You may also like
SHRNK-WRP 1/2INCHLL STYLE-CV-GSKT
Manufacturer Resources
Product Specs
- Application:
- For Use with Rigid/IMC Conduit
- Number Of Batteries:
- 0
- Product Group:
- Conduit & Fittings
- Product Type:
- Conduit Body - Series A - Rigid/IMC
- Department:
- Electrical
- Product Subgroup:
- Conduit Bodies
- Product Material:
- Aluminum Die Cast
Red Dot DALL-1-CG – Frequently Asked Questions
1) Will the Red Dot DALL-1-CG work on 1/2 inch rigid or IMC conduit?
Yes. The DALL-1-CG is a 1/2 inch LL style conduit body built for use with rigid and IMC conduit, so it threads onto standard 1/2 inch rigid or intermediate metal conduit runs. It is not intended for EMT, which uses compression or set-screw fittings rather than threaded ends.
2) What does the LL designation mean on a conduit body, and when do I use it instead of an LB or LR?
LL is a left-hand access body: looking at the back of the fitting with the cover facing you, the branch opening comes off the left side. LR is the mirror image to the right, LB turns to the back (typically used where conduit enters a wall), and a T body gives you three openings. Pick LL when the pull point and the direction of the run need the opening on the left. The DALL-1-CG is the 1/2 inch LL configuration.
3) Does the Red Dot DALL-1-CG come with a cover and gasket, or do I order those separately?
The cover and gasket are included. The DALL-1-CG ships as a complete assembly, body plus cover with gasket, so no separate cover kit is needed to close it out.
4) Is the DALL-1-CG conduit body suitable for outdoor or wet locations?
It is supplied with a gasketed cover, which is what seals the opening against water intrusion on exterior runs, and the body is die cast aluminum rather than steel, so it resists corrosion in damp and outdoor environments. For a wet location install, the gasket must be seated and the cover screws drawn down evenly.
5) Is the Red Dot DALL-1-CG aluminum or steel, and can I use it on a galvanized rigid conduit run?
Die cast aluminum. It threads onto galvanized rigid conduit without issue, which is standard practice, though in corrosive or marine environments some specs call for all one metal or for anti-seize on the threads to limit galvanic action between the aluminum body and the zinc-coated steel conduit.
6) What is the exact Red Dot part number I should order for a 1/2 inch LL conduit body with a gasketed cover?
Red Dot DALL-1-CG. That designation covers the 1/2 inch LL style aluminum body with cover and gasket, and it is the manufacturer part number to quote.
How fast can I get the Red Dot DALL-1-CG delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Red Dot DALL-1-CG come with a warranty?
Absolutely. The Red Dot DALL-1-CG is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Red Dot DALL-1-CG?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Red Dot DALL-1-CG from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.