Schaub 318 12-5/8" Center to Center Positano Clear Cabinet Pull

It takes M4 metric machine screws, not the 8-32 standard screws most US cabinet pulls use. If you are mixing this into a kitchen that already has 8-32 hardware, keep the metric screws that come with the pull separate so an installer does not grab the wrong box.

The Schaub 318 Positano is a contemporary-style cabinet pull with a zinc base material and a 1 inch projection. If you want a forged solid brass body instead, the Omnia 1970 is a modern cabinet pull in forged solid brass with a 1-1/4 inch projection, and the Omnia 1969 and Omnia 1971 are forged solid brass modern pulls with a 1-3/16 inch projection. All three sit slightly further off the door face than the Positano, so allow for the added knuckle clearance if the cabinet is in a tight walkway.

The Schaub 318 Positano is a long appliance-scale pull at 13 inches overall on 320 mm center-to-center spacing, so it overhangs a narrow drawer front. For short centers, the Trimco 553 Series drawer pulls are 3 inch center-to-center, the Trimco 562 Series offers 3-1/2 inch, 4 inch and 96 mm center-to-center options, and the Deltana SBP35 is a 3-1/2 inch square bar pull in solid brass. The Omnia 1968/102 is a modern forged solid brass pull on 4 inch centers if you want to stay with a forged brass body across the run.

Projection is 1 inch, with a 1/2 inch base dimension where the posts meet the door. That 1 inch of clearance is enough for a gloved hand and keeps knuckles off the face, and it matters in a galley run or next to a wall return where a deeper pull would get clipped by a passing door.

Six combinations, pairing a metal finish with a clear or smoke insert: Satin Nickel with Clear or Smoke, Polished Chrome with Clear or Smoke, and Signature Satin Brass with Clear or Smoke. Clear reads brighter and nearly disappears against light cabinetry; smoke gives a darker, tinted bar that shows up against white or pale doors.

The body is zinc, a cast base metal used widely in decorative cabinet hardware. It is a decorative appliance-scale pull rather than a forged solid brass bar. If you are specifying for heavy commercial traffic or a high-abuse multi-family turn, a forged solid brass pull such as the Omnia 1968 or 1969 series is the heavier-duty construction; if the look is what drives the job, the zinc Positano with its glass insert is the design piece.

The Positano is a contemporary pull with a clear or smoke insert running its length. For a straight metal bar in the same modern vocabulary, look at the Deltana SBP series square bar pull in solid brass, the Emtek Bar cabinet pull from the Schaub collection, or the Orca Hardware CK-12001 T-pull bar in steel with a satin nickel finish. Those have no insert and are simpler to match across a large multi-unit order.

Yes, for small doors where a 13 inch pull will not fit, knobs are the usual companion to a long pull. The Orca Hardware Bachelor Collection CK-15030 is a round cabinet knob 1-1/4 inch in diameter, the CK-16030 is a round ring cabinet knob at the same 1-1/4 inch diameter, and the Blackcomb CK-17025 is a square cabinet knob at 25 mm diameter. The square Blackcomb reads closest to the contemporary line of the Positano, while the two Bachelor knobs are round.

They are not interchangeable. The Schaub 318 Positano is a contemporary cabinet pull with a zinc base, 320 mm center-to-center and M-4 metric screws. The Orca Hardware CK-12001 is a T-pull bar with a 2 inch bar width, built in steel with a satin nickel finish, so it is a different profile and a different material. If the finish match matters, the Positano is offered in satin nickel with clear or smoke accents, which reads closer to a nickel-finish run than a steel T-bar does.

Positano is a Schaub collection, so the coordinating pieces come from the same family in the same finishes. Schaub hardware is also sold through the Emtek SELECT and Schaub collection lines, where you will find Alexander, Art Deco, and Bar cabinet knobs and pulls if you want a deliberate mix rather than an exact match. For plain round or square knobs to pair with a modern run, the Orca Bachelor collection 1-1/4 inch round knob and Blackcomb 25 mm square knob are simple companions.

Its listed function is cabinet pull, and at 320 mm center to center it is sized for the largest openings in a kitchen: appliance panels, pantry and tall doors, and wide drawers. Trimco 553 and 562 series drawer pulls, at 3 inch and 3-1/2 inch to 4 inch center to center, are what you would use on small utility drawers by comparison.