You may also like
UNINSUL FERRULE 3/0AWG 1.26INCH
Manufacturer Resources
Product Specs
- Country Of Origin:
- Germany (DE)
- Product Subgroup:
- Ferrules
- Product Type:
- Non-Insulated Ferrule
- Wire Size:
- 3/0 AWG
- Department:
- Electrical
- Product Group:
- Wire Termination
Sta-Kon F9044 – Frequently Asked Questions
1) What wire size does the Sta-Kon F9044 ferrule take?
The F9044 is sized for 3/0 AWG conductor. One ferrule per conductor end, and the wire gauge has to match exactly, a 4/0 or 2/0 strand bundle will not crimp correctly in a 3/0 barrel.
2) Is the Sta-Kon F9044 ferrule insulated or bare?
Bare metal, no plastic collar. It is a non-insulated ferrule, so if the terminal block or enclosure needs strain relief or a colored insulating sleeve at the entry, you'll need an insulated ferrule instead of this one.
3) What is a ferrule like the Sta-Kon F9044 actually used for?
It is a crimp sleeve that goes over the stripped end of a stranded conductor so the strands stay bundled in a terminal. On 3/0 AWG feeder cable that matters, loose strands under a set screw back out and cause a loose connection. The ferrule gives the lug or terminal a solid pin to clamp on.
4) What is the barrel length on the Sta-Kon F9044?
1.26 inch. Check that against the depth of your terminal pocket, the crimped sleeve should seat fully inside the clamp without leaving bare strands exposed ahead of the terminal.
5) Do I need a special crimp tool for a 3/0 AWG ferrule?
Yes. A 3/0 AWG ferrule this size is outside the range of the small hand ferrule crimpers used for control wiring, it needs a heavy hydraulic or large mechanical crimper with a die sized for the barrel. Pliers or a general purpose terminal crimper will not form a sound joint on this cross section.
6) Where is the Sta-Kon F9044 ferrule made?
Germany. Useful if your project submittal or procurement rules require country of origin on electrical components.
7) Is the F9044 sold as one ferrule or a pack?
The F9044 is a single catalog item under one model code, so count what the job needs by conductor end, including spares for miscrimps. For a three phase plus neutral 3/0 feeder terminated both ends that's eight pieces before spares.
How fast can I get the Sta-Kon F9044 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Sta-Kon F9044 come with a warranty?
Absolutely. The Sta-Kon F9044 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Sta-Kon F9044?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Sta-Kon F9044 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.