You may also like
SHRNK-WRP 3/4 IN CHLR STYLE-CV-GSKT
Manufacturer Resources
Product Specs
- Application:
- For Use with Rigid/IMC Conduit
- Number Of Batteries:
- 0
- Product Group:
- Conduit & Fittings
- Product Type:
- Conduit Body - Series A - Rigid/IMC
- Department:
- Electrical
- Product Subgroup:
- Conduit Bodies
- Product Material:
- Aluminum Die Cast
Red Dot DALR-2-CG – Frequently Asked Questions
1) Will the Red Dot DALR-2-CG work with rigid and IMC conduit, or is it for EMT?
The DALR-2-CG conduit body is built for rigid and IMC conduit, with threaded 3/4 inch hubs. It is a Series A type LR body. If your run is EMT, you need a set-screw or compression style fitting instead, not this threaded body.
2) What trade size conduit does the Red Dot DALR-2 conduit body take?
3/4 inch. Both hubs are 3/4 inch threaded for rigid or IMC, so it drops straight into a 3/4 inch run without a reducer.
3) Does the Red Dot DALR-2-CG come with a cover and gasket, or do I order those separately?
The cover and gasket are included. The CG suffix on the DALR-2-CG means it ships with a Chlor style cover and a gasket, so you are not buying the body and then chasing a separate cover kit to close it up.
4) Is an LR conduit body the right choice, or should I use an LB or a T?
An LR body turns the run to the right as you face the cover, with the opening on the side. Use an LB when you need to turn back into a wall (the classic service entrance into a building), and a T when you need a third conduit entry for a branch or a pull point in two directions. The DALR-2-CG is the LR configuration in 3/4 inch for rigid or IMC.
5) Can I use the Red Dot DALR-2-CG outdoors on an exposed wall run?
It is a die cast aluminum body supplied with a cover gasket, which is how a conduit body gets sealed against driven rain and washdown on exposed work. Aluminum is the usual choice for exterior and damp locations where you want corrosion resistance without the weight of malleable iron.
6) Is the Red Dot DALR-2-CG aluminum or iron, and does that matter for my conduit?
Die cast aluminum. Pair it with aluminum rigid conduit for a matched system; if you are running galvanized steel rigid or IMC, aluminum bodies are commonly used but avoid direct contact with dissimilar metals in corrosive or chemical environments where galvanic action is a concern.
7) What part number do I give my supplier for the Red Dot 3/4 inch LR body with cover and gasket?
DALR-2-CG is the Red Dot part number. The DALR prefix is the aluminum LR body, the 2 is the 3/4 inch trade size, and CG is the cover and gasket.
8) Is the DALR-2-CG a pull point or can I splice conductors inside it?
Conduit bodies of this size are primarily pull and direction-change points. Whether you can splice inside depends on the body's volume against the conductor fill rules in your jurisdiction, so size the splice to the marked cubic inch capacity on the body rather than assuming it is a junction box.
How fast can I get the Red Dot DALR-2-CG delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Red Dot DALR-2-CG come with a warranty?
Absolutely. The Red Dot DALR-2-CG is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Red Dot DALR-2-CG?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Red Dot DALR-2-CG from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.