You may also like
SPECIAL PARALLEL SPLICE 6 AWG
Manufacturer Resources
Product Specs
- Country Of Origin:
- Mexico (MX)
- Product Subgroup:
- Splices
- Product Type:
- Non-Insulated Parallel Splice
- Voltage Rating:
- 600 V
- Department:
- Electrical
- Product Group:
- Wire Termination
- Product Color:
- Metallic
- Product Material:
- Copper
Sta-Kon CLE6PSD – Frequently Asked Questions
1) What wire size does the Sta-Kon CLE6PSD parallel splice take?
The CLE6PSD is a 6 AWG parallel splice. Both conductors entering the barrel need to be 6 AWG copper; it is not a reducing or combination splice, so pairing a 6 with an 8 or a 4 is outside what this connector is built for.
2) Is the CLE6PSD splice insulated, or do I have to tape or heat-shrink it?
It is a non-insulated splice, bare metallic copper barrel. After crimping you have to insulate it yourself with heat-shrink tubing, tape, or by housing it inside an enclosure. Plan on that material being part of the job.
3) Can I use this splice on a 480V feeder?
Yes. The CLE6PSD carries a 600 V rating, which covers 120/208, 277, and 480 V building circuits once the splice is properly insulated for the installation.
4) What is a parallel splice used for versus a butt splice?
A parallel splice joins two conductors running side by side in the same direction, both entering the barrel from the same end, which is what you want when you are tapping or doubling up a run. A butt splice joins two wires end to end from opposite ends of the barrel. The CLE6PSD is the parallel type, in 6 AWG.
5) Is the CLE6PSD a crimp connector or a mechanical set-screw lug?
It is a crimp splice, not a set-screw connector. You need the correct die and crimp tool for a 6 AWG copper barrel to make up the connection; there is no screw to torque.
6) Can I use the Sta-Kon CLE6PSD on aluminum conductors?
No. The barrel is copper and the splice is intended for copper conductors. For aluminum or AL/CU work you need a connector specifically rated for aluminum and supplied with the appropriate inhibitor compound.
7) What is the exact part number and manufacturer for ordering this 6 AWG parallel splice?
Order it as Sta-Kon CLE6PSD. Manufacturer part number CLE6PSD, a non-insulated 6 AWG copper parallel splice rated 600 V, made in Mexico.
How fast can I get the Sta-Kon CLE6PSD delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Sta-Kon CLE6PSD come with a warranty?
Absolutely. The Sta-Kon CLE6PSD is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Sta-Kon CLE6PSD?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Sta-Kon CLE6PSD from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.