Weslock 1345 Lexington Exterio...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$388.80
$219.84
Weslock 1345 Lexington Exterior Dummy Handleset

Weslock 1345 Lexington Exterior Dummy Handleset

(No reviews yet) Write a Review

Model: 01345-B--0020
From the Molten Bronze Collection
Selected Finish is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$388.80
$219.84
Adding to cart… The item has been added
Free Shipping on orders over $199.99
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Weslock DUMMY HANDLESET OVERVIEW

If security, safety, and style are important to you, then Weslock is your choice for quality hardware for your home. Not only are Weslock door handle and deadbolt products strong and long lasting, but they also offer a beautiful aesthetic for your home. With designs that enhance the look and feel of your home and details, such as concealed installation screws, that merge function and form, Weslock offers a product unmatched by the competition.


Standard features

  • Exceeds ANSI A 156.2 Grade II lock standards
  • Solid Molten Brass
  • 1” Throw bolt with two hardened steel rollers prevent sawing
  • Removable knob/lever prevents scratching during installation
  • Fits doors prepared with 2-1/8” top (1-5/8“ optional) and 2-1/8” bottom cross holes and 1” edge hole
  • 5-1/2” minimum center to center cross hole spacing
  • Optional door thickness up to 2-1/4”
  • Adjusts to door thickness from 1-3/4” - 2”
  • Limited Lifetime Mechanical Warranty
  • Limited 10 Year Finish Warranty

Manufacturer Resources

Product Specs

Product Group:
Mechanical Locks
Series:
Molten Bronze Series
Warranty:
Limited Lifetime Mechanical and Limited 10 Year Finish
Collection:
Molten Bronze
Keyed:
No
Cross Bore:
2-1/8"
Product Subgroup:
Bored Locksets
Product Type:
Exterior Handle Only
Subcategory:
Residential Handlesets
Commercial/Residential:
Residential
Keyed Function:
Non-Keyed
Lock Function:
Dummy
IMAP Policy:
Yes
Product Function:
Dummy
Door Thickness Range:
1-3/4" to 2"
Product Style:
Stonebriar
Product Substrate:
Brass
Product Category:
Mechanical Locks
Department:
Door Hardware

Weslock 01345-B--0020 – Frequently Asked Questions

1) Does the Weslock 1345 Lexington dummy handleset actually lock, or is it just a pull?
It's a pull. The 1345 Lexington is a dummy function handleset, non-keyed, with no latch and no cylinder. It mounts to the door face as a fixed trim piece, so it's what you use on the inactive leaf of a pair of doors or on a door held shut by a separate deadbolt or roller catch. If you need the door to latch or key, you need an entrance or keyed-entry handleset instead.
2) Will the Weslock 1345 handleset fit a 1-3/8 inch door?
No. The 1345 Lexington is built for thicker doors, 1-3/4 to 2 inches as standard, with a second option covering 2 to 2-1/4 inches. On a 1-3/8 inch door, which is the common older interior thickness, the mounting posts run long and the handleset won't draw up tight. For a 1-3/8 inch door, the Schlage Residential F92 Custom Addison is a dummy exterior handleset rated 1-3/8 to 1-3/4 inches.
3) I have a 2 inch thick entry door. Do I have to order something different for the Weslock 1345?
Door thickness is a required selection on the 1345, not an afterthought. Two choices: 1-3/4 inch to 2 inch (standard) and 2 inch to 2-1/4 inch. A true 2 inch door sits at the top of the standard range, so standard covers it. Anything heavier than 2 inches, up to 2-1/4, takes the second option. Pick it at the time of order, since it changes the hardware that ships.
4) What door prep does a Weslock Molten Bronze handleset need? Will it drop into my existing bore?
The Lexington takes a 2-1/8 inch top cross bore (1-5/8 inch is an option) and a 2-1/8 inch bottom cross bore, with a 1 inch edge bore. Center to center between those two cross holes has to be at least 5-1/2 inches. That's the number that catches people on a retrofit: a standard single-bore door drilled for one 2-1/8 inch hole doesn't have the second bore, so the door needs re-prepping. Measure your existing hole spacing before you order.
5) Is the Weslock 1345 the exterior half only, or does it come with interior trim?
Exterior handle only. The 1345 Lexington is the outside half of the handleset, so whatever knob, lever, or interior plate goes on the inside face is a separate order. On a dummy application that's often nothing at all, but if you want matching interior trim, specify it separately.
6) I need a handleset that actually locks the door, not a dummy - what should I order instead of the Weslock 1345 Lexington?
The 1345 Lexington is dummy function and non-keyed, so it is a pull with no latch and no cylinder - it will not secure an opening. For a keyed exterior entry, the Schlage Residential F58 Addison is an active handleset with a C keyway, Entrance function and Grade 2 certification in the F Series, and the Schlage Residential JH58 with Barcelona trim is a single cylinder Entrance handleset with a C keyway in the J Series at Grade 3. Both take a key on the outside; the 1345 Lexington does not.
7) What is the closest dummy handleset equivalent to the Weslock 1345 Lexington from another brand?
The Schlage Residential F92 Custom Addison Dummy Exterior Handleset is the direct counterpart. Both are dummy-function exterior handlesets with no keying: the Weslock 1345 Lexington is a non-keyed dummy exterior handle, and the F92 Addison carries a Dummy product function in Schlage's FC Series with a Grade 2 rating. The difference that matters at the opening is door thickness - the 1345 Lexington is built for doors 1-3/4 inch to 2 inch, while the F92 Addison covers 1-3/8 inch to 1-3/4 inch, so measure the slab before you cross-substitute.
8) My door is thicker than 2 inches - what handleset covers it if the Weslock 1345 Lexington does not?
The 1345 Lexington adjusts to doors 1-3/4 inch to 2 inch as standard, with an optional configuration for thickness up to 2-1/4 inch. If you want a keyed handleset rated for the thicker slab from the start, the Schlage Residential FCT58 Custom Addison Keyed Entry Single Cylinder Handleset lists a door thickness range of 1-5/8 inch to 2-1/4 inch in the FCT Series at Grade 2, with an exterior half plate. Note the function change: the FCT58 is Entrance, so it brings a cylinder the dummy 1345 does not have.
9) I am replacing a Schlage F92 Addison dummy handleset - will the Weslock 1345 Lexington drop into the same door prep?
Check the slab thickness first, because that is where the two part company. The Schlage Residential F92 Custom Addison dummy is listed for doors 1-3/8 inch to 1-3/4 inch, while the Weslock 1345 Lexington adjusts to 1-3/4 inch to 2 inch, with an optional setup to 2-1/4 inch. The 1345 Lexington fits doors prepared with a 2-1/8 inch top cross hole, 1-5/8 inch optional, a 2-1/8 inch bottom cross hole, a 1 inch edge hole, and a minimum 5-1/2 inch center-to-center cross hole spacing. A 1-3/4 inch door sits in both ranges; anything thinner stays with the F92.
10) What is the Weslock Lexington handleset made of, and will it hold up on a front door that gets weather?
Solid molten brass, cast rather than plated sheet. That's the substrate across the Molten Bronze Series. Brass is the standard choice for an exterior entry pull because it doesn't rust and it takes a durable finish. The 1345 ships in Bright Brass.
11) Is the Weslock 1345 handleset rated for commercial use on an apartment building or office?
It's a residential product. The 1345 Lexington is classified residential and falls in the residential handleset range, so it suits single family homes and the entry doors of a townhome or a small multi-family unit. For a commercial opening carrying an ANSI Grade 1 or a fire door spec, this isn't the part.
12) I need a dummy handleset for the inactive half of a double door. Is the Weslock 1345 or the Schlage F92 the right one?
Both are dummy exterior handlesets, and the deciding factor is door thickness. The Weslock 1345 Lexington covers 1-3/4 to 2 inches standard, with an option out to 2-1/4. The Schlage F92 Custom Addison covers 1-3/8 to 1-3/4 inches. Thin door, go Schlage; thick door, go Weslock. Where they overlap at 1-3/4 inches, it comes down to styling and what's on the active leaf, since you'll want the pair to match.
13) Is the Schlage FCT58 exterior half plate the same kind of part as the Weslock 1345 Lexington exterior handle?
They look similar on a parts list but behave differently. The Weslock 1345 Lexington is a dummy, non-keyed exterior handle in the Molten Bronze Series - a surface-mounted pull with no cylinder. The Schlage Residential FCT58 Custom Addison is a keyed entry single cylinder handleset whose exterior half plate carries a cylinder, listed with an Entrance function in the FCT Series at Grade 2. If you are trimming an inactive leaf of a double door and want no key, the 1345 Lexington is the dummy; the FCT58 half plate is part of a keyed assembly.
14) How do the grade ratings compare between the Weslock 1345 Lexington and the Schlage residential handlesets?
The Weslock 1345 Lexington is built to exceed ANSI A156.2 Grade 2 lock standards and is a residential handleset in solid molten brass. Among the Schlage residential handlesets, the F92 Addison dummy, the F58 Addison active handleset and the FCT58 Custom Addison are each Grade 2, while the JH58 with Barcelona trim is Grade 3. If a property is being standardized to a single grade across its entrances, the Grade 2 group keeps the dummy and the keyed openings on the same rating.
15) Can I mix a Weslock 1345 Lexington dummy with Schlage keyed handlesets on the same building and have them key alike?
Keying is not a factor on the 1345 Lexington itself - it is a non-keyed dummy with no cylinder, so it never enters a key system and can sit alongside any brand. The keyed openings are what have to match each other: the Schlage Residential F58 Addison active handleset and the JH58 with Barcelona trim are both built around the Schlage C keyway, so those two can share a key system while the Weslock dummy simply pulls the door.
16) What finish does the Weslock 1345 Lexington come in?
Bright Brass is the finish offered on the 1345 Lexington. If you're matching a fleet of doors already running a satin nickel or oil-rubbed bronze, this one won't match, and finish is not something you can change in the field on a cast brass handleset.
How fast can I get the Weslock 01345-B--0020 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Weslock 01345-B--0020 come with a warranty?
Absolutely. The Weslock 01345-B--0020 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Weslock 01345-B--0020?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Weslock 01345-B--0020 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!