You may also like
WAC Lighting 7.4" Disc LED Energy Star Flush Mount with Motion Sensor
I Can't Believe it's Not Recessed imitates a traditional 6in recessed downlight without the need for installing a housing. Multiple high-powered LED's illuminate an acrylic diffuser uniformly without socket shadows which are common in conventional ceiling lights. This multi-purpose Damp Location listed and Energy Star Rated ceiling light can be mounted without a transformer in a standard 4in junction box. ADA Compliant, CSA Listed, and CEC Title 24 Compliant.
- Disc 6in LED Energy Star Flush Mount with Motion Sensor for Junction Box 3000K in White
- Multiple high-powered LED's illuminate an acrylic diffuser uniformly without socket shadows which are common in conventional flush mounts. This multi-purpose Wet Location, Energy Star Rated flush mount can be mounted without a transformer on a ceiling or on a wall in a junction box. Built-in occupancy sensor can be activated to conserve energy and only turn on when there is motion detected in the space - makes for a great closet light.
- High quality aluminum construction with an opaque acrylic diffuser.
- Energy Star Rated, Wet Location Listed, CEC Title 24 Compliant, and ADA Compliant low profile design.
- Can be installed on a ceiling or on a wall in a junction box. Built-in occupancy sensor activates light automatically for 3-minutes when motion is detected.
- Smooth and continuous dimming with an electronic low voltage (ELV) dimmer. ACLED technology, no transformer or driver required.
- High Powered LED modules, 50,000 hours rated life, Color Temp: 3000K, CRI: 90.
- Standards: ETL & cETL IP65 Wet Location Listed.
Features
- Delivered Lumens: 1100lm
- 3000K
- CRI: 90
- Power: 14W
- Input: 120 VAC, 50/60Hz
- ELV Dimming: 100-5%
- Rated Life: 50000 Hours
- Construction: Die-cast aluminum with white acrylic diffuser
- Multiple LED array for uniform illumination
- Built-in occupancy sensor to conserve energy when the no motion is detected in the illuminated space
- ACLED driverless technology
- Can be mounted on ceiling or wall in all orientations
Manufacturer Resources:
Manufacturer Resources
Product Specs
- ADA Compliant:
- Yes
- Bulb Base:
- Integrated LED
- Bulb Shape:
- LED Module
- Bulbs Included:
- Yes
- Collection:
- Disc
- Dimmable:
- ELV
- Hardwired or Portable:
- Hardwired
- Lumens:
- 1110
- Number of Bulbs:
- 1
- Product Type:
- Flush Mount
- Shade/Glass Description:
- Opaque Acrylic Diffuser
- Warranty:
- 5 Years Functional, 2 Years Finish
- Product Group:
- Indoor Lighting
- Product Subgroup:
- Flush/Semi Flush
- Avg Rated Hours:
- 50000
- Base Material:
- Aluminum
- Location Rating:
- Wet
- Brand Family:
- WAC Limited
- Backplate Diameter:
- 7.39"
- Backplate Length:
- 7.39"
- CEC Listed:
- Yes
- CRI:
- 90
- Energy Star:
- Yes
- Subcategory:
- Indoor Ceiling Lighting
- Certification:
- ETL, cETL, IP65
- Glass Finish:
- Opaque Acrylic Diffuser
- Location Indoor/ Outdoor:
- Indoor/Outdoor
- Shade Material:
- Acrylic
- Title 24 Compliant:
- Yes
- Bulb Type:
- LED
- Segment:
- Lighting
- Product Voltage:
- 120V
- Product Length:
- 7.4"
- Light Temperature:
- 3000K
- Product Diameter:
- 7.39"
- Mounting Method:
- Ceiling/Wall;Any
- Product Style:
- Functional
- Product Height:
- 1.25"
- Product Category:
- Ceiling Lighting
- Product Width:
- 7.4"
- Product Wattage:
- 14W
WAC Lighting FM-306MS-930JB-WT – Frequently Asked Questions
1) Can the WAC Disc FM-306MS flush mount be installed without a recessed housing?
That is the point of it. The Disc 7.4 inch LED flush mount mounts directly to a standard junction box, no recessed can and no remote transformer or driver, because it runs on ACLED driverless technology at 120V. It gives you the look of a 6 inch recessed downlight on a ceiling where you cannot cut in a housing, like a concrete deck, a plenum-tight ceiling, or a retrofit over existing drywall.
2) How does the built-in occupancy sensor on the WAC Disc flush mount behave?
The sensor is integral to the fixture and switches the light on when it detects motion in the space, holding for a 3 minute period before dropping out. There is no separate wall sensor to wire. That behavior is what makes it useful for closets, storage rooms, stairwells, and back-of-house corridors where nobody remembers the switch.
3) Can this WAC Disc LED light be used in a shower, on a covered porch, or outdoors?
Yes. The FM-306MS carries a Wet location rating and is ETL and cETL listed to IP65, so it is suitable indoor or outdoor, including covered exterior ceilings and shower or soffit locations.
4) What dimmer do I need for the WAC FM-306MS, and how low will it go?
Use an electronic low voltage (ELV) dimmer. The fixture dims smoothly from 100 percent down to 5 percent on ELV. A standard incandescent/forward-phase or a 0-10V control is not the right match here, so spec ELV on the wall boxes that feed these.
5) Will the WAC Disc flush mount cover the hole left by an old 6 inch recessed trim?
The fixture is 7.39 inches in diameter with a matching 7.39 inch backplate, so it overlaps a nominal 6 inch recessed opening. Height is only 1.25 inches off the ceiling. Bear in mind it is designed to mount to a junction box rather than into a can, so the existing housing needs to be dealt with and a 4 inch J-box provided.
6) Does this WAC flush mount meet California Title 24 and ADA requirements?
Both. The FM-306MS is CEC listed and Title 24 compliant for California work, and its 1.25 inch profile meets ADA protrusion requirements when mounted on a wall. It is also Energy Star rated, which matters for utility rebate and green-build paperwork.
7) Can the Disc motion sensor fixture be mounted on a wall instead of a ceiling?
Yes, ceiling or wall, in any orientation, as long as it lands on a junction box. Wall mounting is common for closet and utility applications where the occupancy sensor picks up someone stepping into the space.
8) Are lamps included with the WAC FM-306MS, or do they ever need replacing?
Nothing to buy and nothing to relamp. The light source is an integrated LED module rated for 50,000 hours, sealed behind an opaque acrylic diffuser. For a property manager standardizing closet and corridor fixtures across a portfolio, that removes the lamp line item entirely.
9) What is the WAC Disc flush mount made of, and will it yellow over a wall pack style lens?
Housing is die-cast aluminum with a white finish, and the lens is an opaque white acrylic diffuser. The multiple-LED array behind that diffuser is what kills the socket shadow you get from a single-source ceiling fixture, so the face lights evenly across the full 7.39 inch diameter.
How fast can I get the WAC Lighting FM-306MS-930JB-WT delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the WAC Lighting FM-306MS-930JB-WT come with a warranty?
Absolutely. The WAC Lighting FM-306MS-930JB-WT is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the WAC Lighting FM-306MS-930JB-WT?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the WAC Lighting FM-306MS-930JB-WT from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.