WAC Lighting 2" Eero LED Swing Arm Wall Light
A rotating light and laterally adjusting arm for targeted and powerful task lighting. Energy efficient integrated LED's provide a long-lasting maintenance-free bright and even illumination. Rotatable arm and fixture adjust horizontally in both directions. Fixture can be tucked up against the wall of headboard.- Install on both or either sides of the bed.
- Rotatable arm and fixture adjust horizontally in both directions. Fixture can be tucked up against the wall of headboard.
- Convenient on/off switch with build in finger-tip touch dimmer.
- Integral driver with fingertip dimming included.
Manufacturer Resources:
Manufacturer Resources
Product Specs
- Bulb Base:
- Integrated LED
- Bulbs Included:
- Yes
- Collection:
- Eero
- Dimmable:
- Integral Dimmer
- Hardwired or Portable:
- Hardwired
- Lumens:
- 200
- Product Type:
- Reading Light
- Warranty:
- 5 Years Functional, 2 Years Finish
- Product Group:
- Indoor Lighting
- Product Subgroup:
- Display Lights
- ADA Compliant:
- No
- Number of Bulbs:
- 1
- Avg Rated Hours:
- 50000
- Base Material:
- Aluminum
- Location Rating:
- Damp
- Brand Family:
- WAC Standard
- Backplate Length:
- 4.75"
- Energy Star:
- No
- Title 20:
- Yes
- Subcategory:
- Indoor Wall Lighting
- Certification:
- ETL, cETL, IP44
- Location Indoor/ Outdoor:
- Indoor/Outdoor (Covered)
- Title 24 Compliant:
- No
- Bulb Type:
- Integrated LED
- Segment:
- Lighting
- Product Voltage:
- 120-240V
- Beam Spread Angle:
- Flood
- Light Temperature:
- 3000K
- Mounting Method:
- Wall;Down
- Product Style:
- Transitional
- Product Height:
- 7.88"
- Product Category:
- Wall Lighting
- Product Width:
- 2"
- Product Wattage:
- 9W
WAC Lighting WAC-BL-49018 – Frequently Asked Questions
1) Does the WAC Eero BL-49018 swing arm reading light need to be hardwired, or can it plug in?
The Eero BL-49018 is a hardwired fixture, so it needs a junction box behind the backplate. There is no cord or plug option. Plan the rough-in before the headboard wall is closed up, or you will be fishing wire later.
2) What voltage does the WAC Eero LED swing arm wall light run on?
It runs on 120-240V, which covers standard North American 120V residential and hotel circuits as well as 230/240V international work. The LED driver is integral to the fixture, so no remote transformer is required. Draw is 9W.
3) Do I need a wall dimmer or a separate switch for the Eero BL-49018 bedside light?
No. The fixture has its own on/off switch with a built-in fingertip touch dimmer and an integral driver, so each light is controlled at the fixture. That makes it practical for hotel and multi-family bedside installs where you do not want to run a switch leg to each side of the bed.
4) Can the Eero BL-49018 be used in a bathroom or a covered outdoor space?
It carries a Damp location rating and is IP44 rated, along with ETL and cETL listings. That covers bathrooms away from direct spray and covered exterior areas like a porch or balcony soffit. It is not rated for wet locations with direct water exposure.
5) Does the WAC Eero reading light meet California Title 24 or ADA requirements?
Title 20 compliant, but not Title 24 compliant and not ADA compliant. For a California project under Title 24 lighting requirements, or a corridor or common-area location where ADA projection limits apply, specify a different fixture.
6) How much space does the WAC Eero swing arm reading light take up on the wall?
The fixture body measures 7.88 inches high by 2 inches wide, with a 4.75 inch backplate. The arm and head rotate laterally in both directions and the head tucks back flat against the wall or headboard, so the projection when parked is minimal. Confirm your headboard height leaves the 4.75 inch plate fully on the wall.
7) Is the light output on the WAC Eero swing arm warm or cool, and is it bright enough to read by?
Output is 200 lumens at 3000K, a warm white, with a flood beam spread rather than a tight spot. That is a comfortable reading level at bedside distance without washing the whole room, and the fingertip dimmer takes it down for late-night use.
8) Can the bulb be replaced in the WAC Eero BL-49018, or is the LED permanent?
The LED is integrated, not a replaceable lamp, and it ships with the light source included. Rated life is 50,000 hours, so for a hospitality or multi-family property there is no relamping cycle to budget for, but end of life means replacing the fixture.
9) Can I install Eero swing arm lights on both sides of a bed, and does each one work independently?
Yes, they are intended for one or both sides of the bed. Each fixture carries its own switch and dimmer at the head, so one occupant can read while the other sleeps. Each still needs its own hardwired box at the mounting height you pick.
How fast can I get the WAC Lighting WAC-BL-49018 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the WAC Lighting WAC-BL-49018 come with a warranty?
Absolutely. The WAC Lighting WAC-BL-49018 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the WAC Lighting WAC-BL-49018?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the WAC Lighting WAC-BL-49018 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.