You may also like
25476 Viega MegaPressG tee Smart Connect technology Carbon steel, 2'' x 2'' x 1-1/2''
Manufacturer Resources
Product Specs
- Connection Type:
- P1 x P2 x FPT
- Material Type:
- Carbon Steel
- Product Dimension:
- 2'' x 2'' x 1-1/2''
- Department:
- Plumbing
- Product Group:
- Plumbing Fittings
- Product Subgroup:
- Tees
- Product Type:
- Tee
- Product Length:
- 7.547"
- Product Height:
- 2.894"
- Product Weight:
- 2.601 lbs
- Product Width:
- 3.858"
- Product Material:
- Carbon steel
Viega 25476 – Frequently Asked Questions
1) What are the three connections on the Viega MegaPressG 25476 tee?
The 25476 is a 2 inch x 2 inch x 1-1/2 inch tee with a P1 x P2 x FPT configuration. The two 2 inch ends are press connections that go onto the run of pipe, and the 1-1/2 inch branch is a female pipe thread, so you thread into that outlet rather than pressing it. That makes it the fitting to use when you need to pick up a threaded valve, drip leg, or appliance connection off a 2 inch pressed line without adding a separate press-by-thread adapter.
2) Is the MegaPressG 25476 tee for gas, or can I use it on water lines?
MegaPressG is Viega's gas line system, and the 25476 is a MegaPressG carbon steel fitting. The G designation and its sealing element are what separate it from standard MegaPress used on hydronic and water service. Do not mix the two systems on the same run; if you are pressing black iron for water or hydronic heating, you want the standard MegaPress carbon steel tee in the same size instead.
3) What pipe does the 2 inch press end of the Viega 25476 tee go on?
The press ends are carbon steel MegaPressG, so they go on 2 inch black iron or carbon steel pipe, not copper and not stainless. Copper tube takes ProPress; stainless takes MegaPress Stainless. Matching the fitting material to the pipe material is not optional on a press system.
4) What does Smart Connect technology on this Viega tee actually do for the installer?
Smart Connect is Viega's unpressed-connection feature: on a pressure test, a connection that was left unpressed leaks in a controlled way so the installer finds it before the job is closed in. On a 2 inch gas tee sitting in a mechanical room, that is the difference between catching a missed press at test and catching it after the ceiling is up.
5) Can I reduce straight to 1-1/2 inch press with this tee instead of threading?
No. On the 25476 the 1-1/2 inch branch is a female thread, not a press socket. If you want a pressed 1-1/2 inch branch off a 2 inch run, you need the MegaPressG reducing tee with three press ends rather than this press-by-press-by-FPT version.
How fast can I get the Viega 25476 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Viega 25476 come with a warranty?
Absolutely. The Viega 25476 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Viega 25476?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Viega 25476 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.