You may also like
TRIMCO 1120 Cast Pitcher Grip
Trimco’s 1120 Cast Pitcher Grip are manufactured from bronze, brass, aluminum, or Cuverro Healthy Hardware® for durability and long life. These hospital grips have a modern, simple and clean design. They are ADA compliant, and are available with a back-to-back mounting option.
TRIMCO STYLE GRIPS OVERVIEW
Trimco’s Style Grips are a great way to dress up a door to compliment any building design. Manufactured from stainless steel, bronze or brass for durability and long life, these pulls are available in various designs from elegant and detailed to modern, simple and clean. ADA compliant and multiple mounting methods are also available.
PRODUCT FEATURES
- Manufactured from stainless steel, bronze or brass for durability and long life.
- Mulitple elegant and simple styles available to compliment any building design.
- ADA compliant and various mounting methods including back-to-back available.
- Available in most architectural finishes.
FUNCTIONS/OPTIONS
- 1117-1 5" CTC, Traditional Cast Grip
- 1120 6" CTC, Cast Pitcher Grip
- 1134 6" CTC, Cast Designer Hospital Grip
- 1134B 4-7/8" CTC, Cast Designer Hospital Grip, BTB Pair
- 1136-1 6-1/4" CTC, Cast Modern Grip
- 1136G 6-1/4" CTC, Cast Modern Grip, BTB Pair
- 1139-1 6" CTC Bar Pull
- 1139-2 8" CTC Bar Pull
- 1147 10" CTC Pull
- 1147B 10" CTC Pull, Pair
- 1183-1 5" CTC Pull
APPLICATIONS
- Public Buildings & Facilities
- Commercial & Industrial Buildings
- Government & Military Facilities
- Hospitality
- Multifamily & Mixed-Use
DOWNLOADS & RESOURCES
Manufacturer Resources
Product Specs
- Series:
- 1120 Series
- ADA Compliant:
- Yes
- Clearance:
- 1-7/8"
- Product Group:
- Door Trim and Accessories
- Product Subgroup:
- Door Pulls, Push and Pull Plates
- Product Type:
- Door Pulls
- Subcategory:
- Door Pulls, Push and Pull Plates
- Duty Level:
- Heavy Duty
- Commercial/Residential:
- Commercial
- (CTC) Center-to-Center:
- 6"
- Product Projection:
- 2-1/2"
- Product Category:
- Door Trim and Accessories
- Product Substrate:
- Stainless Steel, Bronze or Brass
- Department:
- Door Hardware
Trimco TRI-1120.626 – Frequently Asked Questions
1) How much clearance does the Trimco 1120 pitcher grip pull give behind the handle for a gloved hand?
The 1120 cast pitcher grip gives 1-7/8 inches of clearance between the grip and the door face, with a total projection of 2-1/2 inches off the door. That clearance is enough for a gloved or full hand, which is what makes it work as a hospital-style grip on patient room and service doors. If your opening is in a corridor where a projecting pull is a problem, the 2-1/2 inch projection is the number to check against your clear width.
2) Will a Trimco 1120 pull cover the existing holes if I'm replacing a 6 inch center-to-center pull?
The 1120 is a 6 inch center-to-center grip, so it lands on the same two mounting holes as any other 6 inch CTC pull. Center-to-center is the only hole dimension that matters on a two-post grip, so a straight swap works if the pull coming off measures 6 inches between fastener centers. If the old one measures 5 inches, look at the Trimco 1117-1; at 6-1/4 inches, the 1136-1 cast modern grip.
3) I need a little more hand clearance than the Trimco 1120 gives. What else works?
The Trimco 1120 cast pitcher grip has 1-7/8 inch clearance behind the grip. The Ives 8102HD is a heavy duty straight door pull built on a 3/4 inch round bar with 1-1/2 inch clearance, so it sits tighter to the door, not looser. If gloved hands are the concern, the 1120's 1-7/8 inch clearance is the larger of the two, and both carry a heavy duty rating.
4) Is the Deltana OHP620 a substitute for the Trimco 1120 pitcher grip?
They serve different doors. The Deltana OHP620 is an off-set handle pull sold as a back-to-back set for doors 1-1/8 inch to 1-3/8 inch thick, which is residential-weight door stock. The Trimco 1120 cast pitcher grip is a commercial pull in stainless steel, bronze or brass with heavy duty rating. On a commercial opening, the 1120 is the one to specify; on a thin interior door where a matched pull is wanted on both faces, the OHP620 is the fit.
5) The architect specified a long ladder pull for a glass or entry door. Does the Trimco 1120 work, or do I need something else?
The Trimco 1120 cast pitcher grip is a 6 inch center-to-center grip - a hand-sized pull, not a full-height ladder pull. For a long pull, the Deltana SSP1210 is a 12 inch contemporary pull for a single side, and the Deltana SSPOBB24 is a 24 inch back-to-back modern offset set. Those cover the long-pull look; the 1120 covers the compact grip.
6) Can I get the Trimco 1120 grip mounted back-to-back on both sides of the door?
A back-to-back mounting option is offered on the 1120 cast pitcher grip, so you can run a grip on each face of the door. If you want a pull that ships as a matched back-to-back pair out of the box, Trimco's 1134B is a 4-7/8 inch CTC cast designer hospital grip sold as a BTB pair, and the 1136G is the 6-1/4 inch CTC modern grip in a BTB pair.
7) What is the Trimco 1120 pull made of, and which one holds up in a hospital or high-traffic corridor?
Cast stainless steel, bronze or brass, and it's rated heavy duty for commercial use rather than residential. On a high-cycle opening, cast metal grips beat tubular pulls because there's no hollow tube to dent. Trimco also offers this grip in Cuverro Healthy Hardware, an antimicrobial copper alloy, which is the version specified for patient care and food service areas.
8) Should I use a short grip pull like the Trimco 1120 or a long offset pull on my entrance door?
A grip is for a door someone opens with one hand at a normal height, a patient room, restroom, office, or service door. At 6 inches center-to-center it gives a single hand position and nothing more. A long offset pull is what you want on a glass or aluminum storefront entrance where users approach at different heights and you need a visual pull bar, and for that the Deltana SSPOBB24 is a 24 inch back-to-back modern offset pull. For a mid-length option, the Deltana SSP1210 is a 12 inch single-side contemporary pull.
9) What else could I use instead of the Trimco 1120 if I want a plain round bar pull rather than a cast grip?
For a straight round bar in place of the cast pitcher shape, the Ives 8102HD is a heavy duty straight pull with a 3/4 inch round bar and 1-1/2 inch clearance, and the Ives 8103HD is the same idea in 1 inch round with through-bolt mounting. Note the 8102HD gives 1-1/2 inches of clearance against the 1120's 1-7/8 inches, so if hand clearance is the reason you're buying, the cast grip gives you more of it. For an offset bar, the Ives 8169 is a C style offset in 1 inch diameter.
10) What looks like an alternative to the Trimco 1120 but will not do the same job?
The Cal-Royal PUL-175 is a night latch cylinder pull, 3-1/2 inch height, in stainless steel. It is filed with door pulls and mounts on the door face, but it is built to carry a rim cylinder for a night latch, not to serve as a general grip on a swinging commercial door. The Trimco 1120 cast pitcher grip is a plain heavy duty ADA compliant grip with no cylinder provision, so the two are not swappable in either direction.
11) What is the simpler bar-style alternative to the Trimco 1120 cast pitcher grip for a back of house door?
The Ives 8103HD is a heavy duty straight door pull in 1 inch round stock with through bolt mounting, and the ABH AB7200 is a solid stainless steel flat end pull handle in 7/8 inch diameter, also through-bolt mounted. Both are plain straight bars. The Trimco 1120 is a cast pitcher grip with a 2-1/2 inch projection and a shaped grip; where appearance is not driving the choice, either straight pull covers the same pulling duty.
12) I have an existing offset pull on the door and want to keep that shape. What replaces the Trimco 1120 with a round end offset?
The ABH AB3330 is an offset round end pull offered with custom length options, and the ABH AB3310 is an offset flat end pull for surface mount. The Ives 8169 is a C style offset solid pull in 1 inch diameter with heavy duty mounting. The Trimco 1120 cast pitcher grip is a fixed 6 inch center-to-center cast grip, so where the existing hole pattern has to be matched exactly, the AB3330's custom length is the one that lets you set the centers.
13) What finishes does the Trimco 1120 cast pitcher grip come in?
Seven finishes: 605 bright brass, 606 satin brass, 613 oil rubbed bronze, 613E dark oxidized satin bronze, 622 matte black, 625 bright chrome, and 626 satin chrome. If you're matching existing hardware across a building, 626 satin chrome and 613 oil rubbed bronze are the two that pair with the bulk of commercial lever and closer finishes. Order by the BHMA number, not the name, since finish names vary between manufacturers and the number does not.
14) Does the Trimco 1120 pull have a handing, or does one part work on left and right hand doors?
The 1120 cast pitcher grip is symmetrical about its two mounting posts, so there's no left or right hand version to specify. Order the finish and you're done. Some decorative pulls do hand, the Emtek Art Nouveau 8 inch cast bronze pull is ordered by handing, so it's worth checking when you cross-shop.
15) Can I standardize a facility on one pull if some doors need a grip and some need a straight bar?
The Trimco 1120 cast pitcher grip is a commercial, heavy duty, ADA compliant pull on 6 inch centers, available in 605 bright brass, 606 satin brass, 613 oil rubbed bronze, 613E dark oxidized satin bronze, 622 matte black, 625 bright chrome and 626 satin chrome. For the straight-bar doors, the ABH AB3300 is a straight flat end pull handle in 1.00 inch diameter for commercial doors. Running the 1120 on the grip doors and the AB3300 on the bar doors keeps two part numbers rather than one, so match the finish call across both.
16) Which pull do I use when both faces of the door need a matching grip instead of the Trimco 1120 single side?
For matched pulls on both faces, the Deltana SSPORBB24 is a 24 inch back-to-back round offset set and the Deltana SSPOBB24 is a 24 inch back-to-back modern offset set. The Trimco 1120 cast pitcher grip is a 6 inch center-to-center grip, so the back-to-back Deltana sets change both the length and the look of the opening rather than mirroring the 1120.
17) Is an Emtek Baden or Brisbane pull the same thing as the Trimco 1120?
No. The Emtek Baden and Emtek Brisbane are both 8 inch door pulls in Emtek's residential-styled series, while the Trimco 1120 cast pitcher grip is a commercial heavy duty pull on 6 inch centers in stainless steel, bronze or brass. The centers differ by two inches, so neither Emtek pull drops onto 1120 holes.
How fast can I get the Trimco TRI-1120.626 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Trimco TRI-1120.626 come with a warranty?
Absolutely. The Trimco TRI-1120.626 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Trimco TRI-1120.626?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Trimco TRI-1120.626 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.