Schaub 428 8" Center to Center Fonce Bar Cabinet Pull

Yes, the Schaub 428 Fonce bar pull is drilled at 8 inches center to center, so it drops onto existing 8 inch holes. Overall length is 10 inches, meaning about an inch of bar past each screw hole, so allow for that near the edge of a drawer face or the stile of a door.

The Fonce 428 uses 8/32 machine screws at 1 inch length. That covers a standard 3/4 inch drawer front with thread to spare. If you are mounting through a thicker front, a false front, or a front plus a thick applied panel, you will need longer 8/32 screws.

The Emtek Bar Cabinet Pull in the Schaub Collection is the nearest bar-style counterpart. Like the Schaub 428, it is a bar pull carried under the Schaub name, and Emtek lists it as a cabinet knob/pull in its Bar series. The Schaub 428 itself is an 8 inch center-to-center bar pull with a 1-1/4 inch projection and a 7/8 inch base, so confirm the Emtek bar length you order matches the 8 inch hole spacing already drilled in the door or drawer front.

For narrow drawer fronts, look at the Trimco 562 series drawer pulls, offered in 3-1/2 inch, 4 inch and 96mm center-to-center, or the Trimco 553 series at 3 inch center-to-center. The Deltana SBP35 is another short option, a modern square bar pull at 3-1/2 inch in solid brass. Any of these drills a much tighter hole pattern than the Schaub 428, which is fixed at 8 inch center-to-center with a 10 inch overall length.

The Omnia 1968/102 is a modern forged solid brass cabinet pull with 4 inch center-to-center spacing, so it lands on an existing 4 inch hole pattern. The Trimco 562 series also lists a 4 inch center-to-center option. The Schaub 428 requires 8 inch center-to-center holes, so using it on a 4 inch pattern means new boring in the door or drawer front.

Projection is 1-1/4 inches, with a 7/8 inch base dimension where it meets the face. That 1-1/4 inches is enough grip clearance for a gloved hand and is the number to check against a drawer that opens next to a wall return or an adjacent appliance handle.

Five: Matte Black, Polished Nickel, Satin Brass, and two two-tone combinations, Matte Black with Polished Nickel and Matte Black with Satin Brass. The two-tone options are the reason people pick the Fonce line, since they let the bar and the posts read differently against the cabinet.

The Fonce 428 is the 8 inch center to center size in the collection, so for shorter runs you stay within Fonce and order the smaller center spacings in the same finish rather than mixing brands. Keeping to one collection and one finish code is how you keep the bar diameter and the post base, 7/8 inch here, consistent across doors and drawers.

The Omnia 1970 modern cabinet pull is forged solid brass with a 1-1/4 inch projection, matching the 1-1/4 inch projection of the Schaub 428 Fonce bar pull, so the hand clearance off the face of the door is the same. Omnia 1969 and 1971 are the adjacent modern pulls in forged solid brass at 1-3/16 inch projection if you want slightly tighter clearance in a tight aisle or next to an appliance panel.

No - a knob mounts on a single screw hole and the Schaub 428 is a two-post bar pull on 8 inch center-to-center spacing with 8/32 x 1 screws, so the door is drilled differently. Knob options such as the Orca Hardware Bachelor Collection round knob at 1-1/4 inch diameter, the Bachelor round ring knob at 1-1/4 inch diameter, or the Blackcomb square knob at 25mm are single-hole cabinet knobs. They are a common pairing on upper doors when the 428 bar pull runs on drawers, but they are not a drop-in replacement for it.

The Orca Hardware CK-12001 T-pull bar is a steel pull with a 2 inch bar width in satin nickel, a heavier section than the 7/8 inch base of the Schaub 428. The Deltana SBP35 is described as a heavy-duty solid brass square bar pull at 3-1/2 inch center-to-center for shorter applications. Choose based on the hole spacing already in the door - the 428 is fixed at 8 inch center-to-center.

Fonce is a contemporary bar pull, a straight round bar on two posts. It mixes with flat panel and slab doors and with shaker fronts where you want a clean horizontal line. If you want a period look instead, Emtek's Schaub Collection includes an Art Deco cabinet pull and the Alexander series.