Schaub 211117 Noho Round Cabinet Appliance Pull with 18" Center to Center and Standard Mounting

The Noho 211117 uses 1/4-20 threaded posts with 1 inch screws. That 1 inch length suits a standard appliance panel; if you are mounting through a thicker custom panel or a doubled-up substrate, you will need longer 1/4-20 machine screws.

Back-to-back mounts two pulls through the same panel, one on each face, sharing the fasteners. It is what you use on a swinging pantry or butler door where you need a grip from both sides. The Noho 211117 is ordered either Back to Back Yes or No, in all five finishes.

Emtek sells cabinet pulls under its Schaub Collection, including the Emtek 8405 Select cabinet pulls in the Emtek SELECT series and the Emtek Bar cabinet pull. Both are catalogued with a cabinet knob/pull function, so they cover the same door and drawer duty as the Schaub 211117, which is specifically an appliance pull with 18 inch center to center and an 18-3/4 inch overall length. If the 18 inch spacing on a refrigerator or panel-front dishwasher is what you are matching, confirm the Emtek pull is offered in that long a size before substituting, since the Noho 211117 is built to appliance length.

The Schaub 211117 is an appliance pull at 18 inch center to center, which is far longer than a typical door or drawer needs. For standard cabinetry, shorter solid brass pulls in the same contemporary vocabulary include the Deltana SBP35 modern square bar pull at 3-1/2 inches, the Omnia 1968/102 with 4 inch center to center spacing, and the Trimco 553 series drawer pull at 3 inch center to center. Trimco also lists the 562 series in 3-1/2 inch, 4 inch, and 96mm center to center. Any of these covers the smaller openings while the 211117 handles the appliance fronts.

Projection is 1-7/8 inches. That is a full-hand grip, which is what you want on a heavy refrigerator or freezer panel, but check clearance against an adjacent wall, a return counter, or a door swing before committing.

Five: Matte Black, Polished Nickel, Unlacquered Brass, Satin Brass and Vintage Brass. All five are offered in both the standard and back-to-back mounting, so you can run one finish across appliance panels, doors and drawers in the Noho collection. Note that unlacquered brass is a living finish and will patina with handling, while satin and vintage brass hold their look.

Only on something wide enough. At 18-3/4 inches overall it is sized as an appliance pull, so it suits a refrigerator or dishwasher panel, a tall pantry door, or a wide bank drawer. For standard base cabinets and drawers, a short bar pull is the right call, such as the Deltana SBP35 at 3-1/2 inches or the Trimco 553 Series at 3 inch centers.

For contemporary solid brass in cabinet sizes, the Omnia 1968/102 is a forged solid brass pull at 4 inch centers, and the Omnia 1970 and 1971 are forged brass with 1-1/4 inch and 1-3/16 inch projections respectively, so they sit tighter to the face than the Noho's 1-7/8 inches. Emtek also carries the Schaub Collection under its SELECT line if you want the same design language in other sizes.

All four are contemporary solid brass pulls. The Schaub 211117 Noho is a round bar appliance pull with a 1-7/8 inch projection, 18 inch center to center and 18-3/4 inch overall, mounted with 1/4-20 x 1 inch screws. The Omnia 1969 and 1971 are forged solid brass modern pulls with a 1-3/16 inch projection, and the Omnia 1970 is forged solid brass with a 1-1/4 inch projection. The Omnia pulls sit closer to the face of the cabinet, while the Noho stands further off, which is the usual choice for a large appliance front you need to grab with a full hand.

No. The Orca Hardware Bachelor Collection CK-15030 and CK-16030 are 1-1/4 inch diameter round knobs and the Blackcomb CK-17025 is a 25mm square knob, all single-point knobs with no center to center spacing. The Schaub 211117 Noho is a two-post appliance pull drilled at 18 inch center to center with 1/4-20 x 1 inch threads, so a knob will not fill the existing bores or give you the grip length an appliance front needs. Orca's CK-12001 T-pull bar with a 2 inch bar width is a pull rather than a knob, but it is steel in satin nickel rather than brass.

The Schaub 211117 Noho is ordered with a back to back option, so it can be set up as a single-side appliance pull or as a matched pair through the panel, in Matte Black, Polished Nickel, Unlacquered Brass, Satin Brass or Vintage Brass. Among the alternatives, the Deltana SBP35 square bar pull and the Omnia 1968/102 are ordered as face-mounted cabinet pulls, so if a true through-mounted pair is what the opening calls for, staying with the 211117 back to back configuration is the direct answer.

The Schaub 211117 Noho is a contemporary round pull in brass. If the kitchen is going a more ornamental direction, Emtek's Schaub Collection includes the Art Deco cabinet pull and the Alexander cabinet pull, both catalogued as cabinet knob/pull hardware. Check the available center to center sizes against your appliance bores, since the Noho 211117 is drilled at 18 inches and most decorative door pulls are offered in shorter spacings.