You may also like
3inch RIGID LL CONDUIT BODY
Manufacturer Resources
Product Specs
- Application:
- For Use with Rigid/IMC Conduit
- Number Of Batteries:
- 0
- Product Group:
- Conduit & Fittings
- Product Type:
- Conduit Body - Series A - Rigid/IMC
- Department:
- Electrical
- Product Subgroup:
- Conduit Bodies
- Product Material:
- Aluminum Die Cast
Red Dot ALL-8 – Frequently Asked Questions
1) What does the LL designation on the Red Dot ALL-8 conduit body mean, and which side does the opening face?
LL is a left-hand access body: the conduit runs straight through and the removable cover opening sits on the left side as you face the body with the conduit running away from you. Use an LR when you need the opening on the right, a C body when you need it in line with the run, and a T body when you are pulling three ways. The ALL-8 handles 3 inch rigid or IMC conduit.
2) Will the Red Dot ALL-8 thread onto 3 inch IMC, or is it rigid only?
Both. The ALL-8 is built for 3 inch rigid metal conduit and IMC, which share the same threading, so it takes either without an adapter. It will not accept EMT directly, since EMT is unthreaded; you would need a threaded EMT connector or coupling to transition into the hub.
3) Is the ALL-8 conduit body aluminum or iron, and can I use it on an aluminum conduit run?
Die cast aluminum. That makes it the consistent choice on an aluminum conduit system and avoids the dissimilar-metal pairing you get when you put a malleable iron body on aluminum conduit. On a galvanized rigid steel run, aluminum bodies are commonly used but if your spec calls out iron bodies throughout, order the iron equivalent instead.
4) What is the exact part number to order for a Red Dot 3 inch LL conduit body?
Red Dot ALL-8. That is the manufacturer part number and the only model on the item, a Series A aluminum LL body for 3 inch rigid or IMC.
5) Does the Red Dot ALL-8 come with a cover and gasket, or do I order those separately?
The ALL-8 is the body itself. Series A conduit bodies take a separate cover plate and gasket sized to the body, so plan on a 3 inch Series A cover and the matching gasket with it. Confirm which cover type you want (blank stamped steel or aluminum, or a neoprene-gasketed cover for wet locations) before you place the order.
6) Can I use a 3 inch LL conduit body as a pull point or junction for splices?
An LL body like the ALL-8 is primarily a pull and direction-change fitting. Splicing inside a conduit body is only permitted where the body is durably marked with its volume by the manufacturer and is supported independently of the conduit, per NEC rules on conduit bodies. If you need a splice point, verify the body carries a volume marking; otherwise use it for pulling only and splice in a box.
How fast can I get the Red Dot ALL-8 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Red Dot ALL-8 come with a warranty?
Absolutely. The Red Dot ALL-8 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Red Dot ALL-8?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Red Dot ALL-8 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.