You may also like
Blackburn Aluminum Compression Lug 4/0 AWG One-Hole 1/2 Inch Stud White
Model: BLACK-ATL40-12
Blackburn Aluminum Compression Lug 4/0 AWG One-Hole 1/2 Inch Stud WhiteProfessional Wire Termination SolutionThe Blackburn aluminum compression lug delivers reliable electrical connections for 4/0...
Blackburn
$134.58
$30.73
TANDEM LUG 1-2/0 AWG 1/2 BOLT PLAIN
Manufacturer Resources
Product Specs
- Country Of Origin:
- Mexico (MX)
- Product Group:
- Wire & Cable Management
- Product Type:
- Locktite Connectors
- Selling Unit Of Measure:
- each
- Standards:
- UL E9809
- Type2:
- Mechanical connectors
- Department:
- Electrical
- Product Subgroup:
- Connectors
- Product Material:
- Copper
Blackburn 32009TL – Frequently Asked Questions
1) What wire sizes does the Blackburn 32009TL tandem lug take?
The 32009TL is a tandem (two-conductor) mechanical lug rated for 1 AWG through 2/0 AWG copper conductors, with both barrels in that same range. If your feeders are larger than 2/0 or smaller than 1 AWG, this is the wrong lug.
2) What bolt size hole does the Blackburn 32009TL lug pad have?
The pad is drilled for a 1/2 inch bolt, so it lands on a 1/2 inch stud or bus hole. Confirm your equipment ground bar, bus pad, or motor terminal uses 1/2 inch hardware before ordering.
3) Is the 32009TL lug copper or aluminum, and can I use it on aluminum conductors?
Body material is copper. It is specified as a copper lug, so use it with copper conductors; for aluminum or dual-rated AL9CU applications you need a connector marked for aluminum.
4) Does the Blackburn 32009TL lug carry a UL listing?
Yes, it is covered under UL file E9809. That is the reference to cite on an inspection or submittal for the connector.
5) What does "plain" mean on the 32009TL tandem lug?
Plain means the copper body is supplied bare, with no tin plating. Bare copper is fine for dry indoor copper-to-copper terminations; where you are landing on an aluminum or plated bus, or in a damp or corrosive location, specify a tin-plated lug instead.
6) Is the 32009TL sold individually or in a box quantity?
It is sold each, one lug per unit, under manufacturer part number 32009TL. Order a piece count that matches the number of terminations, not the number of cables.
7) Do I need to order bolts or washers with the Blackburn 32009TL?
The lug is the connector body only, with a 1/2 inch bolt hole in the pad. The mounting bolt, nut, and any belleville or flat washers come from your equipment or are ordered separately, so plan that hardware into the job.
8) Where is the Blackburn 32009TL lug made?
Country of origin is Mexico. That is the figure to use on submittal or domestic-preference paperwork for this connector.
How fast can I get the Blackburn 32009TL delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Blackburn 32009TL come with a warranty?
Absolutely. The Blackburn 32009TL is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Blackburn 32009TL?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Blackburn 32009TL from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.