Schaub 324 5-1/16" Center to Center Positano Arch Clear Cabinet Edge Pull

Yes. The Positano 324 is drilled on 128 mm centers, which is 5-1/16 inches, so it drops onto existing 128 mm bored doors and drawer fronts without new holes. Overall length is 6-1/4 inches, so it covers a bit more face than the hole spacing alone.

It uses M4 metric screws at 1 inch long. That is the metric thread, not the 8-32 standard most domestic cabinet pulls use, so don't plan on reusing the screws out of an old American pull. On a thicker front or one with an applied panel, a 1 inch screw may not reach through, so you'd need longer M4 machine screws.

The Positano 324 is 128 mm centers only. For 4 inch centers, the Omnia 1968/102 is a forged solid brass modern pull at that spacing. For 3-1/2 inch, the Deltana SBP35 square bar pull or the Trimco 562 Series drawer pull will cover it; the Trimco 562 also runs in 4 inch and 96 mm. For 3 inch centers, the Trimco 553 Series.

The Schaub 324 Positano is a zinc-base cabinet pull with a 1-3/4 inch projection. If the specification calls for forged solid brass, the Omnia 1968/102 modern cabinet pull is forged solid brass with 4 inch center-to-center spacing, and the Omnia 1970 is forged solid brass with a 1-1/4 inch projection. Note the Positano's 128 mm center-to-center will not line up with the Omnia 1968/102's 4 inch hole spacing, so drawer fronts drilled for one will need new boring for the other.

No, those are not interchangeable. The Positano 324 is a two-hole edge pull bored at 128 mm center-to-center. The Orca Hardware Bachelor Collection CK-15030 and CK-16030 are round cabinet knobs at 1-1/4 inch diameter, and the Blackcomb CK-17025 is a 25 mm square cabinet knob - all single-hole knobs. Swapping to a knob leaves the second bore hole exposed unless the drawer fronts are new or refaced.

The Positano 324 is a decorative contemporary edge pull with a zinc base and an acrylic clear or smoke insert paired with satin nickel, polished chrome or signature satin brass. For high-traffic commercial casework where a plainer, more robust bar is preferred, the Deltana SBP35 modern square bar pull is a heavy-duty solid brass pull at 3-1/2 inch, and Trimco offers the 553 series drawer pull at 3 inch center-to-center and the 562 series in 3-1/2 inch, 4 inch and 96 mm center-to-center. None of those match the 128 mm bore of the Positano 324, so plan the drilling accordingly.

Projection is 1-3/4 inches. That is a fairly deep reach for a cabinet pull, which is a plus for gloved hands or accessible-design kitchens, but worth checking in a tight galley or next to an adjacent appliance door that swings past it.

Six combinations, pairing a metal finish with a clear or smoke acrylic element: Satin Nickel with Clear or Smoke, Polished Chrome with Clear or Smoke, and Signature Satin Brass with Clear or Smoke. The Clear reads bright and disappears against light fronts; the Smoke is a tinted grey that stands out more on white or pale cabinetry.

Despite the edge pull function label, the 324 mounts through two bored holes on 128 mm centers and stands 1-3/4 inches off the face, so it is installed on the front of the door or drawer like any two-post pull. The arch profile and the clear or smoke element are what give it the light, edge-like look.

The Positano 324 projects 1-3/4 inch off the face, which is what gives the arch its grip depth. For less stand-off in a narrow aisle, the Omnia 1969 and Omnia 1971 modern cabinet pulls are both listed at a 1-3/16 inch projection, and the Omnia 1970 at 1-1/4 inch, all in forged solid brass. Confirm the hole spacing you need on the Omnia series separately, since the Positano 324 is drilled at 128 mm center-to-center.

The Positano 324 belongs to Schaub's Positano collection in a contemporary style. Emtek carries the Schaub collection under its own part numbers, including the Emtek 8405 Select cabinet pulls, the Emtek Alexander cabinet pull, the Emtek Art Deco cabinet pull, and the Emtek Bar cabinet pull - each a different series within that Schaub collection, so you can change the bar or arch profile while staying in the same design family. Verify center-to-center on the Emtek series against the 128 mm bore used by the Positano 324.

They serve the same purpose but are different hardware. The Orca Hardware CK-12001 is a T-pull bar with a 2 inch bar width in steel with a satin nickel finish. The Schaub Positano 324 is a zinc-base arch edge pull with a 6-1/4 inch overall length, 1-3/4 inch projection and M4 metric x 1 inch mounting screws. Check the screw thread and hole spacing before treating the Orca as a swap, since the Positano is bored at 128 mm center-to-center.

Yes, and it is a common approach in a Positano kitchen: arch pulls on drawers, knobs on doors. Positano is a contemporary style, so pair it with a plain round or square knob rather than a traditional one. The Orca Bachelor Collection round knob at 1-1/4 inch diameter or the Blackcomb square knob at 25 mm both read contemporary and are easy matches in satin nickel.

Yes, Schaub publishes a Proposition 65 warning for this product, linked through their product stewardship page. Relevant if you are specifying for a California project and have to pass that disclosure along.