SEPCO LL27 LL1ACG Type LL Cond...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$5.95
SEPCO LL27 LL1ACG Type LL Conduit Body, Copper-Free Aluminum, Complete with Cover & Gasket

SEPCO LL27 LL1ACG Type LL Conduit Body, Copper-Free Aluminum, Complete with Cover & Gasket

(No reviews yet) Write a Review

Model: LL1ACG

In Stock (leaves warehouse same day if ordered before 3pm ET)

$5.95
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

SEPCO LL27 LL1ACG Type LL Conduit Body with Cover & Gasket, Die-Cast Aluminum

The SEPCO LL27 LL1ACG is a Type LL conduit body die-cast from copper-free aluminum and supplied complete with a matching cover and gasket. Designed as an access and pull point for rigid or intermediate metal conduit runs, this fitting gives electricians a rugged, ready-to-install body for routing, splicing, and pulling conductors through a conduit system. This SEPCO conduit body is available across trade sizes from 1/2" through 2" — including 1/2", 3/4", 1", 1-1/4", 1-1/2", and 2" — so installers can match the body to the conduit run at hand. The copper-free aluminum construction keeps the fitting lightweight compared to cast iron while still standing up to the demands of everyday commercial and industrial wiring work.

Key Features

  • Trade Size Range: Available in 1/2", 3/4", 1", 1-1/4", 1-1/2", and 2" sizes to match rigid or intermediate metal conduit runs.
  • Type LL Configuration: Standard Type LL layout, commonly used where an outlet-to-outlet turn is needed at a specific access point along a conduit run.
  • Die-Cast, Copper-Free Aluminum Construction: A durable, precisely formed body that is lighter to handle and install than a comparable cast iron or malleable iron body.
  • Cover and Gasket Included: Ships as a complete LL1ACG assembly with a matching cover and gasket, ready to close up and seal against the body once wiring work inside the fitting is finished.
  • Matched LL1ACG Fit and Finish: The body, cover, and gasket are manufactured to the LL1ACG specification and sized to fit together as a matched set, simplifying inventory and installation for electrical contractors.
  • Conduit-Grade Access: As a conduit body rather than a simple coupling or elbow, the LL1ACG provides interior access for pulling, splicing, or redirecting conductors at points where a solid run of conduit would otherwise make wiring impractical.

Technical Specifications

  • Trade Size: 1/2" - 2"

Typical Applications

  • Conduit and Raceway Systems
  • Commercial and Industrial Electrical Installations
  • Wire Pulling, Splicing, and Directional Access Points
  • New Construction and Renovation Electrical Projects

Why SEPCO?

SEPCO builds the LL1ACG conduit body from die-cast, copper-free aluminum for a fitting that is both durable and manageable on the jobsite, and ships it as a complete cover-and-gasket assembly so installers are not left hunting for matching accessories. Offered across 1/2" through 2" trade sizes — 1/2", 3/4", 1", 1-1/4", 1-1/2", and 2" — the LL1ACG gives electricians a dependable Type LL access point with straightforward, code-oriented construction backed by the SEPCO name that electrical professionals rely on for conduit fittings and accessories.

Manufacturer Resources

SEPCO Product Catalog

Product Specs

list_batch:
SEP-20260911
Product Type:
Type LL Conduit Body
Configuration:
Type LL
Department:
Electrical
Product Group:
Conduit & Raceway
Product Subgroup:
Conduit Bodies & Covers
Product Material:
Copper-Free Aluminum

SEPCO LL1ACG – Frequently Asked Questions

1) What is a Type LL conduit body used for, and how is it different from an LR or LB?
A Type LL body, like the SEPCO LL1ACG, turns the conduit run to the left as you face the removable cover, and gives you an opening to pull and splice conductors at that point. An LR turns right from the same viewpoint and an LB turns back into a wall. Pick the letter by the direction the run has to go relative to the cover face, because the body itself is not reversible.
2) Will the SEPCO LL conduit body work on 1-1/4 inch rigid steel conduit?
Yes. The SEPCO LL series is offered in 1/2, 3/4, 1, 1-1/4, 1-1/2 and 2 inch trade sizes, and the 1-1/4 inch body is part number LL4ACG. The hubs are threaded for rigid or intermediate metal conduit (RMC/IMC), so it threads straight onto standard 1-1/4 inch rigid.
3) Do I have to order the cover and gasket separately for the SEPCO LL conduit body?
No. Each SEPCO LL body ships as a complete ACG assembly with a matching cover and gasket already included, so there is nothing else to add to close and seal the fitting after the wire pull.
4) Is the SEPCO LL conduit body safe to use in a facility where copper alloys are a problem?
The body is die-cast from copper-free aluminum, which is the construction normally specified where copper and copper alloys must be avoided, such as refineries and other hydrocarbon process areas. The cover and gasket come matched to the same body.
5) Aluminum or iron conduit body for a commercial conduit run?
The SEPCO LL is die-cast aluminum, which is noticeably lighter to handle and hang than a comparable cast iron or malleable iron body of the same trade size. That matters on overhead work and long runs with many access points. Where the install calls specifically for ferrous iron fittings, an aluminum body is not a substitute.
6) What part number do I order for a 2 inch SEPCO LL conduit body?
The 2 inch size is LL6ACG. Going down the range: LL1ACG is 1/2 inch, LL2ACG is 3/4 inch, LL3ACG is 1 inch, LL4ACG is 1-1/4 inch and LL5ACG is 1-1/2 inch. The numeral in the part number steps with the trade size, not with the inch value.
7) Can I use a conduit body instead of an elbow to change direction in a conduit run?
That is exactly what the SEPCO LL is for. Unlike a coupling or a sweep elbow, the LL body opens up with a removable cover so you can reach inside to pull, splice or redirect conductors at the turn. Use an elbow where you only need the bend and no access; use the LL where a solid run would make the pull impractical.
8) Will the gasket from one SEPCO LL size fit another?
No, treat each one as a set. The body, cover and gasket are made to the ACG specification and sized to fit together as a matched assembly for that trade size, so a 3/4 inch cover and gasket will not seal a 1-1/2 inch body. Order the complete size you need rather than mixing parts from the shelf.
How fast can I get the SEPCO LL1ACG delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the SEPCO LL1ACG come with a warranty?
Absolutely. The SEPCO LL1ACG is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the SEPCO LL1ACG?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the SEPCO LL1ACG from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!