IDEAL Industries 35-075 Twist-...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$111.10
$54.11
IDEAL Industries 35-075 Twist-a-Nut™ Conduit Deburring Tool w/Square Tip

IDEAL Industries 35-075 Twist-a-Nut™ Conduit Deburring Tool w/Square Tip

(No reviews yet) Write a Review

Model: 35-075
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$111.10
$54.11
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
Twist-a-Nut™ Conduit Deburring Tool w/Square Tip

  • Features

    • Hooded tip tightens EMT fitting set screws without slipping
    • Deburrs inside and outside edges of 1/2 in., 3/4 in. and 1 in. thin wall conduit
    • Head can be used at low speed setting in drill or cordless screwdriver
    • Square tip “seats” much more quickly on fitting screws than slotted version
    • Head removes and is interchangeable with IDEAL 7-in-1 Twist-a-Nut™ Screwdriver shaft (#35-908)

Manufacturer Resources

Product Specs

Product Group:
Hand Tools
Department:
Electrical
Product Subgroup:
Tap Tools & Deburrers
Product Type:
Reamer & Deburrer

Ideal Industries 35-075 – Frequently Asked Questions

1) Does the 35-075 also drive EMT fitting set screws, or do I still need a separate screwdriver?
It drives them. The hooded tip holds EMT fitting set screws without slipping, so you ream the cut end and tighten the connector or coupling screws with the same tool. That is the point of the Twist-a-Nut design for an electrician working out of a pouch.
2) Is the head on the IDEAL 35-075 removable, and will it fit my existing Twist-a-Nut screwdriver?
Yes, the head comes off and is interchangeable with the shaft of the IDEAL 7-in-1 Twist-a-Nut screwdriver, part 35-908. If you already carry that screwdriver, you can swap this deburring head onto it instead of carrying a second handle.
3) Can I chuck the IDEAL 35-075 into a drill, or is it hand use only?
Both. The head is made to run in a drill or cordless screwdriver at a low speed setting, and it also works by hand. Keep the speed down; it is a deburring head, not a high-rpm cutter.
4) Square tip or slotted tip on a conduit deburring tool, which should I buy?
The 35-075 is the square tip version, and it seats on fitting screws much faster than the slotted version. If the set screws you work with are square recess, the square tip means fewer cam-outs and less fumbling overhead on a ladder. Slotted makes sense only if your fittings use slotted screws.
5) Will the IDEAL 35-075 work on rigid or IMC conduit, or PVC?
It is specified for thin wall conduit, meaning EMT, in 1/2, 3/4 and 1 inch. Heavier wall rigid and IMC and nonmetallic PVC are not what this head is rated for. For PVC work, the material and fittings are a different system entirely, such as ABB Carlon nonmetallic Schedule 40 products.
6) Is the ABB Carlon PV-Mold pole riser system an alternative to the IDEAL 35-075 deburring tool?
No. The IDEAL Industries 35-075 Twist-a-Nut is a hand tool: it deburrs the inside and outside edges of 1/2 in., 3/4 in. and 1 in. thin wall conduit, and its hooded square tip tightens EMT fitting set screws. The ABB Carlon PV-Mold is a nonmetallic Schedule 40 pole riser system, meaning it is installed raceway rather than a tool used to prepare conduit ends. The two are bought for different line items on the same job, not in place of one another.
7) If I need a powered option instead of turning the deburring head by hand, what works with the 35-075?
The 35-075 head can be run at a low speed setting in a drill or cordless screwdriver, so no separate powered deburrer is needed for 1/2 in., 3/4 in. and 1 in. thin wall conduit. The head also removes and is interchangeable with the IDEAL 7-in-1 Twist-a-Nut screwdriver shaft, part 35-908, if you would rather carry one handle for driving and deburring.
8) What is the difference between the square tip 35-075 and a slotted tip version?
The 35-075 uses a square tip, which seats on fitting screws more quickly than a slotted tip does, and the tip is hooded so it tightens EMT fitting set screws without slipping. Deburring capability is the same job either way - inside and outside edges of 1/2 in., 3/4 in. and 1 in. thin wall conduit - so the tip style is about how fast the driver end engages the set screw.
9) What is the exact part number to order for the IDEAL square tip conduit reamer?
Order IDEAL Industries 35-075, the Twist-a-Nut conduit deburring tool with square tip. It ships as a single model, so there is no finish or size choice to specify.
How fast can I get the Ideal Industries 35-075 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Ideal Industries 35-075 come with a warranty?
Absolutely. The Ideal Industries 35-075 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Ideal Industries 35-075?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Ideal Industries 35-075 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!