Schaub 5112A 12" Center to Center Pub House Appliance Pull

It takes 1/4 inch threaded studs, not the 8-32 machine screws used on standard cabinet pulls. That is normal for appliance pulls, which carry the weight of a refrigerator or freezer panel door. If you are swapping out a lighter pull that used 8-32, the existing holes will need to be opened up for the 1/4 inch hardware.

The 5112A is built as an appliance pull, in solid brass with 1/4 inch mounting studs, so it is intended for panel-ready refrigerator and freezer doors rather than drawer fronts. A standard cabinet pull at 8-32 screws should not be substituted on an appliance door, where the pull takes the full pull-open load.

The Schaub 5112A is built for appliance fronts at 12 inch center to center with a 13-1/4 inch overall length, so it will not land on cabinet drawer holes bored at 3 or 4 inches. For those, the Trimco 553 Series drawer pull is made at 3 inch center to center, and the Trimco 562 Series is offered in 3-1/2 inch, 4 inch, and 96mm center to center. The Omnia 1968/102 modern cabinet pull is a forged solid brass option at 4 inch center to center. Any of those three cover standard cabinet and drawer boring; the 5112A covers the refrigerator or range panel.

The Schaub 5112A projects 2 inches off the face. If clearance is the constraint, Omnia's forged solid brass modern pulls sit closer to the door: the 1969 and 1971 are both built at 1-3/16 inch projection and the 1970 at 1-1/4 inch. All three keep the solid brass construction you get with the 5112A, just with less stand-off, though they are cabinet pulls rather than appliance-length hardware.

Projection is 2 inches from the face of the panel to the back of the grip, with a 3/4 inch base footprint at the posts. That 2 inch clearance gives room for a gloved hand, and it is worth checking against adjacent walls or a return cabinet so the appliance door can still swing fully open.

Five: Polished Chrome, Brushed Nickel, Matte Black, Polished Nickel, and Signature Satin Brass. All five are on solid brass, so the finish is applied over a brass body rather than plated zinc.

Emtek carries the Schaub Collection directly, so you can stay in the same design family without switching manufacturers. The Emtek 8405 Select cabinet pulls, the Emtek Alexander cabinet pull, the Emtek Art Deco cabinet pull, and the Emtek Bar cabinet pull are all catalogued as Schaub Collection cabinet knob/pull items. The Schaub 5112A itself is the Pub House collection in a contemporary style, solid brass, with a 2 inch projection, so the Emtek Bar pull is the closest in spirit if you want a straight bar profile.

They are different specifications. The Orca Hardware CK-12001 is a T-pull bar with a 2 inch bar width, built in steel and finished satin nickel. The Schaub 5112A is solid brass with a 2 inch projection and is set up as an appliance pull at 12 inch center to center with a 1/4 inch thread screw size. If you are matching solid brass hardware elsewhere in the kitchen or need the 12 inch appliance spacing, the CK-12001 is not the same part; if steel and a single satin nickel finish suit the job, it is a workable bar pull.

The Deltana SBP35 is a modern square bar pull at 3-1/2 inches, described as heavy-duty solid brass. The Schaub 5112A shares the solid brass base material but is an appliance pull at 12 inch center to center with a 13-1/4 inch overall length and a 3/4 inch base dimension. The SBP35 is the square-profile choice for a short cabinet or drawer run; the 5112A is the long grab bar for a panel-front refrigerator or range.

Pub House is catalogued as a contemporary style, so it reads clean and modern rather than period. In Matte Black or Signature Satin Brass it suits a transitional kitchen; Polished Chrome and Brushed Nickel keep it strictly modern.

Yes, and that is a common split. The Schaub 5112A handles the appliance fronts at 12 inch center to center in solid brass, available in Polished Chrome, Brushed Nickel, Matte Black, Polished Nickel, and Signature Satin Brass. For the door and drawer knobs, Orca's Bachelor Collection offers the CK-15030 round cabinet knob and CK-16030 round ring knob, both 1-1/4 inch diameter, and the Blackcomb CK-17025 square knob at 25mm diameter. Knobs need only a single bore, so they avoid any center-to-center matching across differing cabinet runs.