WAC Lighting 15" Round LED Ene...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$156.00
$122.95

WAC Lighting 15" Round LED Energy Star Flush Mount

(No reviews yet) Write a Review

Model: WAC-FM-15RN
From the Round Collection
Selected Finish is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$156.00
$122.95
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks

WAC Lighting 15" Round LED Energy Star Flush Mount

Round and Square flush mounts have an ultra slim low profile with edge lit technology and a translucent diffuser for an even, uniform illumination without shadows or hotspots. 120V AC LED technology means there is no driver required - that's one less point of failure over traditional LED flush mounts and makes the round and square incredibly easy to install into just about any electrical box (pancake, 3/0, 4/0, 3/4 combination).
  • High quality aluminum construction with a translucent diffuser. Universal Box version fits in a 4/0 Junction Box or a 3/0-4/0 Junction Box.
  • Available in a round or square form factor. Four finish options and multiple size options. Energy Star Rated, CEC Title 24 Compliant, and ADA Compliant.
  • Easy to install over a pancake, 3in, 4in, or 3/0-4/0 hybrid junction box.
  • Smooth and continuous dimming with an electronic low voltage (ELV) or TRIAC dimmer.
  • High Powered LED modules: 50,000 hours rated life, Color Temp: 3000K or 3500K, CRI: 90.
  • Standards: ETL & cETL Damp Location Listed. CSA Listed (For use in closets), ADA Compliant, CEC Title 24 Compliant, and Energy Star Rated.

Manufacturer Resources:

Specification Sheet

Installation Guide

Manufacturer Resources

Product Specs

ADA Compliant:
Yes
Bulb Base:
Driver
Bulb Shape:
LED Module
Bulbs Included:
Yes
Collection:
Round
Dimmable:
ELV, TRIAC
Hardwired or Portable:
Hardwired
Lumens:
3188
Number of Bulbs:
1
Product Type:
Flush Mount
Shade/Glass Description:
Translucent Acrylic Diffuser
Warranty:
5 Years Functional, 2 Years Finish
Product Group:
Indoor Lighting
Product Subgroup:
Flush/Semi Flush
Avg Rated Hours:
50000
Base Material:
Aluminum
Location Rating:
Damp
Brand Family:
WAC Limited
Backplate Diameter:
15"
Backplate Length:
15"
Backplate Width:
15"
CEC Listed:
Yes
CRI:
90
Energy Star:
Yes
Wire Length:
6"
Subcategory:
Indoor Ceiling Lighting
Certification:
ETL, cETL
Glass Finish:
Translucent Acrylic Diffuser
Location Indoor/ Outdoor:
Indoor/Outdoor (Covered)
Shade Material:
Acrylic
Title 24 Compliant:
Yes
Bulb Type:
LED
Segment:
Lighting
Product Voltage:
120V
Product Length:
15"
Light Temperature:
3000K
Product Diameter:
15"
Mounting Method:
Ceiling/Wall;Any
Product Style:
Functional
Product Height:
0.6"
Product Category:
Ceiling Lighting
Product Width:
15"
Product Wattage:
28W

WAC Lighting WAC-FM-15RN – Frequently Asked Questions

1) Will the WAC FM-15RN dim on the switches I already have in the building?
It dims on electronic low voltage (ELV) or TRIAC dimmers, and those are the two types to spec. A standard incandescent TRIAC wall dimmer works. What will not work is a 0-10V dimmer or a low voltage magnetic dimmer, since the fixture is a 120V AC LED with no external driver to feed a control signal to.
2) Does the WAC FM-15RN meet California Title 24 and ADA for a multifamily job?
It carries Title 24 compliance, ADA compliance, and Energy Star rating, and it is CEC listed. The ADA piece follows from the profile: at 0.6 inches deep it projects nowhere near the 4 inch limit for a wall mounted fixture in a circulation path, and it is rated for ceiling or wall mounting. For a California rebate or permit set, the CEC listing and Energy Star rating are the two lines the inspector looks for.
3) How much light does the 15 inch WAC round flush mount put out, and what room size does it cover?
3188 lumens from a 28W LED module, with a CRI of 90. That output suits a bedroom, a mid size hallway, a laundry room, or a small to mid size living space as the single ceiling source. The 90 CRI matters in units where color accuracy is noticed, like kitchens, bathrooms and hospitality corridors. Rated life is 50,000 hours and the LED module is integral, so there is no lamp to restock or relamp.
4) Should I order 3000K or 3500K for the WAC 15 inch flush mount?
3000K is the warmer of the two and is what most residential and multifamily interiors get specified at, so it matches existing warm white cans and undercabinet runs in an apartment or hotel room. 3500K reads slightly cleaner and is the usual pick for corridors, back of house, offices and commercial common areas. Both are the same 3188 lumen, 28W, 90 CRI module. If you are mixing with existing fixtures in a building, match whatever is already there, because the difference between the two is visible side by side.
5) Is the WAC 15 inch round flush mount actually a fixture or just a trim over a can light?
It's a complete fixture, not a trim. Hardwired, with the LED module built in and 6 inches of wire at the fixture for splicing, it mounts directly to a junction box. It does not go into a recessed housing and there is no can involved. Body is aluminum with a translucent acrylic diffuser, edge lit so the face reads evenly instead of showing a bright spot over the module.
6) What is the actual ceiling opening and footprint of the WAC FM-15RN, and how far does it drop?
The fixture is 15 inches in diameter and drops 0.6 inches off the ceiling. The backplate is the same 15 inches, so it will cover a 4 inch box, a 3/0-4/0 hybrid, or a pancake box with room to spare. There is no ceiling cut required beyond the box itself. The half inch profile is what makes it usable in low ceiling basements, closets, and any spot where a semi flush would be in the way.
7) Can the WAC FM-15RN be mounted on a wall instead of a ceiling?
Yes, it is rated for ceiling or wall mounting in any orientation. On a wall it works as a sconce over a junction box, and its 0.6 inch projection keeps it ADA compliant in a corridor or stairwell where a deeper fixture would not be. The damp rating also covers a wall position in a bathroom.
8) What happens when the LED goes out on the WAC FM-15RN, since there's no bulb to change?
The LED module is integral and there's no lamp to replace, so the fixture is a unit replacement at end of life. That is 50,000 rated hours, which at 6 hours a day is well over 20 years. The tradeoff cuts the other way too: because it's 120V AC LED with no external driver, there's no driver to fail or swap, which is the component that usually goes first on a conventional LED flush mount. For a facility standardizing across a lot of units, plan on holding a spare fixture rather than spare lamps or drivers.
How fast can I get the WAC Lighting WAC-FM-15RN delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the WAC Lighting WAC-FM-15RN come with a warranty?
Absolutely. The WAC Lighting WAC-FM-15RN is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the WAC Lighting WAC-FM-15RN?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the WAC Lighting WAC-FM-15RN from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.