You may also like
UNINS FLAGTERM, 12-10, No10, CU TIN
Manufacturer Resources
Product Specs
- Country Of Origin:
- United States (US)
- Product Subgroup:
- Flag Terminals
- Product Type:
- Non-Insulated Flag Terminal
- Standards:
- UL E9809
- Wire Size:
- 12-10 AWG
- Department:
- Electrical
- Product Group:
- Wire Termination
- Product Color:
- Metallic
- Product Material:
- Copper
Sta-Kon C10-10A – Frequently Asked Questions
1) What wire gauge does the Sta-Kon C10-10A flag terminal accept?
The C10-10A takes 12 to 10 AWG conductors. If you're running 14 AWG or smaller on the same panel, that wire falls outside this barrel's range and you'll need a different size terminal to get a proper crimp.
2) What stud size does the Sta-Kon C10-10A fit?
It's sized for a No. 10 stud or screw. That's the tongue hole, so it lands on a #10 terminal block screw, ground screw, or breaker lug stud without filing the hole out.
3) Is the Sta-Kon C10-10A insulated?
No. It's a bare, non-insulated flag terminal, so the crimp barrel and tongue are exposed metal. On live terminations in a crowded enclosure you'll want to sleeve the barrel with heat shrink or use an insulated flag terminal instead.
4) When should I use a flag terminal instead of a standard ring terminal?
A flag terminal puts the tongue at a right angle to the wire, so the conductor runs parallel to the mounting surface instead of straight into the screw. Use it where the enclosure is shallow or the stud sits close to a wall and a straight ring terminal would force a sharp bend in the wire. Where you have depth, a conventional ring terminal is the simpler choice.
5) Is the Sta-Kon C10-10A UL listed?
It carries UL file E9809. That's the reference an inspector or submittal package will want for the termination on a listed assembly.
6) What material is the Sta-Kon C10-10A made of, and will it work on aluminum conductors?
The body is tin plated copper, so it's intended for copper conductors. Don't land aluminum wire in it; aluminum needs a terminal rated AL or AL9CU. The tin plating is there to resist corrosion and keep contact resistance down over time.
7) Are Sta-Kon C10-10A terminals made in the USA?
Yes, country of origin is the United States, which matters if you're buying against a Buy American or domestic-content requirement on a government or institutional job.
How fast can I get the Sta-Kon C10-10A delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Sta-Kon C10-10A come with a warranty?
Absolutely. The Sta-Kon C10-10A is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Sta-Kon C10-10A?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Sta-Kon C10-10A from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.