WAC Lighting Low Voltage Multi...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$230.00
$203.95
WAC Lighting Low Voltage Multiple Spots 1 Light Housing

WAC Lighting Low Voltage Multiple Spots 1 Light Housing

(No reviews yet) Write a Review

Model: MT-116HS
Selected Housing is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$230.00
$203.95
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Low Voltage Multiple Spots 1 Light Housing

Features

  • Input: 120 VAC, 50/60Hz
  • Non IC
  • ELV Dimming: 100-10%
  • Construction: Aluminum hardware with mouth blown etched glass diffuser
  • Electronic short circuit and overload protection with automatic reset
  • Soft start to prolong lamp life
  • Transformer concealed within the fixture

Manufacturer Resources:

Specification Sheet

Installation Guide

Manufacturer Resources

Product Specs

Product Group:
Lighting
Brand Family:
WAC Limited
Subcategory:
Ceiling Lighting
Segment:
Lighting
Department:
Electrical
Product Subgroup:
Recessed Lighting
Product Type:
Recessed Housing

WAC Lighting MT-116HS – Frequently Asked Questions

1) Can the WAC Lighting MT-116HS housing be installed in direct contact with insulation?
No. The MT-116HS is a Non-IC housing, so insulation has to be held back from it. If the ceiling cavity is insulated and you cannot keep the insulation clear of the housing, you need an IC-rated recessed housing instead.
2) Does the MT-116HS low voltage housing need a separate remote transformer?
No separate transformer run is needed. The transformer is concealed inside the fixture, and the housing is fed directly with 120 VAC line voltage at 50/60Hz. You wire it like a line voltage can and the low voltage conversion happens in the fixture.
3) What kind of dimmer do I need for the WAC MT-116HS multiple spots housing?
Use an ELV (electronic low voltage) dimmer. The MT-116HS dims 100 percent down to 10 percent on ELV control. A standard incandescent or MLV dimmer is the wrong match for this fixture's electronic transformer.
4) Is the MT-116HS a complete fixture or just the housing?
It is the housing portion of the WAC Multiple Spots low voltage system, ordered as the Low Voltage Multiple Single Light Non-IC Housing. It covers one light position, so a multi-head layout means one housing per spot plus the matching trim and lamp head to finish the opening.
5) What protects the MT-116HS if a lamp shorts or the circuit is overloaded?
The fixture has electronic short circuit and overload protection that resets automatically, so a fault shuts it down without a trip to the panel or a replaced fuse. It also uses a soft start to reduce inrush stress and prolong lamp life, which matters on fleets of fixtures in hospitality or multi-family where lamp changes are the real cost.
6) What is the WAC MT-116HS made of, and what does the glass look like?
Aluminum hardware with a mouth blown etched glass diffuser. The etched glass softens the beam rather than throwing a hard spot, which is why it gets specified in retail and residential ceilings where glare off a clear lens would be a problem.
7) Is there only one version of the WAC MT-116HS housing to order?
One configuration: the Low Voltage Multiple Single Light Non-IC Housing, part number MT-116HS. There is no IC variant or finish choice at the housing level, so the ordering decision is quantity plus whichever trim and head you pair with it.
How fast can I get the WAC Lighting MT-116HS delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the WAC Lighting MT-116HS come with a warranty?
Absolutely. The WAC Lighting MT-116HS is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the WAC Lighting MT-116HS?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the WAC Lighting MT-116HS from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!