemporary style. If you want the same modern look with square geometry, the Deltana SBP35 is a solid brass square bar pull at 3-1/2 inches. The Omnia 1968 series is a forged solid brass modern pull offered at 4 inch centers, and the Omnia 1970 is a forged brass modern pull with a 1-1/4 inch projection, close to the Noho's 1-3/8 inches if you're matching reveal across a mixed hardware package.

The Noho 211088 runs 6-1/2 inch overall, which is long for a narrow drawer front. For shorter runs, the Deltana SBP35 is a heavy-duty solid brass modern square bar pull at 3-1/2 inch, and the Trimco 553 series drawer pulls are 3 inch center to center. Both are square or bar profiles rather than the round Noho bar, so expect a visible difference if you mix them on the same elevation.

The Schaub 211088 Noho is built on a brass base material. If the job calls for steel, the Orca Hardware CK-12001 is a steel T-pull bar with a 2 inch bar width in satin nickel. It is a bar-style pull rather than the Noho round profile, so confirm the mounting hole spacing against your existing drilling before ordering.

The Schaub 211088 Noho stands 1-3/8 inch off the face. Among the Omnia modern forged solid brass pulls, the 1969 and 1971 each project 1-3/16 inch and the 1970 projects 1-1/4 inch. If you are working next to an appliance panel or an inside corner where knuckle clearance is tight, the Omnia options sit slightly closer to the door face.

The Noho 211088 is a contemporary round bar pull. For a period or traditional cabinet, the Emtek Art Deco cabinet pull and the Emtek Alexander cabinet pull are both part of the Schaub Collection and carry more ornamented profiles. Match the center to center to your existing drilling if you are replacing 6 inch Noho pulls.

They are close in spirit but not the same part. The Emtek Bar cabinet pull belongs to the Bar series within the Schaub Collection, while the Schaub 211088 is from the NOHO collection and ships in Matte Black, Polished Nickel, Unlacquered Brass, Satin Brass and Vintage Brass. If you are extending an existing run of Noho pulls, order the 211088 so the profile and finish call-out stay consistent.

The 211088 belongs to Schaub's NOHO collection, so it is drawn to coordinate with the rest of that line for a job where you want one length on the drawer bank and another on the doors. Order the whole package in a single finish code and mount everything with 8/32 hardware, which is what the Noho uses throughout.

Yes. Emtek lists Schaub Collection cabinet pulls, including the Emtek 8405 Select, the Alexander, the Art Deco and the Bar cabinet pull. If your spec is written around an Emtek package and you still want Schaub design, those are the parts to look at.