You may also like
IDEAL Industries 35-922 6-in-1 Twist-a-Nut™ Tapping Tool
Model: IDL-35-922
6-in-1 Twist-a-Nut™ Tapping Tool
Features
Reversible, high-carbon tap with three clearly marked thread sizes on each end
Handle is interchangeable with 7-in-1 Screwdriver (#35-908) and Conduit...
Ideal Industries
$96.66
$38.79
Twist-A-Nut™ Replacement Tap Shaft Assembly
Features
- Reversible, high-carbon tap with three clearly marked thread sizes on each end
- Handle is interchangeable with 7-in-1 Screwdriver (#35-908) and Conduit Deburrer (#35-083)
- Forms new threads, re-forms burred threads and cleans out obstructions
Manufacturer Resources
Product Specs
- Product Group:
- Power Tools & Accessories
- Department:
- Electrical
- Product Subgroup:
- Tool Replacement Parts
- Includes:
- 6-32, 8-32 & 10-32 on one tapping side and 10-24, 12-24 & 1/4-20 on other side
- parent sku:
- IDL-35-923
- Product Type:
- Replacement Assembly
Ideal Industries 35-923 – Frequently Asked Questions
1) What thread sizes does the IDEAL 35-923 Twist-A-Nut tap shaft cut?
Six sizes, three per end. One tapping side covers 6-32, 8-32 and 10-32; flip it over for 10-24, 12-24 and 1/4-20. The sizes are marked on the tap itself, so you are not guessing which end you are holding on a ladder.
2) Is the 35-923 a replacement shaft only, or does it come with a handle?
It's the tap shaft assembly, sold as the replacement component. The ordering number is 35-923. If you don't already have an IDEAL handle from the 7-in-1 Screwdriver (#35-908) or the Conduit Deburrer (#35-083), you'll need one to drive it.
3) Can I use this to clean up stripped device box screw holes instead of replacing the box?
That's the main use. The high-carbon tap forms new threads, re-forms burred or damaged threads, and clears obstructions out of the hole, so a buggered 6-32 or 8-32 mounting hole in a box or mud ring can be chased back to usable rather than swapped out.
4) Are 6-32 and 8-32 the thread sizes used on electrical device and box screws?
Yes, and they're both on the 35-923. 6-32 is the standard thread for receptacle and switch mounting screws and most device box screws, 8-32 shows up on cover plates and larger box hardware. The second tapping end picks up the heavier 10-24, 12-24 and 1/4-20 threads found on strut, hangers and panel hardware.
5) Is the tap reversible, or do I need two shafts to cover all six sizes?
One shaft covers all six. The tap is reversible, with three thread sizes on each end, so you pull it, flip it in the handle, and you're on the other set.
6) What is the tap made of, and will it hold up tapping steel boxes?
High-carbon steel. That's the material called out for the Twist-A-Nut tap, and it's what lets it form and re-form threads in sheet steel boxes and fittings rather than just chasing soft material.
How fast can I get the Ideal Industries 35-923 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Ideal Industries 35-923 come with a warranty?
Absolutely. The Ideal Industries 35-923 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Ideal Industries 35-923?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Ideal Industries 35-923 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.