You may also like
3.5 INCH RIGID LL CONDUIT BODY
Manufacturer Resources
Product Specs
- Application:
- For Use with Rigid/IMC Conduit
- Number Of Batteries:
- 0
- Product Group:
- Conduit & Fittings
- Product Type:
- Conduit Body - Series A - Rigid/IMC
- Department:
- Electrical
- Product Subgroup:
- Conduit Bodies
- Product Material:
- Aluminum Die Cast
Red Dot ALL-9 – Frequently Asked Questions
1) What does the LL designation on the Red Dot ALL-9 conduit body mean, and which way does the opening face?
LL is a back-outlet-free, single-side body: the conduit runs straight through and the removable cover opening is on the left side as you look at the body with the conduit hubs running vertically. It is a Series A style body for rigid and IMC conduit. If you need the opening on the right, you want the LR version instead; if you need it on the back, that is an LB.
2) Will the Red Dot ALL-9 thread onto 3-1/2 inch rigid steel conduit?
Yes. The ALL-9 is a 3-1/2 inch body with threaded hubs for rigid metal conduit, and it also takes 3-1/2 inch IMC since IMC uses the same NPT thread as rigid. It will not work with EMT, which is unthreaded.
3) Is the ALL-9 conduit body aluminum or iron, and can I use it on a run of galvanized rigid steel conduit?
The ALL-9 body is die cast aluminum. It threads onto galvanized rigid steel conduit without issue, but on a wet or corrosive exterior run keep in mind you are joining dissimilar metals, so an iron/malleable body is the usual choice where the whole system is steel. Aluminum is normally specified where the conduit itself is aluminum or where weight matters.
4) I have a 3-1/2 inch conduit run that has to turn at a wall. Is an LL body the right fitting, or should I use a sweep elbow?
Use the LL body when you need a turn plus access for pulling; the removable cover gives you a hand into the raceway, which matters a lot on 3-1/2 inch conductors. Use a factory sweep or field bend instead when the conductors are large enough that the bending radius inside a conduit body would damage insulation, since conduit bodies are not rated as pulling elbows for every conductor size. For a straight-through turn with no pull access needed, an elbow is the cleaner choice.
5) What is the Red Dot part number I should put on the purchase order for a 3-1/2 inch aluminum LL body?
Red Dot ALL-9. That is the manufacturer part number for the 3-1/2 inch rigid/IMC aluminum LL conduit body, and it is the only configuration offered under that number.
How fast can I get the Red Dot ALL-9 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Red Dot ALL-9 come with a warranty?
Absolutely. The Red Dot ALL-9 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Red Dot ALL-9?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Red Dot ALL-9 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.