You may also like
1260WP SERIES STOPS OVERVIEW
The 1260 Series stops and holders with options for floor and wall mountings offer the utmost in flexibility for most any application. The optional pipe mounted strike is especially effective where paving or steps fall away from the exit door.
FEATURES & BENEFITS
- 1260 Series stops and holders offer the utmost in flexibility.
- 1260WP Strike/Holder combination is especially effective where paving or steps fall away from exit door. The pipe can be extended to any length (not practical over 2 feet) to catch and hold a door in the open position.
- Most practical in schools, public buildings and factories.
- 12" long pipe can be supplied upon request.
APPLICATIONS
- Schools
- Public Buildings & Facilities
- Commercial & Industrial Buildings
- Government & Military Facilities
- Retail & Strip Malls
DOWNLOADS & RESOURCES
Manufacturer Resources
Product Specs
- Series:
- 1260 Series
- Fasteners:
- Wood and Machine Screws
- Product Group:
- Door Trim and Accessories
- Product Subgroup:
- Door Stops, Holders, Silencers & Bumpers
- Product Type:
- Baseboard And Wall Stops
- Subcategory:
- Door Stops, Holders, Silencers & Bumpers
- ANSI/BHMA:
- L01301
- Commercial/Residential:
- Commercial
- Product Category:
- Door Trim and Accessories
- Department:
- Door Hardware
Trimco TRI-1260WP.626 – Frequently Asked Questions
1) What is the pipe adapter strike on the Trimco 1260WP actually for?
The pipe adapter strike solves the case where the ground falls away from the door: paving, a stoop, or steps that drop off so a normal floor stop or holder has nothing to land on. The pipe raises the strike up to meet the door, and the wall stop and holder catches and holds the door open. Trimco notes the pipe can be extended to whatever length the opening needs, though it isn't practical beyond about 2 feet.
2) Do I need the pipe adapter version, or will a plain wall stop do the job?
If your door swings back to a wall or baseboard at normal height, a standard 1260 Series wall or floor stop is the simpler choice. Go to the WP pipe adapter strike only when the surface behind or below the door drops away, which is the typical exterior exit door onto paving or steps. The pipe is what bridges that gap so the door still has something to strike and be held against.
3) Will the 1260WP hold the door open, or is it only a bumper?
It does both. The 1260WP is a stop and holder combination, so it arrests the door at the end of its swing and catches it in the open position, which is what you want on an exit door you need propped during deliveries or class changes. The holder function is the reason it is designated L01301 rather than a plain stop.
4) Can I get the 1260WP with a longer pipe for a deep step-down at the door?
A 12 inch pipe can be supplied on request, and the pipe can be extended to any length you need, with roughly 2 feet being the practical ceiling. Past that the leverage on the mount stops being sensible. Measure from the mounting surface up to where the door edge needs to be caught and spec the pipe to that.
5) Does the Trimco 1260WP come with the screws, or do I need to buy fasteners separately?
Both wood and machine screws are supplied with it, so you can mount to a wood substrate or into a tapped metal or anchored condition without sourcing fasteners separately. Trimco publishes mounting templates for the 1260 Series, including the 1260P pipe template, so you can lay out the holes before drilling.
6) Is the 1260WP rated for a school or other high-traffic public building?
It's a commercial-grade unit, and Trimco calls out schools, public buildings and factories as where the strike and holder combination makes the most sense, along with government and military facilities, retail and strip malls, and general commercial and industrial work. It carries the ANSI/BHMA L01301 designation for the stop and holder function.
7) I need to match existing hardware on the building. What finishes does the Trimco 1260WP wall stop and holder come in?
Seven finishes: 605 bright brass, 606 satin brass, 613 oil rubbed bronze, 613E dark oxidized satin bronze, 622 matte black, 625 bright chrome, and 626 satin chrome. If the rest of the openings are standard commercial satin chrome or satin brass trim, 626 and 606 are the usual matches.
How fast can I get the Trimco TRI-1260WP.626 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Trimco TRI-1260WP.626 come with a warranty?
Absolutely. The Trimco TRI-1260WP.626 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Trimco TRI-1260WP.626?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Trimco TRI-1260WP.626 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.