Low Voltage Multiple Spots 2 Light Housing
Features
- Input: 120 VAC, 50/60Hz
- Non IC
- ELV Dimming: 100-10%
- Construction: Aluminum hardware with mouth blown etched glass diffuser
- Electronic short circuit and overload protection with automatic reset
- Soft start to prolong lamp life
- Transformer concealed within the fixture
Manufacturer Resources:
Manufacturer Resources
Product Specs
- Product Group:
- Lighting
- Brand Family:
- WAC Limited
- Subcategory:
- Ceiling Lighting
- Segment:
- Lighting
- Department:
- Electrical
- Product Subgroup:
- Recessed Lighting
- Product Type:
- Recessed Housing
WAC Lighting MT-216HS – Frequently Asked Questions
1) Can the WAC MT-216HS two-light housing be installed in direct contact with insulation?
No. The MT-216HS is a Non-IC housing, so insulation must be held back from it. If the ceiling cavity is insulated, you need to maintain clearance around the housing or use an IC-rated fixture instead.
2) Does the WAC MT-216HS low voltage housing need a separate remote transformer?
No separate transformer run is needed. The transformer is concealed within the fixture itself, so you feed it line voltage directly: input is 120 VAC, 50/60Hz.
3) What kind of dimmer works with the WAC MT-216HS multiple spots housing?
It dims on an ELV (electronic low voltage) dimmer, with a range of 100 percent down to 10 percent. Specify an ELV-type control; a standard incandescent/forward-phase dimmer is not the matching control for this fixture.
4) Is the MT-216HS housing protected if a lamp shorts or the circuit is overloaded?
Yes. The fixture has electronic short circuit and overload protection with automatic reset, so it shuts down and recovers on its own rather than requiring a fuse change. It also uses a soft start to prolong lamp life.
5) How many lamp heads does the WAC MT-216HS housing carry?
It is a two-light housing, catalogued as the Low Voltage Multiple Two Light Non-IC Housing. If you need a single head on the opening instead, the one-light version of the Multiple Spots housing is the one to order.
6) What is the WAC MT-216HS made of, and will the glass look consistent across a run of fixtures?
Construction is aluminum hardware with a mouth blown etched glass diffuser. Because the diffusers are mouth blown, slight variation from piece to piece is normal in that kind of glass, while the etched finish keeps the light output diffused rather than a hard point source.
How fast can I get the WAC Lighting MT-216HS delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the WAC Lighting MT-216HS come with a warranty?
Absolutely. The WAC Lighting MT-216HS is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the WAC Lighting MT-216HS?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the WAC Lighting MT-216HS from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.