Securitron Glass Door Accessories

The GDB exists to solve the frameless-glass problem, where there is nothing to fasten an armature to. On an aluminum storefront door with a proper top rail, you mount the armature directly to the rail and the bracket is unnecessary. Use it where the glass has no rail at the header.

No. The DCP-12X3 is a dress cover plate sold in the Securitron Glass Door Series alongside the GDB glass door bracket and the AKG adhesive kit, so it belongs to the glass door mounting family. The Dortronics 6510/COV is an anti-tamper alarm cover for 6500 Series pull stations and 5000 Series push buttons, so it protects a wall-mounted release device rather than dressing a glass door mounting bracket. Buyers finishing a glass door maglock installation want the DCP-12X3; buyers guarding a pull station or push button from nuisance activation want the 6510/COV.

They solve different mounting problems. The GDB is a glass door bracket in the Securitron Glass Door Series and is paired with the AKG adhesive kit for attachment. The Cal-Royal 8641-SM is a single gang surface mount box in the 8600 Series, which gives a device a surface enclosure on a wall or frame rather than carrying hardware on the glass leaf itself. If the door is glass and the hardware has to land on the leaf, the GDB and AKG are the glass door path; the 8641-SM is the choice when a single gang device needs a surface box.

The Securitron Glass Door Series items are replacement parts for mounting and dressing: the GDB glass door bracket, the AKG adhesive kit for the GDB, and the DCP-12X3 dress cover plate. Request-to-exit switching comes from a separate device. Command Access offers field installable REX kits matched to specific exit hardware, including the CRSREXKIT-ED for Cal Royal 22/98 and Sargent 80 Series with an SPDT switch, and the CYREXKIT-ED for Corbin 5000 and Yale 7000 exit devices rated 5A. For a mortise lock opening, the Command Access REX-KIT-ML is the ML1-Series field installable version. Order the mounting parts and the REX device to suit the hardware already in the opening.

Three parts are sold individually: the GDB glass door bracket, the AKG adhesive kit for that bracket, and the DCP-12X3 dress cover plate. Each is ordered as its own item, so a bracket replacement on an existing installation does not force you to buy the adhesive or the cover plate you already have.

The Securitron glass door parts are for mounting an electromagnetic lock to frameless glass, not for protecting a button. For a tamper cover over a push button or pull station, the Dortronics 6510/COV anti-tamper alarm cover fits 6500 Series pull stations and 5000 Series push buttons. Different job, different part.

The Securitron Glass Door Series covers the mounting and trim side: the GDB glass door bracket, the AKG adhesive kit for the GDB, and the DCP-12X3 dress cover plate, all commercial electronic access control replacement parts. Low voltage power is a separate order. The Adams Rite 4605 is a regular transformer stepping 115 VAC down to 12 or 24 VAC with a 40 volt-amp output, which is the kind of supply that feeds a low voltage lock. Confirm the lock's voltage and current draw against the supply before ordering.

The Securitron Glass Door Series parts are mounting and trim components - the GDB glass door bracket, the AKG adhesive kit that bonds it, and the DCP-12X3 dress cover plate. A release device is a separate line item. The DynaLock 6451-36 is an exit sensor bar sized for a 36 inch door, so it gives the egress touch surface across the leaf. Specify the sensor bar to the door width and keep the glass door bracket and adhesive kit for carrying the lock hardware.

The DCP-12X3 is a dress cover plate in the Securitron Glass Door Series, so its job is finishing the appearance of the glass door mounting. Weather protection at a strike is a different part: the HES 1000-102 is a 1006 Series rain guard for rain or high dust areas and carries a Grade 1 rating. The Securitron glass door accessories are Grade 2 commercial parts. On an exposed opening, use the rain guard where the strike needs shielding and the dress cover plate where the glass door mounting needs a finished face.

They are catalogued as replacement parts, which means they are the pieces you order to repair or refit an existing electromagnetic lock installation on a glass door as well as to complete a new one. A cracked bracket, a lost cover plate, or a re-bond after the glass is replaced are all served from these three items.

No. The LCN 8310-3803 is a 3V wireless conversion kit for jamb mount touchless actuators, so it converts an actuator at the jamb to wireless operation. The Securitron GDB is a glass door bracket, supported by the AKG adhesive kit that bonds it and the DCP-12X3 dress cover plate that finishes it. A frameless glass opening with a touchless actuator at the jamb can take both: the LCN kit on the actuator, the Securitron parts carrying the lock hardware on the glass.

No. The AKG is the adhesive kit for the GDB glass door bracket, so it is a bonding component for mounting on glass. Transferring power into a moving leaf is a separate part: the RCI 9500/9501 Series is a mortise pin transfer with a tamper-resistant design rated 1.5A at 24VAC. Specify the AKG with the GDB when the bracket is being bonded to the glass, and a power transfer separately if current has to cross from frame to leaf.