You may also like
Schlage ALX Series Lever Pack Kit, Button
Manufacturer Resources
ALX Series catalog
Product Specs
- Subcategory:
- Cylindrical Lever Locks
- Series:
- ALX Series
- Grade:
- Grade 2
- Duty Level:
- Medium Duty
- Handle Type:
- Lever
- Keyed Function:
- Non-Keyed
- Warranty:
- 10 Year
- Product Group:
- Mechanical Locks
- Product Subgroup:
- Leversets
- Product Type:
- Lock Trim
- Keyed:
- No
- Electronic:
- No
- Commercial/Residential:
- Commercial
- Lock Type:
- Cylindrical
- Segment:
- Door Hardware
- Door Hand Direction:
- Field Reversible
- Product Substrate:
- Zinc and Steel
- Product Category:
- Mechanical Locks
- Department:
- Door Hardware
Schlage LP BT 626 SAT – Frequently Asked Questions
1) Is the Schlage ALX lever kit a complete lockset or just the trim?
It's trim, not a lock. The ALX Series single lever kit with button supplies one lever and the button (push-button) trim piece for a cylindrical ALX lock, so you're replacing or specifying the lever and outside trim rather than buying a whole chassis. If your existing lock body is worn or you're doing new construction, you need a complete ALX cylindrical lockset instead.
2) Do I have to order a left-hand or right-hand Schlage ALX lever kit?
No handing to specify. The ALX lever kit is field reversible, so the same part covers a left- or right-hand door and you set the hand during install. That matters if you're stocking spares for a building with doors swinging both ways, one part number covers the lot.
3) Is the Schlage ALX button lever keyed, and what function does the button give me?
Non-keyed. The ALX button lever kit has no cylinder and takes no key, the button is the locking control, which is the privacy/patio style arrangement used on restrooms, offices and bedrooms rather than on an entry that needs key control. If you need key access on that opening, you want a keyed ALX function, not this kit.
4) Is the Schlage ALX lever kit rated for commercial use or is it a residential lever?
Commercial, ANSI/BHMA Grade 2, medium duty. That's the right band for offices, multi-family interiors, back-of-house and light-traffic institutional doors. For a main entrance, a stairwell, or any high-cycle opening in a school or hospital, step up to a Grade 1 cylindrical lock instead, Grade 2 medium duty will wear out early there.
5) Which lever styles and finishes does the Schlage ALX single lever kit come in?
Ten lever designs, Athens (ATH), Boardwalk (BRK), Broadway (BRW), Latitude (LAT), Longitude (LON), Omega (OME), Rhodes (RHO), Saturn (SAT), Sparta (SPA) and Tubular (TLR), in nine finishes: 605 bright brass, 606 satin brass, 612 satin bronze, 613 oil rubbed bronze, 619 satin nickel, 622 matte black, 625 bright chrome, 626 satin chrome and 643E aged bronze. If you're matching existing openings in a building, the lever design and finish code stamped on what's already hung is what you order to.
6) I need a dormitory function latch instead of a push-button lever, what else do you carry?
The button ALX kit is a non-keyed lever trim, so it won't give you dormitory function. For that, the Cal-Royal CALDOR238 CAL101 dormitory dead latch is a dormitory-function option we stock. Pick by how the door has to behave: dormitory locks the outside behind you, the ALX button is simple occupant-controlled privacy.
7) Can a Cal-Royal CALDOR238 dormitory dead latch be swapped in for a Schlage ALX lever kit?
They are not interchangeable parts. The Cal-Royal CALDOR238 CAL101 is a dormitory dead latch, a latching unit with the dormitory function. The Schlage ALX Series single lever kit with button is lock trim - the lever side of a cylindrical lock, field reversible and non-keyed, in Grade 2 for medium duty commercial use. Order the ALX lever kit when the lever trim is what is being replaced, and the dormitory dead latch when the latch and its function are what the opening needs.
8) What is the Schlage ALX lever made of, and will it hold up in a corridor?
Zinc and steel construction, carrying a Grade 2 medium duty rating. That's built for normal interior commercial traffic, tenant suites, offices, restrooms. It is not the spec for an exterior opening or a high-abuse corridor where a Grade 1 lock belongs.
9) Is there a wiring or power connection on the Schlage ALX button lever kit?
Purely mechanical, no electrification. The ALX lever kit is not an electronic product, so there's no wire, no transfer hinge and no power supply to coordinate. Access-controlled openings need an electrified lock, not this trim.
10) Where can I get the full Schlage ALX Series specs and function chart?
Schlage publishes the ALX Series catalog, with the full function list, lever designs and trim options, at https://zensupply.com/content/pdf/schlage/Schlage_ALX_Series_Catalog_113231.pdf. Useful when you're matching an existing ALX function code on a door and need to confirm which lever kit corresponds to it.
How fast can I get the Schlage LP BT 626 SAT delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Schlage LP BT 626 SAT come with a warranty?
Absolutely. The Schlage LP BT 626 SAT is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Schlage LP BT 626 SAT?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Schlage LP BT 626 SAT from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.