You may also like
Washers 1/2 X 1-1/2 Fender SS (Jar 100)
Manufacturer Resources
Product Specs
- Ansi:
- ANSI
- Country Of Origin:
- United States
- Division:
- Electrical H1
- Pack Type:
- Jar
- Product Group:
- Fasteners
- Sub Division:
- Electrical-E H2
- Department:
- Electrical
- Product Subgroup:
- Washers
- Product Material:
- Stainless Steel
Metallics JW1201SSD – Frequently Asked Questions
1) What size bolt does the Metallics JW1201SSD fender washer fit?
The JW1201SSD is a 1/2 inch fender washer with a 1-1/2 inch outside diameter, so it takes a 1/2 inch bolt, lag, anchor, or threaded rod. The large OD relative to the hole is the point: it spreads load across sheet metal, strut, plywood, or an oversized hole where a standard 1/2 inch flat washer would pull through.
2) Are these 1/2 inch fender washers stainless steel, and can they be used outdoors?
Stainless steel, which is why they get specified for exterior and damp-location work: rooftop equipment supports, exterior strut runs, wet wells, and coastal or washdown areas where a plated or galvanized washer would bleed rust. Pair them with stainless bolts and nuts to keep the assembly from mixing metals.
3) How many washers come in a jar of Metallics JW1201SSD?
100 washers per jar. The jar pack is sold as the unit, so a single order gets you a service-truck or shop quantity rather than loose count pieces.
4) Can I use the Metallics JW1201SSD fender washer with strut and electrical equipment mounting?
Yes, that is the common use. Metallics catalogs these as electrical fasteners, and a 1/2 inch stainless fender washer is what gets used under nuts on 1/2 inch rod hanging strut trapeze, on panel and enclosure mounting through sheet steel, and over slotted strut holes where the washer needs to bridge the slot.
5) Are these fender washers made in the USA?
Country of origin is the United States, which matters on public works, federal, and institutional jobs carrying domestic-material requirements on fasteners.
6) Does the JW1201SSD follow a standard washer dimensional spec?
It is built to ANSI dimensional convention, so the 1/2 inch bore and 1-1/2 inch OD match what a drawing calling out a 1/2 inch ANSI fender washer expects. That is the detail an MRO or spec-driven buyer needs when standardizing one washer across a facility.
How fast can I get the Metallics JW1201SSD delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JW1201SSD come with a warranty?
Absolutely. The Metallics JW1201SSD is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JW1201SSD?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Metallics JW1201SSD from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.