WAC Lighting 5.5" Clare LED Wall Sconce

The Clare sconce carries a Damp location rating and an IP44 rating, so it's fine over a vanity, in a bathroom, or in a covered outdoor spot like a porch ceiling overhang. It is not rated for wet locations, so keep it out of a direct shower spray or uncovered exterior position.

No. It's an AC LED fixture, so it wires straight to line voltage over a standard junction box with no remote driver or transformer. It runs on 120V at 11W; a 277V version is available only by special order.

Use an electronic low voltage (ELV) dimmer. The integrated AC LED dims smoothly on ELV control; a standard forward-phase incandescent dimmer is not the specified control type and can cause flicker or drop-out.

Yes, the Clare is listed ADA compliant, which matters in corridors and public restrooms where wall-mounted fixtures must limit protrusion. It's also ETL and cETL listed for US and Canadian installs.

It measures 15.75 inches high by 5.5 inches wide, with a backplate 4.5 inches long and 4.25 inches in diameter. That backplate covers a standard round or octagonal wall box, but it will not hide a larger cut-in or an oversized old-work opening, so patch the wall if your existing fixture had a wider canopy.

Each Clare delivers 832 lumens at 3000K with a flood distribution from a single integrated LED. That warm-neutral white is the usual choice for residential and hospitality baths. One unit works beside a small mirror; a pair flanking a wider mirror is the normal approach for even face lighting, since a flood spread from both sides kills side shadows.

Three finishes: Aged Brass (WS-24016-AB), Brushed Nickel (WS-24016-BN), and Chrome (WS-24016-CH). Color temperature is fixed at 3000K across all three, so if you're standardizing a building on one color temperature, every Clare unit will match regardless of finish.

No. The LED is integrated and supplied with the fixture, rated 50,000 average hours, so there's no lamp to stock or re-lamp. At end of life the fixture itself is replaced, which is the tradeoff for the maintenance-free run time on high-traffic MRO work.

Yes on both. The Clare is Title 24 compliant and Title 20 listed, which is what California jobs need for a hardwired residential or commercial wall fixture. It is not Energy Star rated.

It's a wall-mount fixture with a 15.75 inch by 5.5 inch body on a round backplate, so the usual orientation is vertical alongside a mirror. For mounting-position detail and box orientation, the WAC installation guide for WS-24016 covers the hardware.

The body is aluminum with a mouth blown opal etched glass diffuser. Aluminum plus a damp-rated IP44 construction is what suits it to bathroom humidity; the etched opal glass is what spreads the single LED into even light rather than a hot spot.