WAC Lighting 3.88" Estrella LED Indoor or Outdoor 12V Monopoint
A state-of-the-art LED 12V monopoint light made for challenging installations where 120V connections are not available. The Estrella monopoint light can conveniently adapt to an existing 12V landscape lighting system, making it the perfect solution for outdoor applications including pergolas and cabanas. Two mechanical dials located at the side of the cylinder feature color temperature adjustability from 2700K warm to 3000K warm white to 4000K cool white with smooth and continuous integral brightness control. Remove the cap to reveal a dial that provides continuously adjustable beam angles from flood to spot for each light which can be adjusted independently. One sku fits most applications, eliminating the need to choose from dozens of light bulbs with varying light outputs when compared with traditional landscape lights. Factory sealed and water tight with an IP66 rating for protection against high-pressure water jets and outdoor elements. Casted using a special k-alloy aluminum that is engineered to withstand corrosive elements for use in coastal or marine environments. light includes 10ft of low voltage burial cable and direct burial gel filled wire nuts. 12V Magnetic or Electronic Power supply is required.- Casted using a special k-alloy aluminum that is engineered to withstand the most challenging environments over time with enhanced protection against corrosive elements and is recommended for use in coastal or marine environments.
- Factory sealed water tight and IP66 rated for protection against high-pressure water jets and outdoor elements.
- Two mechanical dials located at the side of the cylinder feature color temperature adjustability from 2700K warm to 3000K warm white to 4000K cool white with smooth and continuous integral brightness control. Remove the cap to reveal a dial that provides continuously adjustable beam angles from flood to spot for each light which can be adjusted independently.
- Magnetic or Electronic 12V power supply is required. Recommended power supply WAC Landscape Lighting Stainless Steel outdoor transformer: (75W) 9075-TRN-SS, (150W) 9150-TRN-SS, (300W) 9300-TRN-SS, (600W) 9600-TRN-SS.
- High Powered LED, Input: 9-15V AC, Power: 7.5W (13VA), Brightness: up to 650Lm, CRI: 85, Rated Hours: 50,000. Smooth and continuous dimming to 10% with a Magnetic Low Voltage Dimmer.
- Standards: UL & cUL 1838 and IP66 Rated for Wet Locations (See Specification Sheet for complete details).
Manufacturer Resources:
Manufacturer Resources
Product Specs
- ADA Compliant:
- Yes
- Bulb Base:
- Integrated LED
- Bulbs Included:
- Yes
- Collection:
- Estrella
- Dimmable:
- MLV
- Lumens:
- 440
- Number of Bulbs:
- 1
- Product Type:
- Monopoint
- Shade/Glass Description:
- Frosted Glass Lens
- Warranty:
- 10 Years Functional, 2 Years Finish
- Product Group:
- Outdoor Lighting
- Product Subgroup:
- Flush/Semi Flush
- Hardwired or Portable:
- Hardwired
- Avg Rated Hours:
- 50000
- Base Material:
- Aluminum
- Location Rating:
- Wet
- Brand Family:
- WAC Landscape
- Energy Star:
- No
- Wire Length:
- 6"
- Subcategory:
- Landscape Ceiling Lighting
- Certification:
- UL, cUL, IP66
- Glass Finish:
- Frosted Glass Lens
- Location Indoor/ Outdoor:
- Indoor/Outdoor
- Reversible Mounting:
- No
- Shade Material:
- Glass
- Title 24 Compliant:
- Yes
- Bulb Type:
- LED
- Segment:
- Lighting
- Product Voltage:
- 12V
- Product Length:
- 3.88"
- Light Temperature:
- 2700K-3000K-4000K
- Product Diameter:
- 2.42"
- Product Style:
- Contemporary
- Product Height:
- 4.18"
- Product Category:
- Landscape Lighting
- Product Width:
- 3.88"
- Product Wattage:
- 7.5W
WAC Lighting WAC-3831 – Frequently Asked Questions
1) Can the WAC Estrella 3831 monopoint run off an existing 12V landscape lighting system?
That is exactly what the Estrella 12V monopoint is built for. It takes 9-15V AC input at 7.5W (13VA), so it ties into an existing low voltage landscape run without pulling a new 120V circuit. A magnetic or electronic 12V power supply is required. WAC's stainless steel outdoor transformers are the recommended match: 9075-TRN-SS (75W), 9150-TRN-SS (150W), 9300-TRN-SS (300W) and 9600-TRN-SS (600W). The fixture ships with 10ft of low voltage burial cable and direct burial gel filled wire nuts, so the splice to the main run is covered.
2) Will a standard LED dimmer work on the Estrella 12V monopoint, or does it need a specific type?
It dims on a magnetic low voltage (MLV) dimmer only, and it goes smooth and continuous down to 10%. Pair it with a magnetic transformer and an MLV-rated wall dimmer. On top of that, the fixture itself has an integral brightness dial on the side of the cylinder, so you can trim output at each head without touching the dimmer at all.
3) Can I change the color temperature on the Estrella after it's installed?
Yes, and without swapping anything. Two mechanical dials on the side of the cylinder set color temperature at 2700K warm, 3000K warm white or 4000K cool white, and the second dial handles brightness. That is the whole reason it is one SKU instead of a dozen: you set the look on site to match the rest of the property rather than ordering a fixed-Kelvin head.
4) Is the Estrella monopoint rated for a fully exposed coastal install, or just covered areas like a pergola?
Both. The housing is cast from a k-alloy aluminum specifically engineered against corrosive elements and recommended for coastal and marine environments. It is factory sealed water tight, IP66 rated against high pressure water jets, carries a wet location rating, and is UL and cUL 1838 listed. Covered pergolas and cabanas are the common use, but exposed salt air is within what it is built for.
5) Can I wire the Estrella 12V monopoint straight to 120V line voltage?
No, and doing so will destroy it. The Estrella is a 12V fixture with a 9-15V AC input window and requires a magnetic or electronic 12V power supply between it and line voltage. If there is no low voltage supply on site, you need a transformer such as the 9075-TRN-SS or larger before this fixture goes in.
6) Can the beam angle be adjusted on the WAC 3831 Estrella, or is it a fixed flood?
Adjustable. Pull the cap off and there is a dial that moves the beam continuously from flood to spot, and each fixture is set independently. So on a pergola run you can tighten one head over a table and open another to wash a column, all from the same part number.
7) How much light does one Estrella 12V monopoint actually put out?
Rated up to 650 lumens from a 7.5W high powered LED, with 440 lumens listed as the nominal output and a CRI of 85. Because brightness is dialed continuously at the fixture, you set it where you want rather than picking a lamp wattage. Rated life is 50,000 hours on an integrated LED, so there is no bulb to stock or replace.
8) How many Estrella monopoints can I put on one WAC landscape transformer?
Size by VA, not watts. Each Estrella draws 7.5W but 13VA, so a 75W 9075-TRN-SS supports roughly five heads, a 150W 9150-TRN-SS about eleven, and the 9300-TRN-SS and 9600-TRN-SS scale from there. Leave headroom for voltage drop on long runs, since input must stay inside 9-15V AC at the fixture.
9) Does the WAC 3831 Estrella meet Title 24 for a California project?
Yes, it is listed as Title 24 compliant and also ADA compliant, which matters on commercial walkways and covered exterior ceilings. It is not Energy Star rated. For the inspector's file it is UL and cUL 1838 listed and IP66 rated for wet locations.
10) Can the Estrella monopoint be mounted facing up as well as down?
No. It is not a reversible mounting fixture, so plan the orientation before you drill. It is a hardwired monopoint with a frosted glass lens, intended to be mounted and aimed by the internal beam dial rather than flipped.
11) What size is the Estrella monopoint and how much lead wire does it have at the fixture?
Compact head: 3.88 inches long by 3.88 inches wide, 4.18 inches high, with a 2.42 inch cylinder diameter. Factory wire length at the fixture is 6 inches, and the package adds 10ft of low voltage burial cable plus gel filled direct burial wire nuts to reach the main run.
12) What finishes does the Estrella 12V monopoint come in?
Three: black (3831-27/30/40BK), bronze (3831-27/30/40BZ) and white (3831-27/30/40WT). All three carry the same 2700/3000/4000K adjustable color temperature, so the finish choice is purely how it reads against the soffit, beam or stone it mounts to.
How fast can I get the WAC Lighting WAC-3831 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the WAC Lighting WAC-3831 come with a warranty?
Absolutely. The WAC Lighting WAC-3831 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the WAC Lighting WAC-3831?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the WAC Lighting WAC-3831 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.