You may also like
KA038 SERIES ARMOR PLATES
Trimco’s Protection Plates are offered with many value-added standard features, as well as custom options to meet job specifications. Trimco’s Protection Plates are manufactured in the USA from stainless steel, bronze or brass and include pencil bevel on all four edges standard. Other options include heavy bevel, countersinking, UL labeling and custom cutouts. Multiple material options create an offering that is flexible for most any application. Damage resistant packaging separates fasteners and ensures Trimco’s Protection Plates arrive at the jobsite in good condition.
FEATURES & BENEFITS
- Manufactured in the United States.
- Heavy duty .050″ stainless steel, brass, bronze or aluminum material standard. Other materials including .038″, .062″, .125″ and custom options available.
- Pencil beveled on all four sides standard.
- Stretcher plates include heavy bevel and oval head screws standard.
- Damage resistant packaging separates fasteners and ensures product quality at the jobsite.
- Options include UL labeling, heavy bevel, countersinking and security screws.
- Custom cutouts, sizes and shapes available.
APPLICATIONS
- Commercial & Industrial Buildings
- Hospitality
- K-12 Schools
- Nurseries & Pre-Schools
- Office Buildings
- Retail & Strip Malls
DOWNLOADS & RESOURCES
Manufacturer Resources
Product Specs
- Series:
- KA Series
- ADA Compliant:
- Yes
- Product Group:
- Door Trim and Accessories
- Product Subgroup:
- Kick Plates, Door Armor and Protection Plates
- Product Type:
- Kick Plates
- Subcategory:
- Kick Plates, Door Armor and Protection Plates
- Commercial/Residential:
- Commercial
- Product Finish:
- 630 - Satin Stainless Steel
- Product Category:
- Door Trim and Accessories
- Product Substrate:
- Stainless Steel
- Department:
- Door Hardware
Trimco KA050-8X34.630 – Frequently Asked Questions
1) Should I order the Trimco kick plate with or without countersunk holes?
Every size in the KA050 range is offered both ways, so it comes down to the fastener and the look. Countersunk holes take flat head screws that sit flush with the face of the plate, which is what you want where carts, luggage or wheelchairs contact the door and a proud screw head snags. Without countersinking the plate ships for oval or round head screws that sit above the surface. On a school or hospital corridor door, order countersunk. Countersinking is one of the options Trimco calls out on the protection plate line, along with heavy bevel, security screws and UL labeling.
2) What is the closest equivalent to a Trimco KA050 kick plate in an 8 x 34 size?
The Delaney 8 x 34 anodized kick plate with screws covers the same 8-inch high by 34-inch wide opening and ships with its screws. The Trimco KA050 in 8 x 34 is stainless steel in a 630 satin stainless finish and can be ordered with or without countersunk holes. So the difference between them at that size is material and finish - anodized aluminum on the Delaney, stainless on the Trimco - plus the countersinking choice.
3) I need a shorter kick plate than 8 inches for a door with a low rail - what can I use instead of the KA050?
The Delaney 6 x 34 kick plate with screws is a 6-inch high plate on the same 34-inch width, which clears a rail or a vision light cutout that an 8-inch plate would run into. The Trimco KA050 starts at 8 x 34 and goes up through 10 x 34, 12 x 34, 16 x 34 and 34 x 34, so on a shallow bottom rail the 6-inch Delaney is the plate that fits.
4) What is a Trimco KA050 kick plate made of and what finish is it?
Stainless steel, in 630 satin stainless. The 050 in the series name is the gauge: .050 inch material, which is Trimco's heavy duty standard thickness for protection plates. Satin stainless is the finish that matches most commercial lever trim, push plates and pulls already hanging in a building, so it standardizes cleanly across a facility.
5) Will the edges of this kick plate be sharp where people kick the door?
No. Trimco pencil bevels all four edges as standard on the KA050, so there is no raw sheared edge on any side of the plate. If you want more, heavy bevel is one of the options on the line. Stretcher plates in the family come with heavy bevel and oval head screws as standard.
6) Will a Delaney kick plate match the stainless plates already on my other doors?
The Delaney kick plates come as a 6 x 34 with screws and an 8 x 34 anodized with screws. The Trimco KA050 is stainless steel in a 630 satin stainless finish, so on a building already standardized on satin stainless plates the KA050 is the one that carries that finish across the doors, and the Delaney anodized plate will read differently alongside it.
7) For a full-height armor plate on a high-traffic commercial door, is a Delaney kick plate a substitute for the Trimco KA050?
Not at the tall sizes. The Delaney plates are made in 6 x 34 and 8 x 34, which are kick-plate heights for the bottom of the door. The Trimco KA050 runs up to 34 x 34, which is the armor-plate height that covers the door from the bottom past the lock area, and it is a commercial stainless plate with pencil bevel on all four edges standard. If the specification calls for armor-plate coverage rather than a kick plate, the 34 x 34 KA050 is the one that reaches.
8) Are the mounting screws included with the Trimco KA050 kick plate?
Fasteners ship with the plate, packed separately from the plate itself so the screws cannot mar the finished face in transit. Trimco calls out damage resistant packaging that separates fasteners as a standard feature. If you are ordering the countersunk version, you are matching flat head screws to those holes; the non-countersunk version takes screws that sit on the surface.
9) Is the Trimco KA050 plate suitable for a school or hospital corridor door?
That is exactly the traffic it is built for. Trimco lists the protection plate line for commercial and industrial buildings, hospitality, K-12 schools, nurseries and pre-schools, office buildings, and retail and strip malls. The plate is rated commercial, .050 inch stainless, ADA compliant, and available up to a 34 inch height where carts and equipment are hitting the door rather than just feet.
10) Can I get a Trimco protection plate in brass or bronze instead of stainless?
The KA050 as stocked is stainless steel in 630 satin stainless. Trimco manufactures the protection plate line in stainless steel, brass, bronze and aluminum, and in other gauges besides .050: .038, .062 and .125 inch. So if you are matching existing bronze trim in a lobby, or need the heavier .125 material on an industrial opening, the material exists in the family; the stainless .050 is the standard configuration.
How fast can I get the Trimco KA050-8X34.630 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Trimco KA050-8X34.630 come with a warranty?
Absolutely. The Trimco KA050-8X34.630 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Trimco KA050-8X34.630?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Trimco KA050-8X34.630 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.