You may also like
Washers 1/4 X 1-1/2 Octagnl St-zn (Jar 100)
Manufacturer Resources
Product Specs
- Ansi:
- ANSI
- Country Of Origin:
- MUL
- Division:
- Electrical H1
- Field Application:
- Electrical, Plumbing, Heating and Air Conditioning Industries
- Inside Diameter:
- 4-Jan IN
- Outside Diameter:
- 1/1/2002 IN
- Pack Type:
- Jar
- Product Group:
- Fasteners
- Sub Division:
- Electrical-E H2
- Washer Type:
- Octagonal Washer
- Department:
- Electrical
- Product Subgroup:
- Washers
- Product Finish:
- Zinc
- Product Length:
- 3 in
- Product Height:
- 3.6 in
- Product Material:
- Steel
- Product Weight:
- 2.53 lbs
- Product Width:
- 3 in
Metallics JHFW114 – Frequently Asked Questions
1) What size bolt does the Metallics JHFW114 octagonal washer fit?
The JHFW114 is a 1/4 inch washer, so it seats on 1/4 inch bolts, rods, and machine screws. The octagonal body measures 1-1/2 inches across, which spreads the load far wider than a standard 1/4 inch flat washer and is why it gets used over soft or oversized holes in sheet metal, wood, and panel work.
2) How many washers come in a jar of Metallics JHFW114?
One hundred washers per jar, packed in a jar rather than a box, which is what makes it convenient for a truck stock or a shop bench bin. Jar weight is listed at 2.53 lbs.
3) Are these octagonal washers OK for damp or outdoor electrical work?
They are zinc plated steel, which handles normal indoor and protected-exterior conditions but is not the choice for direct saltwater exposure or continuously wet locations. For those, step up to stainless. For typical conduit hangers, strut, and panel mounting the zinc finish is what most electrical and mechanical contractors run.
4) Will a 1-1/2 inch octagonal washer sit flat under a standard 1/4 inch nut?
Yes. The bore takes a 1/4 inch fastener and the flat octagonal face bears against the nut or bolt head with plenty of contact area left over. Because the outside is 1-1/2 inches across, check your clearance first if you are working inside a channel, a strut, or a tight box corner, since it will overhang where a standard round washer would not.
5) What trades actually use a 1-1/2 inch octagonal washer like this?
Metallics lists the JHFW114 for the electrical, plumbing, heating and air conditioning trades. The large octagonal face is used where a 1/4 inch fastener has to bear on a knockout, an oversized or slotted hole, or thin material that a small round washer would pull through.
How fast can I get the Metallics JHFW114 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JHFW114 come with a warranty?
Absolutely. The Metallics JHFW114 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JHFW114?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Metallics JHFW114 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.