Schlage Electronics 653-1414 K...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$663.00
$561.45
Schlage Electronics 653-1414 Keyswitch, DPDT- Clockwise/Counter Clockwise Maintained/Maintained

Schlage Electronics 653-1414 Keyswitch, DPDT- Clockwise/Counter Clockwise Maintained/Maintained

(No reviews yet) Write a Review

Model: 653-1414 CYL
Selected Finish is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$663.00
$561.45
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Overview


Schlage 650 Series keyswitches utilize an innovative magnetic spring design which allows installers to configure both clockwise and counterclockwise key turn direction as well as momentary or maintained action in seconds. Single gang and narrow stiles are available with numerous options which include heavy-duty plate, weather resistant cover (single gang size only), 2 LED lights – green/red, anti-tamper switch and Schlage Everest cylinder. in addition to the standard (630) satin stainless steel finish, there are three additional architectural finishes to choose from.

 

Features and benefits

  • Easy to install and maintain
  • Single gang and narrow stile offer ultimate flexibility
  • Patented magnetic spring design allows installers to configure momentary to maintained action in seconds
  • UL 294 Listed

Standard keyswitch

  • 5 amp @ 30 VDC
  • SPDT contacts

Manufacturer Resources

Product Specs

Product Group:
Electronic Access Controls
Product Subgroup:
Sensors, Switches, Relays and Timers
Features:
Easy to Install and Maintain; Single Gang and Narrow Stile Offer Ultimate Flexibility; Patented Magnetic Spring Design Allows Installers to Configure Momentary to Maintained Action in Seconds
Included Components:
Heavy-Duty Plate; Weather Resistant Cover; (2) LED Lights Green/Red; Anti-Tamper Switch; Schlage Everest Cylinder
Product Type:
Keyswitch
Installation Category:
Single Gang
Department:
Door Hardware

Schlage Electronics 653-1414 CYL – Frequently Asked Questions

1) Will the Schlage 653-1414 keyswitch work if my key turn direction is counterclockwise?
Either direction works. The 650 Series magnetic spring design lets the installer set clockwise or counterclockwise key turn in the field, and the 653-1414 is the DPDT clockwise/counterclockwise maintained/maintained configuration. You don't order a handed version, you set it at install.
2) Can I change a Schlage 650 Series keyswitch from maintained to momentary action after it's installed?
Yes. The patented magnetic spring design lets an installer swap between momentary and maintained action in seconds, without a different part number. That matters if the switch is feeding a door operator that wants a momentary pulse rather than a held contact, and you found out after the plate was already on the wall.
3) Does the Schlage 653 keyswitch mount in a standard single gang box or on a narrow stile door?
Both are covered. The standard build is single gang, and a narrow stile version is offered with a stainless steel plate measuring 1-3/4 x 4-1/2 inches for aluminum stile frames and mullions that won't take a gang plate.
4) Can I use a Schlage 650 keyswitch outdoors or on an exterior door?
There's a water resistant cover option, but read the restriction before you spec it: it fits a 1-1/8 inch cylinder only and is not available with the narrow stile plate, the L2 option, or special finishes. So an exterior narrow stile aluminum door cannot take both the narrow stile plate and the weather cover on the same switch.
5) Does the Schlage 653 keyswitch come with a cylinder, or do I have to supply one?
The cylinder is an ordering choice, not automatic. You can order it with a 1-1/4 inch Schlage Everest mortise cylinder including two keys and a 1/8 inch spacer ring, or the same cylinder keyed alike. If your building is already on an existing keyway and you want the switch on the facility master, order the switch without and have your locksmith fit the house cylinder.
6) What is the difference between the Schlage 653-1414 keyswitch and the BEA 10JAMBSWITCHMOM keyswitch plate?
The Schlage 653-1414 is a DPDT keyswitch built on the 650 Series magnetic spring design, which lets the installer set clockwise or counterclockwise key turn and switch between momentary and maintained action in seconds without swapping parts. The BEA 10JAMBSWITCHMOM is an access control keyswitch plate with momentary operation, so its action is fixed as momentary. If the opening needs a key turn that holds the door in an unlocked state until turned back, the 653-1414 covers that mode; if every switch on the job is a press-and-release release signal, the 10JAMBSWITCHMOM answers that one function.
7) I need a maintained-action keyswitch for a jamb that also has to take a push plate. What are my options?
The BEA 10COMBOPLATE is a jamb push plate and maintained keyswitch on a double gang access control switch plate, so the push actuator and the maintained keyswitch share one plate. The Schlage 653-1414 is a single gang keyswitch, and its magnetic spring design allows configuring momentary or maintained action, but it is a keyswitch alone rather than a combined push plate assembly. When the drawing calls for both a push actuator and a keyed override at the same jamb location, the combo plate consolidates them; when the keyed control is separate from the push, the 653-1414 fits the single gang opening.
8) Will a BEA jamb keyswitch plate work where a narrow stile is the mounting surface?
The BEA 10JAMBSWITCHMOM and 10JAMBSWITCHONF are jamb-mounted keyswitch plates, and the 10COMBOPLATE and 10COMBOPLATEMOM are double gang combo plates, which is a wider footprint. The Schlage 653-1414 is offered in a narrow stile version with a 1-3/4 inch by 4-1/2 inch stainless steel plate, alongside the single gang configuration. On an aluminum storefront where the available flat is only a stile face, the narrow stile 653-1414 is the one sized for that surface.
9) I want a keyswitch that uses my existing Schlage keyway. Do the BEA jamb switches take a Schlage cylinder?
The Schlage 653-1414 can be ordered with a 1-1/4 inch Schlage Everest mortise cylinder with two keys and a 1/8 inch spacer ring, and a keyed alike version of the same cylinder for a facility running one key across multiple switches. The BEA 10JAMBSWITCHMOM and 10JAMBSWITCHONF are keyswitch plates supplied as their own assemblies rather than around a Schlage Everest cylinder. Where the property is already keyed to Schlage Everest and the keyswitch has to fall onto that key system, the 653-1414 with the Everest cylinder option is the direct fit.
10) For an exterior door exposed to weather, which keyswitch should I specify?
The Schlage 653-1414 offers a water resistant cover that fits a 1-1/8 inch cylinder only and is not available with the narrow stile, L2 or special finish configurations, and the switch is UL 294 Listed. The BEA 10JAMBSWITCHONF brings a tamper-resistant design and the 10JAMBSWITCHMOM a momentary keyswitch plate, both as jamb-mounted plates. If the driver on the opening is water exposure, the 653-1414 with the water resistant cover is the configuration built for it, keeping in mind the cover rules out the narrow stile plate on that same device.
11) Can a BEA combo plate replace a Schlage 653 keyswitch one for one?
Not as a direct swap. The BEA 10COMBOPLATE and 10COMBOPLATEMOM are double gang plates combining a jamb push plate with a keyswitch, so they need a double gang opening and they add a push actuator. The Schlage 653-1414 is a single gang keyswitch. Replacing a 653-1414 with a combo plate means enlarging the box and re-terminating for the added push function; replacing it with the BEA 10JAMBSWITCHMOM or 10JAMBSWITCHONF keeps the device to a keyswitch plate, though those are fixed in their operation while the 653-1414 is field configurable between momentary and maintained.
12) What amperage and voltage can a Schlage 650 Series keyswitch switch?
The standard keyswitch is rated 5 amps at 30 VDC with SPDT contacts. The 653-1414 is the DPDT version, which gives you a second set of contacts for switching two circuits off one key turn, such as releasing a mag lock and signalling an operator or an alarm shunt at the same time.
13) I need several key switches across a building to open on one key. Can I get them keyed alike?
Yes. There's a keyed alike option supplying the 1-1/4 inch Schlage Everest mortise cylinder with two keys and a 1/8 inch spacer ring, so a maintenance staff carries one key for every switch instead of a ring per door. Order every switch in the group on the keyed alike option at the same time so they land on the same key.
14) Is the Schlage 650 Series keyswitch UL listed for access control?
UL 294 Listed, which is the access control system units standard that most spec writers call out for a keyswitch releasing a locking device.
15) Can I get an indicator light on the Schlage 653 keyswitch to show whether the door is unlocked?
Yes, as an ordered option: two LEDs, red and green, running on dual voltage 12/24 VDC. On a maintained switch like the 653-1414 that's worth having, since the switch stays in whichever position it was left and the LED is the only way someone sees the door was left released.
16) Should I use a keyswitch or a push plate to release my door, and can I get both?
A keyswitch restricts operation to whoever carries the key, which is what you want for after-hours release or an override on a locked entry. A push plate is open to anyone and suits an accessible entrance during business hours. If the opening needs both on one jamb, BEA makes double gang combo plates that pair a jamb push plate with a keyswitch: the 10COMBOPLATE with a maintained keyswitch, or the 10COMBOPLATEMOM with a momentary one.
17) What's an alternative to the Schlage 653 keyswitch if I only need momentary operation on a jamb?
The BEA 10JAMBSWITCHMOM is an access control keyswitch plate built for momentary operation, and the 10JAMBSWITCHONF is a jamb keyswitch plate with a tamper-resistant design. Those are fixed-function jamb plates. The Schlage 650 route is different in kind: one switch that the installer sets to momentary or maintained, and clockwise or counterclockwise, on site. If you are standardizing across a building and don't yet know which openings need which action, that field configurability is the reason to go Schlage.
18) What is the difference between the BEA 10COMBOPLATE and the 10COMBOPLATEMOM?
Both are BEA double gang jamb combination plates pairing a push plate with a keyswitch. The 10COMBOPLATE carries a maintained keyswitch, so the key turn holds its state; the 10COMBOPLATEMOM carries a momentary keyswitch, so the key turn sends a pulse and returns. Choosing between them means committing to one action at order time. The Schlage 653-1414 takes a different approach with its magnetic spring design, which lets the installer configure momentary or maintained action in seconds after the switch is on site.
19) Is there a tamper-resistant keyswitch plate alternative to the Schlage 653-1414?
The BEA 10JAMBSWITCHONF is an access control keyswitch plate with a tamper-resistant design, and it is a fixed keyswitch plate. The Schlage 653-1414 addresses tamper from the switch side instead: an anti-tamper switch is among its options, and it can be ordered in the 630 satin stainless steel finish with that anti-tamper switch fitted. For a facility standardizing on one keyed control across exterior openings, the 653-1414 also offers a weather resistant cover and a Schlage Everest cylinder, while the 10JAMBSWITCHONF is a single plate solution built around its tamper-resistant construction.
20) Which keyswitch gives visual confirmation of the door state at the switch?
The Schlage 653-1414 is available with two LEDs in red and green running on dual voltage 12/24 VDC, so the person at the switch sees the state without watching the door. The BEA 10JAMBSWITCHMOM and 10COMBOPLATEMOM are momentary devices whose names describe the switching action only. On a loading dock or a stairwell door where the operator cannot see the latch from the switch location, the LED option on the 653-1414 is the feature that covers it.
21) If I only need a simple momentary key release at the jamb, is there a less complicated option than the Schlage 653-1414?
Yes. The BEA 10JAMBSWITCHMOM is an access control keyswitch plate with momentary operation, a single fixed function with nothing to configure. The Schlage 653-1414 carries configurability the simpler plate does not need to offer: clockwise or counterclockwise key turn, momentary or maintained action set in the field, and options including an anti-tamper switch, red and green LEDs and a Schlage Everest cylinder. For a one-function momentary release with no key system to match and no state indication required, the 10JAMBSWITCHMOM covers the opening with fewer decisions.
22) Is there tamper protection on the Schlage 650 keyswitch for a public area?
An anti-tamper switch is available as an ordered option, along with a heavy-duty plate. That combination is what you want on a switch mounted in a corridor, garage entry, or anywhere the public can reach it rather than a staff-only vestibule.
23) What finish does the Schlage 653-1414 keyswitch come in?
Satin stainless steel, finish 630, which is what every ordering combination is built on. It's the standard finish for the series and the one that matches the satin stainless push plates and pulls already on most commercial aluminum and hollow metal openings. Three additional architectural finishes exist in the 650 Series, but note that the water resistant cover is not offered with special finishes.
How fast can I get the Schlage Electronics 653-1414 CYL delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Schlage Electronics 653-1414 CYL come with a warranty?
Absolutely. The Schlage Electronics 653-1414 CYL is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Schlage Electronics 653-1414 CYL?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Schlage Electronics 653-1414 CYL from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!