Metallics JPMP37 10-24 x 3/4 i...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$50.46
$0.46
Metallics JPMP37 10-24 x 3/4 in. Pan Head Phillips Machine Screws - Steel Zinc - 100qty

Metallics JPMP37 10-24 x 3/4 in. Pan Head Phillips Machine Screws - Steel Zinc - Each

(No reviews yet) Write a Review

Model: JPMP37
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$50.46
$0.46
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
10-24 x 3/4 in. Pan Head Phillips Machine Screws - Steel Zinc - 100qty

  • Features

    • Steel Zinc Material
    • Pan head with Phillips Drive
    • 10-24 Diameter, 3/4" Length

  • Additional Notes

    • Other sizes and quantities available by request | Tensile strength values for stainless screws are offered as approximations only; there is no single standard for the performance requirements of stainless machine screws.

Manufacturer Resources

Product Specs

Minimum Purchase:
100 units
Arra Compliant:
C
Buy American Compliant:
C
Dimensional Standard:
ASME B18.6.3-2010
Division:
Electrical H1
Drive Type:
Phillips
Driver Size:
#2
Fastener Head Color:
Silver
Fastener Head Height:
0.122 - 0.133 in.
Fastener Head Type:
Pan
Fastener Head Width:
0.357 - 0.373 in.
Fastener Length:
4-Mar
Hardness:
Rockwell B70-B100
Language Code:
EN
Material Standard:
AISI 1006 - 1022
Neurspe:
https://ideadigitalasset.com/DAMRoot/Original/10035/11237_ID-SPE-v1-ID-SPE-v1-Pan_Head_Screw_St_SS.pdf
Order Minimum Imperial:
100
Order Minimum Uom Imperial:
CT
Pack Type:
Jar
Phillips Recess Diameter:
0.192
Product Group:
Fasteners
Product Height:
2.15 in
Product Length:
3 in
Product Weight:
0.65 lbs
Product Width:
3 in
Recess Penetration Gaging Depth:
0.089 - 0.113
Sub Division:
Electrical-E H2
Tensile Strength:
60000 psi minimum
Thread Per Inch:
24
Thread Type:
UNC
Department:
Electrical
Product Subgroup:
Screws
Product Type:
Machine Screw
Type2:
Machine Screw
Series:
PMP
Product Finish:
Zinc
Product Details:
Machine Screw
Product Material:
Steel Zinc

Metallics JPMP37 – Frequently Asked Questions

1) Will a 10-24 machine screw thread into a standard electrical box or device ring?
Yes. The Metallics JPMP37 is a 10-24 UNC machine screw, which is the thread used on steel outlet box and device ring mounting holes, so it threads into tapped box ears, mud rings and strap-mounted devices. Thread count is 24 per inch and the thread form is UNC.
2) Are these Metallics machine screws rated for a Buy American or ARRA-funded job?
Both the Buy American and ARRA compliance flags on the JPMP37 are marked compliant. Country of origin is listed as multiple.
3) What screwdriver or bit do I need for these pan head Phillips screws?
A #2 Phillips bit. The recess on the JPMP37 is a Phillips with a 0.192 in. recess diameter and a gaging depth of 0.089 to 0.113 in., so a #2 driver seats fully. A #1 will cam out and a #3 will not bottom in the recess.
4) How far does the head sit off the surface, and will it clear a cover plate?
The pan head on these screws measures 0.357 to 0.373 in. across with a head height of 0.122 to 0.133 in. That is a low, rounded profile under an eighth of an inch tall, so it sits nearly flush behind flat cover plates and device plates rather than standing proud like a round or truss head.
5) What dimensional standard do these screws conform to?
Dimensions follow ASME B18.6.3-2010, the standard for inch-series machine screws, and the steel is AISI 1006 to 1022. That means the head and thread geometry will match any other B18.6.3 pan head 10-24, so they interchange with spec'd fasteners on a submittal.
6) How strong are these screws, and can I torque them down hard?
Minimum tensile strength is 60,000 psi with a hardness of Rockwell B70 to B100. That is standard low-carbon steel machine screw strength, fine for device, box, panel and fixture mounting. It is not a structural or high-strength grade, so do not substitute them where a graded bolt is called out.
7) Is zinc-plated steel okay outdoors or in a damp location?
The JPMP37 is zinc-plated carbon steel, which handles dry interior and occasional-damp work but will eventually corrode in wet, exterior or washdown locations. For those openings use a stainless machine screw in the same 10-24 x 3/4 in. size instead.
8) How are these 10-24 x 3/4 in. screws packaged, and what is the minimum order?
They come in a jar of 100, and 100 count is the order minimum. Shipping weight for the jar is 0.65 lbs.
How fast can I get the Metallics JPMP37 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JPMP37 come with a warranty?
Absolutely. The Metallics JPMP37 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JPMP37?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics JPMP37 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!