Schlage Electronics AD/CO Seri...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$1,139.00
$808.99
Schlage Electronic AD/CO Series Multi Tech Reader Module, 125kHz Proximity Reader Module, 13.56MHz Smart Card Reader Module

Schlage Electronics AD/CO Series Multi Tech Reader Module, 125kHz Proximity Reader Module, 13.56MHz Smart Card Reader Module

(No reviews yet) Write a Review

Model: MT GRY 626
Selected Finish is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$1,139.00
$808.99
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Schlage multi-technology readers are designed to simplify access control solutions. They recognize magnetic stripe, proximity, Schlage smart card and NFC-enabled smart devices, ensuring a seamless transition to high-security smart technology in the future. They use an open architecture platform designed to work with industry standards and common access control system interfaces. The readers all fit a variety of placement needs, and include a modern design to complement any facility and its hardware.

Manufacturer Resources

Product Specs

Product Group:
Parts and Accessories
Product Subgroup:
Parts and Accessories
Product Type:
Reader Modules
Subcategory:
Parts and Accessories
Parts and Accessories Type:
Replacement Parts
Product Attribute:
Parts and Accessories
Product Function:
Readers
Product Category:
Electronic Access Control
Department:
Door Hardware

Schlage Electronics MT GRY 626 – Frequently Asked Questions

1) Will a Schlage AD Series multi-technology reader module read both 125kHz proximity cards and 13.56MHz smart cards?
Both, from one module. The AD/CO Series multi-tech reader module handles 125kHz proximity credentials and 13.56MHz smart cards, and it also reads magnetic stripe, Schlage smart cards, and NFC-enabled phones. That matters if you're mid-migration: a facility still carrying legacy prox badges can issue smart credentials to new tenants or staff without swapping readers again when the old cards retire.
2) Can I swap the credential reader on a Schlage AD Series lock without replacing the whole lock?
Yes. The multi-tech reader is supplied as a replacement reader module for AD and CO Series electronic locks, so a site running keypad-only or older prox openings can upgrade the credential technology at the door and keep the existing chassis, trim, and door prep. For a property manager standardizing a building, that's a per-door parts order rather than a rehang.
3) Will Schlage multi-technology readers work with my existing access control panel, or do I need Schlage head-end software?
They run on an open architecture platform built to work with industry standards and common access control system interfaces, so they are not locked to a single head end. If you're an integrator quoting a mixed site, that is the point of the multi-tech module: it reads the credentials you already issue and talks to the panel infrastructure you already have.
4) Should I use a multi-tech reader or a proximity-only reader for a building still on 125kHz badges?
Go multi-tech if any part of the credential base is going to change. A 125kHz-only reader is fine for a static badge population, but the multi-tech module reads 125kHz prox and 13.56MHz smart cards plus NFC phones at the same time, which lets you run legacy and new credentials in parallel during a rollout instead of cutting every cardholder over on one date. Prox-only means a second hardware pass when the smart card decision arrives.
5) Do Schlage AD Series multi-tech readers support mobile credentials on a phone?
NFC-enabled smart devices are among the credentials these readers recognize, alongside magnetic stripe, proximity, and Schlage smart cards. For student housing, hospitality, or multi-family where residents would rather carry a phone than a fob, that removes the reader as the blocker.
6) What colors does the Schlage AD/CO Series reader module come in?
Two finishes, brown and gray. That is the choice to make when you're matching the module to the lock chassis already hanging on the other doors, since the reader module is a replacement part that drops into the existing AD or CO Series unit rather than a standalone wall reader.
How fast can I get the Schlage Electronics MT GRY 626 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Schlage Electronics MT GRY 626 come with a warranty?
Absolutely. The Schlage Electronics MT GRY 626 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Schlage Electronics MT GRY 626?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Schlage Electronics MT GRY 626 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!