WAC Lighting Estrella LED 6.5in Indoor or Outdoor 12V Wall Cylinder
A state-of-the-art LED 12V cylinder light made for challenging installations where 120V connections are not available. The Estrella Cylinder wall light can conveniently adapt to an existing 12V landscape lighting system, making it the perfect solution for outdoor applications including pergolas and cabanas. Two mechanical dials located at the side of the cylinder feature color temperature adjustability from 2700K warm to 3000K warm white to 4000K cool white with smooth and continuous integral brightness control. Remove the cap to reveal a dial that provides continuously adjustable beam angles from flood to spot for each light which can be adjusted independently. One sku fits most applications, eliminating the need to choose from dozens of light bulbs with varying light outputs when compared with traditional landscape lights. Factory sealed and water tight with an IP66 rating for protection against high-pressure water jets and outdoor elements. Casted using a special k-alloy aluminum that is engineered to withstand corrosive elements for use in coastal or marine environments. light includes 10ft of low voltage burial cable and direct burial gel filled wire nuts. 12V Magnetic or Electronic Power supply is required.- Casted using a special k-alloy aluminum that is engineered to withstand the most challenging environments over time with enhanced protection against corrosive elements and is recommended for use in coastal or marine environments.
- Factory sealed water tight and IP66 rated for protection against high-pressure water jets and outdoor elements.
- Two mechanical dials located at the side of the cylinder feature color temperature adjustability from 2700K warm to 3000K warm white to 4000K cool white with smooth and continuous integral brightness control. Remove the cap to reveal a dial that provides continuously adjustable beam angles from flood to spot for each light which can be adjusted independently.
- Magnetic or Electronic 12V power supply is required. Recommended power supply WAC Landscape Lighting Stainless Steel outdoor transformer: (75W) 9075-TRN-SS, (150W) 9150-TRN-SS, (300W) 9300-TRN-SS, (600W) 9600-TRN-SS.
- High Powered LED, Input: 9-15V AC, Power: 7.5W (13VA), Brightness: up to 650Lm, CRI: 85, Rated Hours: 50,000. Smooth and continuous dimming to 10% with a Magnetic Low Voltage Dimmer.
- Standards: UL & cUL 1838 and IP66 Rated for Wet Locations (See Specification Sheet for complete details).
Manufacturer Resources:
Manufacturer Resources
Product Specs
- ADA Compliant:
- Yes
- Bulb Base:
- Integrated LED
- Bulbs Included:
- Yes
- Collection:
- Estrella
- Dimmable:
- MLV
- Lumens:
- 370
- Number of Bulbs:
- 2
- Product Type:
- Wall Light
- Shade/Glass Description:
- Frosted Glass Lens
- Warranty:
- 10 Years Functional, 2 Years Finish
- Product Group:
- Outdoor Lighting
- Product Subgroup:
- Wall Lights
- Hardwired or Portable:
- Hardwired
- Avg Rated Hours:
- 50000
- Base Material:
- Aluminum
- Location Rating:
- Wet
- Brand Family:
- WAC Landscape
- Energy Star:
- No
- Wire Length:
- 6"
- Subcategory:
- Landscape Wall Lighting
- Certification:
- UL, cUL, IP66
- Glass Finish:
- Frosted Glass Lens
- Location Indoor/ Outdoor:
- Indoor/Outdoor
- Reversible Mounting:
- Yes
- Shade Material:
- Glass
- Title 24 Compliant:
- Yes
- Bulb Type:
- LED
- Segment:
- Lighting
- Product Voltage:
- 12V
- Product Length:
- 2.42"
- Light Temperature:
- 2700K-3000K-4000K
- Product Diameter:
- 1.88"
- Product Style:
- Contemporary
- Product Height:
- 6.38"
- Product Category:
- Landscape Lighting
- Product Width:
- 1.88"
- Product Wattage:
- 7.5W
WAC Lighting WAC-3611 – Frequently Asked Questions
1) Can I wire the WAC Estrella 3611 wall cylinder to a 120V junction box?
No. The Estrella cylinder is a 12V fixture and needs a magnetic or electronic 12V power supply ahead of it. It accepts 9-15V AC input and draws 7.5W (13VA). WAC's stainless steel landscape transformers are the recommended feed: 9075-TRN-SS (75W), 9150-TRN-SS (150W), 9300-TRN-SS (300W), or 9600-TRN-SS (600W). That low-voltage requirement is the whole point of the fixture, it goes where no 120V connection exists, like a pergola or cabana ceiling.
2) Will the Estrella 12V cylinder survive on an oceanfront property?
It is cast from a k-alloy aluminum specifically intended for corrosive environments, and WAC recommends it for coastal and marine use. The housing is factory sealed and IP66 rated against high-pressure water jets, with a wet location rating and UL/cUL listing. For a property manager standardizing on salt-air buildings, that combination is the reason to pick this over a standard painted-aluminum landscape fixture.
3) Do I have to order a separate part number for 2700K versus 4000K on the Estrella cylinder?
No, and that is the ordering advantage here. One part number covers all three color temperatures. Two mechanical dials on the side of the cylinder step it from 2700K warm to 3000K warm white to 4000K cool white, with continuous brightness control on the same dial set. You only choose a finish: black (3611-27/30/40BK), bronze (3611-27/30/40BZ), or white (3611-27/30/40WT).
4) What dimmer works with the WAC Estrella 12V cylinder?
Use a magnetic low voltage (MLV) dimmer on the line side of the transformer. With an MLV dimmer the Estrella dims smoothly and continuously down to 10 percent. It is not rated for ELV or standard incandescent-only dimming, so specify MLV when you spec the control. There is also mechanical brightness control on the fixture itself if you just want to trim output at commissioning.
5) What comes in the box with the Estrella 3611 cylinder, and what do I still have to buy?
You get the complete fixture with the factory-sealed LED already in it, a hardware pack, two Ideal direct burial wire nuts, and 10 feet of low voltage burial cable. The lens is frosted glass. What is not included is the 12V supply, a magnetic or electronic transformer is required, and an MLV dimmer if you want to dim it.
6) How much room do I need to mount a WAC Estrella 6.5in cylinder wall light?
It is a small fixture: 6.38 inches high, 1.88 inches in diameter, and 2.42 inches in length. Wire length off the fixture is 6 inches, and it ships with 10 feet of low voltage burial cable plus direct burial gel-filled wire nuts, so you have run length to reach the nearest splice point. Mounting is reversible, so it can be aimed up or down on the same surface.
7) Can I change the beam spread on the Estrella cylinder after it is installed?
Yes. Pull the cap off and there is a dial that adjusts the beam continuously from flood to spot. The fixture carries two LED emitters and each one adjusts independently, so you can run one tight and one wide off a single cylinder. That is what lets a single SKU cover applications where a traditional landscape line would need several different lamps.
8) How many Estrella cylinders can I put on one WAC landscape transformer?
Each fixture draws 7.5W, listed at 13VA. Size the transformer on the VA figure plus your normal headroom for cable loss: a 75W 9075-TRN-SS covers a handful, while the 600W 9600-TRN-SS handles a large run. The available WAC stainless steel supplies are 75W, 150W, 300W, and 600W. Input range on the fixture is 9-15V AC, which gives you some tolerance for voltage drop at the end of a long run.
9) Is the Estrella cylinder approved for use indoors as well as outdoors?
Yes, it is rated for indoor or outdoor use and carries a wet location rating, so covered porches, soffits, showers areas of a pool house, and open exterior walls are all in scope. Certification is UL and cUL with IP66. It is a hardwired fixture, not a plug-in, so it needs a permanent 12V connection either way.
10) Does the WAC Estrella wall cylinder meet Title 24 and ADA requirements?
Both are listed as yes. It is Title 24 compliant and ADA compliant, which matters on California work and on any commercial corridor or path-of-travel where projection from the wall is regulated. It is not Energy Star rated. The LED is integrated and factory sealed with a rated life of 50,000 hours, so there is no relamping program to plan for.
11) How bright is the Estrella 12V cylinder, and will it light a walkway wall?
Output runs up to 650 lumens at the widest setting, with 370 lumens listed as the nominal figure, and CRI is 85. That is accent-level light, right for grazing a wall, marking a path edge, or lighting a pergola post, not for general area illumination. If you need to cover ground, plan on multiple cylinders on the run rather than expecting one to do the work of a flood.
How fast can I get the WAC Lighting WAC-3611 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the WAC Lighting WAC-3611 come with a warranty?
Absolutely. The WAC Lighting WAC-3611 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the WAC Lighting WAC-3611?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the WAC Lighting WAC-3611 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.