Schlage KP626 Keypad Only Reader Module for AD Series Lock

No. The KP626 is a keypad-only reader module, so credentials are entered as a PIN at the keypad. There is no card, fob, or smart credential reader in this module. If you need card or multi-technology credentials on the opening, you need a reader module built for that credential type instead.

It is a replacement part, not a complete lockset. The KP626 is the keypad reader module with the exterior escutcheon, intended to be fitted to an existing Schlage electronic lock. The chassis, latch, interior trim, and electronics of the lock itself are separate and are not supplied with the module.

The KP626 module is supplied as an exterior escutcheon in the cylindrical configuration, so it goes on a cylindrical lock chassis. A mortise or mortise deadbolt lock body takes a different escutcheon module, so a cylindrical part will not mount to it.

Going keypad-only means access is granted by PIN code, so there are no cards or fobs to issue, replace, or collect at move-out. That suits openings where you want low credential overhead, such as common doors and service rooms. The trade-off is that PINs get shared and have to be rotated, so higher-security or audited openings are usually better served by a card or multi-technology reader module on the same electronic access control platform.