WAC Lighting 3.13" LED Horizon...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$74.00
$72.95
WAC Lighting LED Horizontal Scoop Step and Wall Light

WAC Lighting 3.13" LED Horizontal Scoop Step and Wall Light

(No reviews yet) Write a Review

Model: WAC-WL-LED110
From the WAC Landscape Collection
Selected Finish is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$74.00
$72.95
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

WAC Lighting 3.13" LED Horizontal Scoop Step and Wall Light

WAC Lighting Step and Wall Lights are designed to seamlessly blend into any architecture featuring a sleek interchangeable magnetic faceplate with no visible hardware. These luminaires offer enhanced energy efficient functionality and optimized light output to adequately illuminate stairs, walls and walkways with little or no glare. Light engine is IP66 sealed for both indoor and outdoor applications.

  • LED Horizontal Scoop Step and Wall Light 120V Amber
  • LED Horizontal Scoop Step and Wall Light 120V 3000K
  • Die-cast aluminum construction in multiple finishes. Marine grade rated stainless steel (SS finish lifetime warranty) is recommended for coastal environments. Magnetic faceplate installation with tamper proof non-visible hardware.
  • Available in 120V, or 277. Direct wiring for 120V or 277V, no driver necessary. CEC Title 24 Compliant in 120V.
  • Wet location rated to IP66 standards for indoor and outdoor installations, No UV or heat radiation. Brushed Nickel finishes are only for interior use.
  • Smooth and continuous ELV dimming to 10% with an Electronic Low Voltage dimmer.
  • Replaceable LED Module available in multiple color options (Blue, Red, Amber), Power Consumption: 3.5W, CRI: 90, 50,000 hours rated life.
  • Standards: ETL &c ETL Listed. Fits into 2” × 4” J-Box with minimum inside dimensions of 3"L × 2"W × 2"D.

Features

  • Delivered Lumens: 36lm
  • 3000K, Amber
  • CRI: 90
  • Power: 3.5W, 3W
  • Input: 120 VAC, 277 VAC, 50/60Hz
  • ELV Dimming: 100-10%
  • Rated Life: 50000 Hours
  • Construction: Die-cast corrosion resistant aluminum alloy
  • Louvered design offers shielded illumination
  • Magnetized design for easy installation and maintenance
  • Low profile, flush to wall aesthetics with no visible hardware

Manufacturer Resources:

Specification Sheet

Installation Guide

Manufacturer Resources

Product Specs

ADA Compliant:
Yes
Bulb Base:
Integrated LED
Bulb Shape:
LED Module
Bulbs Included:
Yes
Collection:
WAC Landscape
Dimmable:
ELV
Hardwired or Portable:
Hardwired
Lumens:
68
Number of Bulbs:
1
Product Type:
Step and Wall Light
Shade/Glass Description:
Amber Diffuser Lens
Warranty:
5 Years Functional, 2 Years Finish
Product Group:
Outdoor Lighting
Product Subgroup:
Step Lights
Avg Rated Hours:
50000
Base Material:
Die Cast Aluminum
Location Rating:
Wet
Brand Family:
WAC Landscape
Backplate Length:
5"
CEC Listed:
Yes
CRI:
90
Energy Star:
No
Subcategory:
Step and Wall Lighting
Certification:
ETL, cETL, IP66
Glass Finish:
Amber Diffuser Lens
Location Indoor/ Outdoor:
Indoor/Outdoor
Shade Material:
Glass
Title 24 Compliant:
Yes
Bulb Type:
LED
Segment:
Lighting
Product Voltage:
120V
Product Length:
5"
Light Temperature:
Amber
Mounting Method:
Wall; Any
Product Style:
Functional
Product Height:
1.75"
Product Category:
Landscape Lighting
Product Width:
3.13"
Product Wattage:
3.5W

WAC Lighting WAC-WL-LED110 – Frequently Asked Questions

1) Does the WAC WL-LED110 step light need an LED driver or transformer?
No driver, no transformer. The WL-LED110 is direct wired at line voltage, either 120V or 277V depending on which version you order, and it is a hardwired fixture. That's the practical difference from low voltage landscape step lights, which need a transformer run. On 120V it is CEC Title 24 compliant.
2) Can the WAC LED horizontal scoop step light be used outdoors and in wet areas?
Wet location rated and sealed to IP66, so it works on exterior stairs, walkways and walls as well as indoors. One caveat that catches people out: the Brushed Nickel finish is interior only. For exterior work order Black, Bronze or White on aluminum. Coastal installations are a different conversation again, since salt air is harder on painted aluminum than inland weather.
3) Does the WAC WL-LED110 step light meet ADA and Title 24?
ADA compliant and CEC listed, with Title 24 compliance on the 120V version. It is ETL and cETL listed, and IP66 sealed. For a school, healthcare or government job where the egress path has to clear both the accessibility projection limit and the California energy code, those are the two boxes it ticks, and the 1.75 inch height is what keeps it inside the ADA projection allowance.
4) What dimmer works with the WAC WL-LED110 step light?
An electronic low voltage (ELV) dimmer. The WL-LED110 dims smooth and continuous from 100 percent down to 10 percent on an ELV control. A standard incandescent/forward phase dimmer or a 0-10V control is the wrong device here, and pairing the wrong dimmer is the usual cause of flicker or drop-out on a run of these.
5) Is 36 lumens enough light for a stairwell or walkway?
The WL-LED110 is a shielded marker light, not a floodlight. Its louvered scoop throws a downward wash onto the tread or paving with little or no glare, and at 36 delivered lumens each you space them along the run rather than relying on one. For a stair, that usually means a fixture every few risers or at each landing. If you need to actually light an area rather than define its edge, this is the wrong fixture type and you want a wall pack or path light instead.
6) How do you service or change the lens on a WAC magnetic faceplate step light?
The faceplate is magnetic and interchangeable, so it pulls off by hand with no screws to back out and no visible hardware on the face. The LED module behind it is replaceable and comes in Blue, Red and Amber options, which is how you recolor an installed fixture without rewiring. For a property manager maintaining a run of these, that means a lamp change is a faceplate pull rather than a fixture swap.
7) What finish should I specify for a coastal or oceanfront building?
For salt air exposure, WAC recommends the marine grade stainless steel finish rather than the painted aluminum options. The WL-LED110 body itself is die-cast corrosion resistant aluminum alloy, which holds up fine inland, but a beachfront balcony or a boardwalk stair is where the stainless version earns its place. Brushed Nickel is not an outdoor finish at all.
8) Can I run the WAC WL-LED110 step lights on a 277V commercial circuit?
Yes. The fixture accepts 120 VAC or 277 VAC at 50/60Hz with direct wiring and no separate driver. On a commercial or multi-family job already distributing 277V, that saves you a step-down transformer for the egress lighting. Note the Title 24 compliance is stated for the 120V version, so if the job is in California on 277V, verify the energy code path separately.
9) How long do these WAC LED step lights last before they need relamping?
Rated life is 50,000 hours on the integrated LED module, with bulbs included. Run dusk to dawn at roughly 12 hours a day, that's over eleven years of service. When it does go, the module is replaceable behind the magnetic faceplate rather than the whole fixture, which matters when you have fifty of them down a corridor.
How fast can I get the WAC Lighting WAC-WL-LED110 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the WAC Lighting WAC-WL-LED110 come with a warranty?
Absolutely. The WAC Lighting WAC-WL-LED110 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the WAC Lighting WAC-WL-LED110?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the WAC Lighting WAC-WL-LED110 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!