2 INCH RIGHT ANGLE CONDUIT SUPPORT
Manufacturer Resources
Product Specs
- Selling Unit Of Measure:
- each
- Idea Granular Category Code Igcc:
- 5027 >> Hanger for trapezoidal ceiling
- Surface Finishing:
- Galvanized
- Product Group:
- Hangers, Supports & Fasteners
- Department:
- Electrical
- Product Subgroup:
- Hangers, Straps & Supports
- Product Material:
- Malleable Iron
- Product Type:
- Conduit Hanger
Thomas & Betts RA 100 – Frequently Asked Questions
1) What conduit sizes does the Thomas & Betts RA right angle conduit support come in?
Three trade sizes: 1 inch (RA 100), 1-1/2 inch (RA 150), and 2 inch (RA 200). Each is ordered individually, one support per size, so pick the part number that matches the conduit run you are hanging.
2) Is the Thomas & Betts RA conduit support suitable for a damp or unfinished area like a parking garage or mechanical room?
The body is malleable iron with a galvanized finish, which is the usual combination for unfinished interior and sheltered exterior work such as mechanical rooms, garages and warehouse ceilings. For continuously wet or corrosive process areas, a stainless or PVC-coated support is the better call.
3) Do I need one RA support per conduit, or can it carry several runs?
One support per conduit. The RA series is sized by trade size (1 inch, 1-1/2 inch, 2 inch) and sold each, so a rack of multiple runs needs one support per pipe at every support point. If you are ganging several conduits off a single point, use a trapeze with strut and individual straps instead.
4) Will the RA 200 work for 2 inch EMT and 2 inch rigid?
The RA 200 is built for 2 inch trade size conduit, and trade size is common between EMT and rigid, so a 2 inch designation covers the run either way. What changes between them is weight, so space your supports to the code requirement for the raceway type you are installing.
5) What is a right angle conduit support actually used for?
It brackets a conduit run off a perpendicular surface, holding the pipe at a right angle to the structure it is fastened to. Typical use is picking up a horizontal run off a wall, beam or trapezoidal deck rather than dropping rod from the slab. Thomas & Betts lists the RA under hangers for trapezoidal ceiling.
6) Does the Thomas & Betts RA conduit support come with mounting hardware or anchors?
The RA is the support casting itself, sold individually. Fasteners are chosen to suit the structure you are landing it on, so order your own anchors, bolts or self-drilling screws for concrete, steel or deck.
How fast can I get the Thomas & Betts RA 100 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Thomas & Betts RA 100 come with a warranty?
Absolutely. The Thomas & Betts RA 100 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Thomas & Betts RA 100?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Thomas & Betts RA 100 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.