Schaub 244-192 192mm Center to Center Wave Cabinet Pull

Projection is 1 inch from the face of the door or drawer. That gives roughly enough room for a gloved hand and keeps the pull from catching in a tight galley run or a pass-by island. If you need more knuckle clearance, look at a deeper-projection pull such as the Omnia 1970, which lists a 1-1/4 inch projection.

Four finishes: Satin Nickel, Polished Chrome, Matte Chrome, and Matte Black. Matte Chrome is the useful one to know about if you want a nickel-free warm-neutral look without the shine of Polished Chrome. For a multi-unit or whole-kitchen job, order all openings from the same finish code so the plating batch matches.

The Wave 244 is a contemporary-style zinc pull, which is the usual choice for volume kitchen packages where you want a consistent look across a lot of openings in one of four finishes. If you want a straight bar profile instead of the curved Wave, the Emtek Bar cabinet pull from the Schaub collection is the same design family, and Orca Hardware's CK-12001 T-pull bar is a steel bar pull in satin nickel.

No separate screw order is needed for a standard install. The pull is supplied with M4 metric screws at 1 inch length. The only time you buy screws is when your drawer fronts are thicker than standard and the 1 inch screw will not reach through, in which case any M4 machine screw in the length you need will thread into the pull.

The Schaub 244-192 is a 192 mm center-to-center pull with a 9-1/4 inch overall length, which suits wide drawers and full-height doors. For narrow drawer fronts, Trimco 553 series drawer pulls are 3 inch center-to-center, and Trimco 562 series offers 3-1/2 inch, 4 inch, and 96 mm center-to-center options. The 96 mm Trimco 562 is exactly half the Schaub drilling, which can be convenient if you are laying out a mixed run of drawer sizes.

No. Both are cabinet pulls and Emtek's Bar cabinet pull is part of the Emtek Schaub Collection, but it is a different design series from the Schaub Wave collection. The Schaub 244-192 is a contemporary Wave collection pull at 192 mm centers with a 1 inch projection. If you are matching an existing Schaub Wave run, order the Wave pull rather than a Bar, Alexander, or Art Deco series pull from the Emtek Schaub Collection.

The Schaub 244-192 is a contemporary curved Wave profile. For a squared-off modern look, the Deltana SBP35 is a modern square bar pull at 3-1/2 inch in heavy-duty solid brass, and Orca Hardware CK-12001 is a steel T-pull bar with a 2 inch bar width in satin nickel. Both are considerably shorter than the 9-1/4 inch Schaub 244-192, so plan the drilling separately.

The Schaub 244-192 Wave pull projects 1 inch off the face of the door. For more knuckle clearance, the Omnia 1969 and Omnia 1971 modern cabinet pulls are forged solid brass with a 1-3/16 inch projection, and the Omnia 1970 projects 1-1/4 inch. That extra clearance matters on doors with heavy gasketing or where gloved hands are in play.

Yes, that is the common approach: Wave pulls on the drawers, knobs on the doors. The Wave is a contemporary profile, so pair it with a plain round or square knob rather than a traditional one. Orca's Bachelor Collection round knob at 1-1/4 inch diameter and the Blackcomb square knob at 25 mm are both simple modern shapes that sit alongside it. Match plating names carefully across brands, since satin nickel varies by manufacturer.

Only with new drilling. The Schaub 244-192 is a two-hole pull on 192 mm centers using M-4 metric screws. Knobs such as the Orca Hardware Bachelor Collection round knob at 1-1/4 inch diameter, the Bachelor round ring knob at 1-1/4 inch, or the Blackcomb Collection square knob at 25 mm all mount on a single center hole. Knobs are often used on upper doors with long pulls like the 244-192 on lower drawers within the same kitchen.