The 4016 is a swing arm door guard made from bronze or brass. The hinged bar allows the guard to be positioned 180° away from the door when not in use. Edge protector and spacers available.
4016 SERIES SWING ARM DOOR GUARD
FEATURES & BENEFITS
- Bronze or brass construction.
- Overall dimensions: 2-1/2″ x 5-1/8″
- Adhesive mounted edge protector available (1″ x 1/2″).
- Black nylon spacer available if any applied casing involved.
APPLICATIONS
- Commercial & Industrial Buildings
- Government & Military Facilities
- Hospitality
- Multifamily & Mixed-Use
- Office Buildings
DOWNLOADS & RESOURCES
Manufacturer Resources
Product Specs
- Series:
- 4016 Series
- ADA Compliant:
- Yes
- Product Group:
- Door Trim and Accessories
- Product Subgroup:
- Kick Plates, Door Armor and Protection Plates
- Product Type:
- Crash Chains & Door Guards
- Subcategory:
- Kick Plates, Door Armor and Protection Plates
- Commercial/Residential:
- Commercial
- Product Category:
- Door Trim and Accessories
- Product Substrate:
- Brass
- Department:
- Door Hardware
Trimco TRI-4016-ED.613 – Frequently Asked Questions
1) What is the Trimco 4016-ED and how does it mount to the door?
The 4016-ED is the adhesive-mounted edge protector that goes with the Trimco 4016 swing arm door guard. It is a small piece, 1 x 1/2 inches, and it sticks on with adhesive tape rather than screws, so there is no drilling into the door edge. Its job is to take the wear where the swing arm bar contacts the door edge, instead of letting the bar mark the door itself.
2) My door has applied casing around the frame. Will the 4016 door guard still work?
Applied casing is the case where you need the extra part. Trimco offers a black nylon spacer for the 4016 swing arm guard specifically for openings with applied casing, so the guard sits proud of the trim and the bar clears. Add the spacer to the order along with the guard and the edge protector; the protector alone does not solve a casing clearance problem.
3) Is the Trimco 4016 swing arm door guard ADA compliant for an apartment or hotel entry door?
Yes, the 4016 series is ADA compliant per Trimco, and it is a commercial-rated product rather than a residential one. That matters on multifamily, hospitality and government openings, where a night-latch style guard that cannot be operated with a closed fist or one hand will not pass. The swing arm design folds 180 degrees flat against the door when it is not engaged.
4) I am ordering Trimco 4016 door guards for a whole building. What else do I need on the order?
Three separate items make up the full assembly: the 4016 swing arm guard itself, the 4016-ED adhesive edge protector for the door edge, and the black nylon spacer if the openings have applied casing. None of them are bundled, so count each opening and order accordingly. Keep the finish code the same across all of them. Trimco publishes a mounting template and a cut sheet for the 4016, which is what your installers should be laying out from.
5) Do I need the edge protector if I am installing a Trimco 4016 swing arm door guard?
Not required to make the guard work, but it is the part that keeps the door edge from getting chewed up. The 4016 guard is a hinged bar that swings 180 degrees clear of the door when it is not in use, and the 1 x 1/2 inch adhesive edge protector sits where that bar lands. On a high-traffic opening, a hotel corridor or an apartment entry, it is cheap insurance for the door finish.
6) What finishes does the Trimco 4016-ED edge protector come in?
Seven finishes: 605 bright brass, 606 satin brass, 613 oil rubbed bronze, 613E dark oxidized satin bronze, 622 matte black, 625 bright chrome and 626 satin chrome. Order the protector in the same finish code as the 4016 guard on the door and the two read as one assembly. If you are standardizing a building, matching on the BHMA number rather than the finish name is the reliable way to keep repeat orders consistent.
7) What is the Trimco 4016 door guard made of, and will it hold up in a hotel corridor?
Solid bronze or brass, not plated steel or a die cast. The substrate on record is brass, and that is what lets Trimco offer it in bright and satin brass along with the oxidized bronze finishes, which are living finishes that develop over time. For hospitality, multifamily, office and government facilities, which is where Trimco lists this series, a cast brass or bronze guard is the durable choice over a stamped one.
8) How much space does the Trimco 4016 swing arm guard take up on the door face?
The guard body measures 2-1/2 x 5-1/8 inches overall. That is the footprint to check against anything already on the door face, a viewer escutcheon, a deadbolt rose or a mounted room number, before you lay out the mounting holes. The edge protector that pairs with it is much smaller at 1 x 1/2 inches and sits on the door edge rather than the face.
How fast can I get the Trimco TRI-4016-ED.613 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Trimco TRI-4016-ED.613 come with a warranty?
Absolutely. The Trimco TRI-4016-ED.613 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Trimco TRI-4016-ED.613?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Trimco TRI-4016-ED.613 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.