Schlage L9080 - Storeroom 07 L...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$1,451.00
$839.51
Schlage L9080 07 Lever Mortise Storeroom Lock in Satin Chrome (626), showing mortise case, keyed cylinder, 07 lever handle, and wrought rose — front three-quarter view

Schlage L9080 - Storeroom 07 Lever Mortise Lock - Grade 1 Non-Deadbolt Function Single Cylinder Keyed Lever Lock

(1 review) Write a Review

Model: L9080P 07B 626
From the L9000 Series Collection
$1,451.00
$839.51
Selected Finish is
Selected Rose/Escutcheon is
Selected Cylinder is
Selected Keying is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$1,451.00
$839.51
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Schlage L9080 Storeroom Mortise Lock with 07 Lever

The Schlage L9080 is a Grade 1 mortise lock in storeroom (non-deadbolt) function. Outside lever is always inoperable; the latchbolt retracts by key from outside only. Inside lever is always free for immediate egress. The auxiliary latch deadlocks the latchbolt when the door is closed. Meets ANSI/BHMA A156.13 Grade 1 Operational and Security standards and is UL listed for 3-hour fire doors.

Function Description

  • Latchbolt retracted by key outside only; outside lever is always inoperable.
  • Inside lever always free for immediate egress.
  • Auxiliary latch deadlocks latchbolt when door is closed.
  • ANSI/BHMA Function: F07

Specifications

  • Grade: Grade 1 (ANSI/BHMA A156.13)
  • Fire Rating: UL Listed, 3-hour fire door
  • Case Size: 4-7/16" x 6-1/16" x 1"
  • Backset: 2-3/4"
  • Door Thickness: 1-3/4"
  • Armor Front: 1-1/4" x 8"
  • Standard Strike: 10-072, 1-1/4" x 4-7/8" square corner, box (1-3/16" lip length)
  • Standard Cylinder: Conventional 6-pin, C Keyway
  • Duty Level: Heavy Duty
  • Substrate: CRS with Zinc Dichromate Plating
  • Warranty: 3 Year Limited

Cylinder Options

  • P - Conventional 6-pin Cylinder (C Keyway)
  • L - Less Conventional Cylinder
  • B - SFIC Less Prep Core
  • J - Schlage FSIC Less Core
  • T - Schlage FSIC With Construction Core
  • R - Schlage FSIC With Core, S123 Keyway
  • H - 7-Pin SFIC Prep, With Construction Core

Rose and Escutcheon Options

  • A - Wrought Rose
  • B - Wrought Rose
  • L - Cast/Forged Escutcheon (available on 1-3/8" to 2-1/2" doors)
  • N - Wrought Escutcheon (available on 1-3/4" to 2-1/4" doors)

Certifications

  • ANSI/BHMA A156.13 Grade 1 Operational and Security
  • UL Listed for 3-hour fire door
  • Meets Buy American Act (BAA)
  • Meets ADA requirements

About the Schlage L Series

The L Series is Schlage's commercial-grade mortise lock platform, built for institutional and heavy-use applications. The L9080 is part of the L9000 Series, which supports conventional, SFIC, and FSIC cylinder formats and is compatible with Von Duprin exit devices and related L Series trim.

Downloads and Resources

Manufacturer Resources

Product Specs

Subcategory:
Mortise Locks
Product Group:
Mechanical Locks
Series:
L Series
Function Description:
Latchbolt retracted by key outside only; outside lever is always inoperable. Inside lever always free for immediate egress. Auxiliary latch deadlocks latchbolt when door is closed.
Grade:
Grade 1
Duty Level:
Heavy Duty
Keyed Function:
Single Cylinder
Standard Cylinder:
Conventional 6-pin Cylinder, C Keyway
Handle Type:
Lever
Standard Strike:
10-072 1-1/4" x 4-7/8" Square Corner Strike, Box (1-3/16" Lip Length)
Mortise Case Size:
4-7/16" x 6-1/16" x 1"
Warranty:
3 Year Limited
Keyed:
Yes
ANSI/BHMA:
F07
Product Subgroup:
Mortise Locks and Trim
Product Type:
Mortise Locks
Commercial/Residential:
Commercial
Lock Type:
Mortise
Lock Function:
Storeroom
Handle Design:
07 Lever
Lever/Knob Design:
07 Lever
IMAP Policy:
Yes
Product Attribute:
Mortise Locks
Electronic:
No
Product Model:
L9080
Collection:
L9000 Series
Product Function:
Storeroom
Door Hand Direction:
Handed
Door Thickness Range:
1-3/4"
Product Substrate:
CRS with Zinc Dichromate Plating
Product Category:
Mechanical Locks
Backset (Distance):
2-3/4"
Department:
Door Hardware

Schlage L9080P 07B 626 – Frequently Asked Questions

1) Will the Schlage L9080 storeroom mortise lock fit a 1-3/4 inch door?
The L9080 is built for 1-3/4 inch doors, which is the standard commercial door thickness. It takes a 2-3/4 inch backset and a mortise pocket sized for a 4-7/16 x 6-1/16 x 1 inch case. If your doors are thicker, the L Series does offer door thickness options, but the standard L9080 as configured is a 1-3/4 inch lock. One thing to watch on trim: the L cast/forged escutcheon covers 1-3/8 to 2-1/2 inch doors and the N wrought escutcheon covers 1-3/4 to 2-1/4 inch, so trim choice has its own thickness range.
2) What does storeroom function mean on a Schlage L9080, and is it right for a mechanical or supply room?
Storeroom means the outside lever is always inoperable. You get in from the corridor side with a key only, and the key retracts the latchbolt. The inside lever is always free, so anyone in the room walks out without a key or a thumbturn. The door never sits unlocked by accident, which is exactly what you want on a storeroom, mechanical room, IT closet or supply room. An auxiliary latch deadlocks the latchbolt when the door closes so it cannot be carded. If you need staff to be able to leave the outside lever unlocked during the day, storeroom is the wrong function for that opening.
3) Is the Schlage L9080 mortise lock fire rated for a labeled door?
The L9080 is UL listed for 3-hour fire doors, and UL/cUL listed for A label single doors up to 4 by 10 feet and pairs up to 8 by 10 feet. The letter F and the UL symbol stamped on the latch front are what your inspector looks for. It is also ANSI/BHMA A156.13 Grade 1 for both security and operational, function code F07, and it meets ADA requirements. Worth knowing before you order cylinders: with FSIC interchangeable cores the rating drops to Grade 1 operational, Grade 2 security, and with SFIC cores to Grade 1 operational, Grade 3 security.
4) Do I have to specify a hand when ordering a Schlage L9080 mortise lock?
Yes, the L9080 is a handed lock, so the order needs the hand of the opening. Stand outside the door: if the hinges are on your right it is right hand or right hand reverse, on the left it is left hand or left hand reverse, with the reverse designation applying when the door swings toward you. Getting this wrong on a mortise lock means the lever is upside down and the latch faces the wrong way.
5) Which cylinder option should I pick on the Schlage L9080 if my building is on small format interchangeable core?
Seven cylinder choices cover most keying programs. For SFIC buildings, B comes with the SFIC prep but no core, and H gives you a 7-pin SFIC prep with a construction core so the trades can use the door before you swap in your permanent core. For Schlage full size IC, J is less core, T ships with a construction core, and R ships with a core in S123 keyway. P is the conventional 6-pin cylinder in C keyway, which is what the lock ships with as standard, and L is less conventional cylinder if your locksmith is supplying it. If you are matching an existing SFIC system, pick B or H and set the cores yourself.
6) Will the Schlage L9080 latch into the strike prep already in my frame?
The L9080 ships with the 10-072 strike, 1-1/4 by 4-7/8 inches, square corner, with a 1-3/16 inch lip and a box. That is the standard ANSI square corner mortise strike footprint, so if your frame already has a mortise lock in it the cutout usually carries over. Lip length is the thing to check against your frame reveal, since 1-3/16 inches has to reach past the stop without extending into the traffic path. The armor front on the lock measures 1-1/4 by 8 inches.
7) What is the closest cross-brand equivalent to the Schlage L9080 storeroom mortise lock?
The Accentra 8805FL from the 8800 Series is the nearest match: it is a Grade 1 storeroom-function mortise lock, the same grade and function the L9080 carries. The Cal-Royal NM8080 is another Grade 1 storeroom mortise lockset, listed for 1-3/4 inch doors, which is the door thickness the L9080 is built for. Both cover the same opening type - a door that stays locked from the outside and always allows egress from the inside. Differences show up in cylinder handling: the L9080 ships standard with a conventional 6-pin C keyway cylinder and can be ordered in SFIC and Schlage FSIC formats, while the NM8080 is described with an interchangeable core option.
8) The opening needs a classroom lock, not storeroom - what mortise lock should be used instead?
Storeroom function on the L9080 means the outside lever is always inoperable and the key only retracts the latchbolt; it will not let a teacher lock the door from the corridor side and leave it unlocked afterward. For classroom function in a mortise case, the Corbin Russwin ML2003 is a Grade 1 mortise classroom lockset for 1-3/4 inch doors, and the Cal-Royal NM8070 is a Grade 1 classroom mortise lockset also listed at 1-3/4 inch. Both mortise into the same door thickness the L9080 uses, so the door prep decision is about function, not about the leaf.
9) What is the difference between a storeroom mortise lock and an office or entrance mortise lock?
On the L9080 the outside lever is always inoperable and only the key retracts the latchbolt, so the door cannot be left in an unlocked state. An office or entrance function lets the outside lever be unlocked for the business day. The Cal-Royal NM8050 is a Grade 1 office/entrance mortise lockset with auxiliary deadlatch for 1-3/4 inch doors, and the Hager 3850E is a Grade 1 office mortise lock with lever and escutcheon, non-keyed, on a 2-3/4 inch backset. Choose by whether anyone should be able to leave the opening unlocked.
10) Can a Schlage L9080 be swapped for a Baldwin 6310 storeroom mortise lock body?
Not without changing the door prep. The Baldwin 6310 Entry/Storeroom mortise lock body is built on a 2-1/2 inch backset and is listed for doors 1-3/8 inch and over, while the L9080 uses a 2-3/4 inch backset and a 1-3/4 inch door thickness. The quarter-inch backset difference moves the lever and cylinder centerline relative to the door edge, so the mortise pocket and face bores do not line up. The Baldwin 6310190RRLS is the right hand reverse lever-by-lever version of that same 2-1/2 inch backset body, so it carries the same prep difference.
11) What looks like a substitute for a storeroom mortise lock but will not secure the door?
Several mortise-labelled parts do not lock an opening. The Emtek 3019 Brisbane, 3102 Memphis, 3104 Hamilton, and 3106 Manhattan mortise entrance locksets are dummy function - trim only, with no latching. The Falcon MESC600DT is dummy escutcheon lever trim for M9900 Series exit devices. The Sargent 130KB and 130W are mortise thumbturns, single components rather than a lockset. The L9080 is a keyed single-cylinder storeroom lock whose auxiliary latch deadlocks the latchbolt when the door is closed; none of those dummy or trim parts perform that.
12) How do I get electrified storeroom operation on a mortise opening?
The L9080 is a mechanical, non-electronic storeroom lock. Where the storeroom opening has to unlock on a signal, the Command Access ML190 Series ML19092-M is a heavy-duty motorized mortise lock in storeroom function with field selectable EL/EU operation on 24VDC, and the BEST 45HW Series is a heavy-duty wired electromechanical mortise lock running 12V or 24V. The Command Access unit is the direct function match, since it is the only electrified peer carrying storeroom function.
13) Will a Schlage L9080 work on an aluminum storefront or glass door?
The L9080 is a commercial mortise lock cased at 4-7/16 inch by 6-1/16 inch by 1 inch for a 1-3/4 inch door, which is a swing-door mortise pocket rather than a narrow stile or glass rail. For those openings, the Kaba Ilco BR Series is a glass door bottom rail lock, the Alarm Lock DL1300NW Trilogy Networx wireless keypad lock is made for Adams Rite deadlatches, and the Dormakaba E-Plex 2066 is a wide stile mortise lock. Match the part to the door construction before ordering.
14) Which mortise storeroom lock is handed and which can be reversed in the field?
The L9080 is a handed lock, so hand has to be determined before ordering. Among the peers, the BEST 45HCAC public entrance mortise lock body and the Falcon MA101 Grade 1 heavy-duty passage lock are both described with field reversible operation, and the Kaba Ilco 185 Series is supplied with no handing. If a job needs stock that can go on either hand without a return, the field reversible bodies handle that; if the L9080 is the specified lock, confirm the hand of each opening at order time.
15) Can I key a Schlage L9080 storeroom lock alike with the other locks on my building?
Keying is a required choice at order. KD is keyed different and is the default, KA is keyed alike when you want one key to run several doors, and there is a less-cylinder route if your locksmith is keying into an existing system. The standard cylinder is a conventional 6-pin in C keyway. For a property manager standardizing a fleet, KA across a run of storerooms with a separate master is the usual play, and there is a field for special cylinder or keying requirements on the order.
16) Will the Schlage L9080 lever match the exit devices and other Schlage locks in my building?
The 07 lever design on the L9080 suites with Von Duprin exit devices and with the related L Series products LE, LM9200, LM9300 and LT. So a corridor on Von Duprin devices and back-of-house doors on L9080 storeroom locks read as one hardware family. Across the L Series there are 33 lever designs, two knob designs, five rose and three escutcheon designs, so if the rest of your building is on a different lever the same lock body carries it.
17) Should I use a mortise storeroom lock like the Schlage L9080 or a cylindrical lockset?
A mortise lock goes into a pocket routed into the door edge rather than a bored hole, so it carries more mechanism and more abuse. That is why the L9080 rates Grade 1 for both security and operational and is classed heavy duty. The tradeoff is the prep: you need a mortise pocket sized for a 4-7/16 x 6-1/16 x 1 inch case, which a bored door does not have. On a door already prepped for a cylindrical lock, converting to mortise means a new door or a heavy modification. Where the pocket already exists, or on new commercial doors, mortise is the durable answer.
18) What are the alternatives to a Schlage L9080 if I need a Grade 1 storeroom mortise lock from another brand?
Two direct storeroom-function peers: the Accentra 8805FL, a Grade 1 storeroom mortise lock in the 8800 Series with the Arcadia lever, and the Cal-Royal NM8080, a Grade 1 heavy duty storeroom mortise lockset with an interchangeable core option that is listed for 1-3/4 inch doors, the same thickness the L9080 takes. The differentiator on the Schlage is the breadth of keying and trim: seven cylinder configurations covering conventional, SFIC and Schlage FSIC, plus twelve finishes.
19) I need a classroom or office function instead of storeroom on a mortise lock. What should I order?
Storeroom is key-only from the outside with no way to leave the lever unlocked, so it is wrong for a room staff need to hold open-lever during the day. For classroom function, the Corbin Russwin ML2003 is a Grade 1 mortise classroom lockset for 1-3/4 inch doors, and the Cal-Royal NM8070 is a Grade 1 classroom mortise lockset with auxiliary deadlatch on the same thickness. For office or entrance function, the Cal-Royal NM8050 is the Grade 1 entrance/office equivalent. The Schlage L Series itself runs over 55 functions off the same lock body if you want to stay in one family.
20) Does the Schlage L9080 storeroom lock have a deadbolt?
No deadbolt. The L9080 is a non-deadbolt storeroom function, single cylinder, and it holds the door with a latchbolt that the auxiliary latch deadlocks once the door closes. That deadlocking latch is what resists a credit card attack. If you actually need a throw bolt on the opening, that is a different function, and for a straight mortise deadbolt the Sargent 4874 is a double cylinder mortise deadbolt on a 2-3/4 inch backset, the same backset as the L9080.
21) Can the Schlage L9080 be wired for access control or card readers?
The L9080 is a mechanical lock, not electronic. For an electrified opening you want a different product. Within Schlage Electronics, the LEMD-GRW is a Grade 1 ENGAGE Series wireless mortise lock with a 125kHz proximity reader and a 3 hour fire rating, and the CO-100 is a standalone electronic mortise lock for 1-3/4 inch doors. Command Access also makes the ML190 Series motorized mortise lock with field selectable EL/EU operation on 24VDC in a storeroom function, which is the closest electrified match to what the L9080 does mechanically.
22) Does the Schlage L9080 meet Buy American requirements for a government job?
The L9080 meets the Buy American Act. It also carries Miami-Dade NOAs and Florida Building Commission listings, and complies with the California Referenced Standards Code where the lever has a return to door of 1/2 inch or less. For a federal, state or hurricane-zone spec that combination usually clears the submittal in one pass, alongside the ANSI/BHMA A156.13 Grade 1 certification and the ANSI/ASTM F476-76 Grade 40 UL listing.
23) Is there a non-keyed mortise lock for a door that does not need to lock?
For a passage opening where no key is wanted, the Falcon MA101 is a Grade 1 heavy-duty mortise passage lock with field reversible operation and a fire rating, and the Hager 3810S is a Grade 1 passage mortise lock with rose trim on a 2-3/4 inch backset for 1-3/4 to 2-1/2 inch doors - the same 2-3/4 inch backset the L9080 uses, so the mortise pocket and cross-bore centerline match. The Hager 3810E is the same passage function with escutcheon trim rather than a rose. The L9080 is a keyed single-cylinder lock, so a passage opening does not need what it carries.
24) What mortise lock should be used for a restroom or bedroom door instead of a storeroom lock?
A storeroom lock like the L9080 is keyed and has no inside locking control, so it is the wrong function for a privacy door. The Cal-Royal NM8440 is a Grade 1 privacy mortise lockset with a deadbolt for 1-3/4 inch doors, and the Hager 3840S is a Grade 1 privacy mortise lock on a 2-3/4 inch backset for 1-3/4 to 2 inch doors. Both privacy locks accept the same 2-3/4 inch backset prep the L9080 uses.
25) Which mortise lock replaces a storeroom lock when the door needs a keypad instead of a key?
The L9080 is a mechanical lock with no electronics, opened by key from the outside. If the opening needs codes rather than keys, the BEST 45HZ EZ Series is an electronic keypad mortise lock with key override, the Accentra NTM623-NR nexTouch Generation 3 mortise lock uses a capacitive touchscreen keypad with cylinder override and no deadbolt, and the Dormakaba E-Plex 2066 is an electronic pushbutton keyless mortise lock. All three replace the mortise case entirely rather than adding trim to an L9080.
26) The opening needs a deadbolt as well as a latch - what mortise lock covers that?
The L9080 is a non-deadbolt storeroom function; its security comes from an auxiliary latch that deadlocks the latchbolt when the door is closed, not from a separate bolt. Where a throw bolt is required, the Sargent 4874 is a double cylinder mortise deadbolt on a 2-3/4 inch backset, matching the L9080 backset, and the Sargent 7925 is a Grade 1 heavy-duty corridor/dormitory exit function mortise lock with rose trim and a single cylinder deadbolt. The Kaba Ilco 185 Series is a deadbolt-function mortise lock supplied with no handing.
27) What mortise lock is used on a behavioral health door instead of a standard lever lock?
A standard 07 lever like the one on the L9080 presents a projecting handle. For ligature-resistant openings, the TownSteel MRX-L-01 is a Grade 1 heavy-duty anti-ligature lever mortise lockset in passage function for 1-3/4 inch doors, the MRX-A-01 is the same passage function with satin stainless ligature-resistant arch trim, and the Marks USA 5PDN is a Grade 1 hospital passage mortise push/pull paddleset that is ligature resistant and ADA compliant in satin stainless steel. All three are passage function, so they do not key the opening the way the L9080 does; they suit 1-3/4 inch doors, the same thickness the L9080 is built for.
28) Which mortise lock body should be used when the storeroom door also needs the outside lever to work part of the day?
Storeroom function on the L9080 keeps the outside lever inoperable at all times. A public entrance function instead allows the outside lever to be locked and unlocked as needed: the BEST 45HCAC is a heavy-duty 45H Series mortise lock body in public entrance function with field reversible operation. For a lockdown-capable opening, the BEST 45HCAINL is a heavy-duty mortise lockbody in intruder function. Both are lock bodies, so trim is selected separately, where the L9080 is ordered with its lever, rose or escutcheon, and finish together.
29) What is the difference between the Schlage L9080 and the Schlage Electronics LE Series mortise locks?
The L9080 is a mechanical Grade 1 storeroom mortise lock in the L Series, keyed single cylinder, for 1-3/4 inch doors. The Schlage Electronics LEBMB-ADD is a Grade 2 mobile-enabled LE Series mortise lock with push button and LED, offering privacy, office, and apartment functions on a 1-3/4 inch door with a 3-hour fire rating. The LEMD-GRW is a Grade 1 ENGAGE Series wireless mortise lock with proximity reader and a 3-hour fire rating. The L9080 carries a Grade 1 rating and the LEBMB-ADD is Grade 2, and the L9080 is keyed rather than credentialed.
30) Is a knob-operated mortise lock available instead of a lever for a storeroom door?
The L9080 is ordered with the 07 lever. Where a knob is wanted on a mortise case, the Baldwin 6310 Entry/Storeroom is a knob-by-knob mortise lock body on a 2-1/2 inch backset for doors 1-3/8 inch and over, and the Baldwin 6301 Entry/Apartment is a knob-by-knob body on the same 2-1/2 inch backset for 1-3/4 inch doors and over. Note that both use a 2-1/2 inch backset where the L9080 uses 2-3/4 inch, and lever trim also complies with ADA requirements where knobs generally do not.
31) Which mortise lock suits a dormitory or apartment corridor door rather than a storeroom?
The Sargent 7925 is a Grade 1 heavy-duty corridor/dormitory exit function mortise lock with rose trim and a single cylinder deadbolt, and the Baldwin 6301LS is an Entry/Apartment lever-by-lever mortise lock body on a 2-1/2 inch backset for doors 1-3/4 inch and over. The L9080 storeroom function keeps the outside lever permanently inoperable, which is not how a resident-controlled door works. Note the Baldwin uses a 2-1/2 inch backset against the 2-3/4 inch backset on the L9080.
32) Which Grade 1 mortise storeroom lock offers the widest finish and trim selection?
The L9080 is ordered across 12 finishes including bright brass 605, satin brass 606, antique brass 609, satin bronze 612, oil rubbed bronze 613, satin nickel 619, matte black 622, bright chrome 625, satin chrome 626, bright stainless 629, satin stainless 630, and aged bronze 643E, with wrought rose, cast/forged escutcheon, and wrought escutcheon trim choices. Among the Grade 1 storeroom peers, the Accentra 8805FL is supplied with the Arcadia lever and the Cal-Royal NM8080 is a Grade 1 storeroom mortise lockset with an interchangeable core option. Where a facility is standardizing appearance across many openings, the finish and trim range is the axis to compare.
33) What finishes does the Schlage L9080 mortise lock come in, and which one holds up in a high traffic corridor?
Twelve finishes: 605 bright brass, 606 satin brass, 609 antique brass, 612 satin bronze, 613 oil rubbed bronze, 619 satin nickel, 622 matte black, 625 bright chrome, 626 satin chrome, 629 bright stainless, 630 satin stainless and 643E aged bronze. For heavy institutional traffic, 626 satin chrome and 630 satin stainless are the two that hide wear and handprints and are the usual school and hospital standard. Bright finishes show every scuff. The lock body itself is CRS with zinc dichromate plating.
34) What is the difference between the rose and escutcheon trim options on the Schlage L9080?
Four trim choices. A and B are wrought rose, a compact round plate around the lever, which is what most commercial openings use and what suits a plain flush door. L is a cast/forged escutcheon, a long plate covering both lever and cylinder, and it fits 1-3/8 to 2-1/2 inch doors. N is a wrought escutcheon for 1-3/4 to 2-1/4 inch doors. Escutcheon trim covers more of the door face, which matters when you are replacing older hardware and want to hide previous prep. The lever bushing locks in place so there are no exposed screws on the inside lever.
35) How does the Schlage L9080 resist someone pulling the lever off to get in?
A security blocking hub inside the case stops the lock being picked by removing the levers, which is the classic attack on a lever mortise lock. The case is CRS with zinc dichromate plating, and it is certified Grade 1 for security as well as operational under ANSI/BHMA A156.13. If you want a higher-security cylinder in it, the L Series accepts a UL437 listed cylinder by specifying the Primus 20-500 Series.
36) Is there a lighter-duty mortise latch for an interior door that does not need a Grade 1 lock?
The Codelocks CL2255 is a medium-duty electronic tubular mortise latch from the CL2000 Series in a brushed steel finish. The L9080 is a heavy-duty Grade 1 lock built on a CRS case with zinc dichromate plating, sized 4-7/16 inch by 6-1/16 inch by 1 inch, which suits high-traffic commercial openings; a medium-duty latch suits interior doors with lighter cycle demands. The two prep differently, so this is a design decision made before the door is machined, not a later swap.
How fast can I get the Schlage L9080P 07B 626 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Schlage L9080P 07B 626 come with a warranty?
Absolutely. The Schlage L9080P 07B 626 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Schlage L9080P 07B 626?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Schlage L9080P 07B 626 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.

Videos

Product Reviews

  • 5
    High-Quality Storeroom Lock with Keyed Convenience

    Posted by Jackson on Jul 24th 2024

    The Grade 1 rating ensures top-notch durability, and the keyed lever is easy to operate.

!