Metallics JFMP127 10-24 x 3 in...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$50.60
$0.60
Metallics JFMP127 10-24 x 3 in. Flat Head Phillips Machine Screws - Steel Zinc - 100qty

Metallics JFMP127 10-24 x 3 in. Flat Head Phillips Machine Screws - Steel Zinc - Each

(No reviews yet) Write a Review

Model: JFMP127
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$50.60
$0.60
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
10-24 x 3 in. Flat Head Phillips Machine Screws - Steel Zinc - 100qty

  • Additional Notes

    • Other sizes and quantities available by request | Hardness and tensile strength standards are offered as guides only for stainless machine screws. There is currently no national standard for these performance requirements for stainless machine screws.

  • Features

    • Zinc yellow screws are popular in electronics applications.
    • Flat head with Phillips Drive
    • 10-24 Diameter, 3" Length
    • Steel Zinc Material

Manufacturer Resources

Product Specs

Minimum Purchase:
100 units
Arra Compliant:
N
Buy American Compliant:
No
Dimensional Standard:
ASME B18.6.3-1998
Division:
Electrical H1
Drive Type:
Phillips
Driver Size:
#2
Fastener Head Height:
0.098 - 0.116 in.
Fastener Head Type:
Flat
Fastener Head Width:
0.333 - 0.362 in.
Fastener Length:
3
Field Application:
Electrical, Plumbing, Heating and Air Conditioning Industries
Gaging Diameter:
0.313
Hardness:
Rockwell B70-B100
Language Code:
EN
Material Standard:
AISI 1006 - 1022
Neurspe:
https://ideadigitalasset.com/DAMRoot/Original/10035/11237_ID-SPE-v1-ID-SPE-v1-Flat_Head_Mach_Screw.pdf
Order Minimum Imperial:
100
Order Minimum Uom Imperial:
JR
Pack Type:
Jar
Phillips Recess Depth:
0.124
Phillips Recess Diameter:
0.198
Phillips Recess Width:
0.032
Product Group:
Fasteners
Product Height:
5.75 in
Product Length:
3.5 in
Product Weight:
2.01 lbs
Product Width:
3.5 in
Protrusion Gaging Diameter:
0.025 - 0.042 Above
Sub Division:
Electrical-E H2
Tensile Strength:
1050 lb minimum
Thread Per Inch:
24
Thread Standard:
ANSI/ASME B1.1
Thread Type:
UNC
Department:
Electrical
Product Subgroup:
Screws
Product Type:
Machine Screw
Type2:
Machine Screw
Series:
FM and FMP
Product Finish:
Zinc
Product Details:
Machine Screw
Product Material:
Steel Zinc

Metallics JFMP127 – Frequently Asked Questions

1) Is the Metallics JFMP127 machine screw sold individually or by the box?
The JFMP127 ships as a jar of 100 screws, and 100 is the order minimum. So you are buying a jar, not a loose piece. The packed jar weighs 2.01 lbs.
2) What thread does a 10-24 x 3 in. flat head machine screw take, and will it run into a standard 10-24 tapped hole?
It is a #10 screw with 24 threads per inch, UNC (coarse) thread cut to ANSI/ASME B1.1. That is the standard 10-24 machine screw thread, so it will run into any 10-24 tapped hole or 10-24 nut, including device boxes and fixture straps tapped 10-24.
3) Does the Metallics JFMP127 screw meet Buy American requirements for a government job?
No. The JFMP127 is not Buy American compliant and is not ARRA compliant, with multiple countries of origin. If your project carries a domestic sourcing clause, this is the wrong line item.
4) What size Phillips bit drives these Metallics flat head screws?
A #2 Phillips. The recess measures 0.198 in. diameter, 0.124 in. deep, with a 0.032 in. slot width, which is standard #2 geometry. Use a sharp #2 bit; a #1 will cam out and a #3 will not seat.
5) Is a zinc plated steel machine screw okay for outdoor or damp locations?
These are steel with a zinc finish, which is a plating for dry indoor service. For wet locations, exterior mounting, or anywhere washdown or salt is a factor, specify a stainless 10-24 machine screw instead. The zinc yellow finish is common in electronics and panel work.
6) How much load will a 10-24 steel zinc machine screw hold?
Rated at 1,050 lb minimum tensile, with the steel running Rockwell B70 to B100 hardness from AISI 1006-1022 stock. That is a general-purpose low carbon machine screw, not a structural or graded bolt, so size it for fixture and device mounting rather than for structural loads.
7) Is the 3 inch length measured including the head?
Length is 3 in. Flat head screws are measured overall, head included, under ASME B18.6.3-1998, so the usable grip below the surface of a countersunk hole is the full 3 in. less the head height of 0.098 to 0.116 in.
8) What are 10-24 x 3 in. flat head machine screws typically used for?
Long 10-24 flat heads like this are stocked for electrical, plumbing, and HVAC work: pulling device plates and fixture straps through thick build-ups, reaching into deep boxes or through furring and plaster rings, and general panel and equipment mounting where the head has to finish flush.
How fast can I get the Metallics JFMP127 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JFMP127 come with a warranty?
Absolutely. The Metallics JFMP127 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JFMP127?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics JFMP127 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!