WAC Lighting 12.63" Jedi LED W...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$180.00
$159.00
WAC Lighting Jedi LED Wall Sconce

WAC Lighting 12.63" Jedi LED Wall Sconce

(No reviews yet) Write a Review

Model: WAC-WS-51313
From the Jedi Collection
Selected Finish is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$180.00
$159.00
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

WAC Lighting 12.63" Jedi LED Wall Sconce

Clearly fascinating. A transparent tube of LED light providing dramatic illumination.
  • Features a slim vertical rod of light. With a NEW LED filament techonology, each LED filament lamp replaceable with quick connector
  • Jedi is damp location listed - can be used indoor or covered outdoor areas. Conversion plate included to accommodate 4in junction box.
  • Universal Input Voltage Driver (120V-240V-277V) concealed within the canopy. Custom CCT options available by special order.
  • Smooth and continuous dimming with an electronic low voltage (ELV) dimmer.

Manufacturer Resources:

Specification Sheet

Installation Guide

Manufacturer Resources

Product Specs

Bulb Base:
Integrated LED
Bulbs Included:
Yes
Collection:
Jedi
Dimmable:
ELV
Hardwired or Portable:
Hardwired
Lumens:
260
Product Type:
Wall Sconce
Shade/Glass Description:
Glass Diffuser
Warranty:
5 Years Functional, 2 Years Finish
Product Group:
Indoor Lighting
Product Subgroup:
Sconces
ADA Compliant:
No
Number of Bulbs:
1
Avg Rated Hours:
50000
Base Material:
Aluminum
Location Rating:
Damp
Brand Family:
WAC Standard
Backplate Length:
5"
Energy Star:
No
Title 20:
Yes
Subcategory:
Indoor Wall Lighting
Certification:
ETL, cETL, IP44
Glass Finish:
Glass Diffuser
Location Indoor/ Outdoor:
Indoor/Outdoor (Covered)
Shade Material:
Glass
Title 24 Compliant:
No
Bulb Type:
Integrated LED
Segment:
Lighting
Product Voltage:
120-240-277V
Beam Spread Angle:
Flood
Light Temperature:
3000K
Mounting Method:
Wall;Vertical;Up/Down
Product Style:
Modern
Product Height:
12.63"
Product Category:
Wall Lighting
Product Width:
5"
Product Wattage:
4.4W

WAC Lighting WAC-WS-51313 – Frequently Asked Questions

1) Can the WAC Jedi WS-51313 sconce be used outside on a covered porch?
Yes, within limits. The Jedi LED sconce is damp location listed and rated IP44, so it works indoors or in covered outdoor areas like a porch ceiling overhang, soffit, or breezeway. It is not a wet location fixture, so keep it out of spots with direct rain or spray.
2) Will the Jedi WS-51313 sconce mount to an existing 4 inch junction box?
Yes. A conversion plate is included with the Jedi sconce to accommodate a 4 inch junction box, so you can land it on standard existing rough-in without adding a plate. The backplate is 5 inches, which covers the box and the fixture is 5 inches wide overall.
3) What voltage does the WAC Jedi LED sconce run on, and can I use it in a 277V commercial building?
It takes 120V, 240V, or 277V on a universal input driver that sits concealed inside the canopy, so the same part number works on residential 120V and on 277V commercial lighting circuits. No separate remote driver or transformer to find room for.
4) What dimmer works with the WAC Jedi WS-51313?
Use an electronic low voltage (ELV) dimmer. The Jedi sconce dims smoothly and continuously on ELV; a standard incandescent/TRIAC wall dimmer is the wrong control and is the usual cause of flicker or drop-out complaints on this kind of LED fixture.
5) Does the WS-51313 sconce meet ADA requirements for a corridor or egress path?
No. The Jedi is not ADA compliant, so it should not be used in corridors or circulation paths where protruding-object limits apply. It projects as a vertical tube off a 5 inch backplate. For those locations specify an ADA-rated sconce instead and save this one for guest rooms, entries, and mirror flanks.
6) Is the WAC Jedi sconce California Title 24 compliant for a new residential job?
No. The Jedi is Title 20 listed but it is not Title 24 compliant, so it will not satisfy a California Title 24 residential lighting requirement on its own. It carries ETL and cETL listings for US and Canadian installation.
7) Is the Jedi LED sconce bright enough to be the only light in a hallway or bathroom?
Treat it as accent or layered light, not a primary source. The Jedi puts out 260 lumens at 4.4W in a warm 3000K with a flood distribution, which reads as a decorative vertical rod of light flanking a mirror or lining a corridor. For a bathroom vanity or a hall you would be relying on, pair them or add a ceiling fixture.
8) If an LED burns out on the Jedi sconce, does the whole fixture get replaced?
No. The Jedi uses LED filament lamps, and each filament lamp is replaceable via a quick connector, so a failure is a lamp swap rather than a fixture swap. Rated life is 50,000 hours. That matters for property managers and MRO buyers standardizing on a fixture they will have to maintain for years.
9) How big is the WAC Jedi wall sconce and can it be mounted upside down?
It measures 12.63 inches high by 5 inches wide, with a 5 inch backplate. It is a wall-mount fixture intended to run vertically and can be oriented up or down, so you can point the glass tube either direction to suit the elevation.
10) What finishes does the Jedi WS-51313 come in, and do I have to order lamps separately?
Two finishes: Aged Brass (WS-51313-AB) and Black (WS-51313-BK), both in 3000K. The housing is aluminum with a glass diffuser. The integrated LED is included, so nothing else is needed to light it beyond the wiring and an ELV dimmer if you want it dimmed.
11) Can I get the Jedi sconce in 2700K or 3500K instead of 3000K?
Stock configuration is 3000K in both Aged Brass and Black. Custom CCT options are available from WAC by special order, so a non-standard color temperature is a factory request rather than a shelf item.
12) Does the Jedi sconce need a plug or is it hardwired?
Hardwired only. There is no cord or plug, so it needs a supply from a junction box, and an electrician on the job. The driver is already in the canopy, so the connection is line voltage straight to the fixture.
How fast can I get the WAC Lighting WAC-WS-51313 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the WAC Lighting WAC-WS-51313 come with a warranty?
Absolutely. The WAC Lighting WAC-WS-51313 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the WAC Lighting WAC-WS-51313?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the WAC Lighting WAC-WS-51313 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!